muisyle wrote:
I can not transfer samygo on TV "firmware 1106"
connecting as develop insert ip of the computer but appears on the TV connecting and nothing happens
Hello Good morning dear muisyle
To solve your problem, do the following:
Point 1:. You enter the service menu (
INFO MENU MUTE POWER)
Point 2:. Come early as the First Option Factor Reset and then you push enter on the remot control
Point 3:. Waits a little tv will restart
Point 4:. Ai start to configure it again Contry, channels, Postcode, Networking Etc.
Point 5:. You go to menu and Apps SmarTV you load other
Point 6:.
I'm gonna give you my ip (tentative) only to solve your problem (82.103.7.226)
Point 7:. You going Ip setings and you put it my ip then sync the apps instalas widguet samyGO is fast and you will see a icon with the name (Samygo-2013)
Point 8:. Low this file in zip
http://82.103.7.226/data.zip
Point 9:. Descompact for Driver Usb flash formatted in FAT32 and it will have to stay with the
folder name (data) at
the root, and inside the folder (data) must have (libSkype.so) and (AutoStart)
Point 10:. You turn off/on the TV and you put the usb pen drive, and alloys tv, then you will SamsungSmarttv clicks on the menu, and corresponding application SamyGo_2013 will you open a menu in Portuguese eheheheh clicks (Enter) then in the
ves (Ok) (Ok) will appear (Sim) (Sim) two
Point 11:.
You turn off the tv in the Power (Red) and turns connecting you go to Apps and you click on the Skype application if it appears and rotating andnot start your Tv is in root mode, it appears Skype start section turns to the point (9) and (10)
Hug hope I have helped you
This was translated with Google translator
Note: This method works on all firmware versions 2013 Series F
Portugues
Ol? Bom dia caro muisyle
Para resolver o teu problema faz o seguinte:
Ponto 1:. Entras no menu de servi?o (
INFO MENU MUTE POWER)
Ponto 2:. Entra logo no Primeiro Op??o de seguida Fator Reset e pressionas enter no control remot
Ponto 3:. Esperas um pouco a tv vai reiniciar
Ponto 4:. Ai come?as a configura-la de novo Pais, canais, C?digo Postal, Rede Etc.
Ponto 5:. Vais ao menu de Apps smartv e vais carregar outras
Ponto 6:.
Vou-te ceder-te o meu ip (provis?rio) s? para resolver o teu problema (82.103.7.226)
Ponto 7:. Vais a Ip Setings e colocas la o meu ip em seguida sincronizar apps instalas o widguet samyGO ? r?pido e vai aparecer um icon com o nome de (Samygo-2013)
Ponto 8:. Baixa este ficheiro em zip em
http://82.103.7.226/data.zip
Ponto 9:.
Descompactas para a pen Driver Usb formatada em FAT32 e la te que ficar com o nome da pasta (data) na raiz, e dentro da pasta (data) tem que ter (libSkype.so) e (AutoStart)
Ponto 10:.
Desligas a TV e colocas a pen drive usb, e ligas a tv, de seguida vais clicas no menu SamsungSmarttv, e corres a aplica??o SamyGo_2013 vai- te abrir um menu em Portugues eheheheh clicas (Enter) de seguida em ves de (Ok) (Ok) vai aparecer (Sim) (Sim) duas vezes
Ponto 11:. Desligas a tv no Power (Vermelho)e voltas a ligar vais a Apps e clicas na aplica??o Skype se ela aparecer e ficar a rodar en?o arrancar a tua Tv est? em modo root, se aparecer no Skype iniciar a se??o voltas ao ponto (9) e (10)
Abra?o espero ter-te ajudado
Isto foi traduzido no Google tradutor
Nota: este m?todo funciona em todas as vers?es de firmware S?ries F 2013