Samsung TV Firmware on the GO
http://forum.samygo.tv/
Code: Select all
mkdir /tmp/mntCode: Select all
/dtv/bin/mount -o loop /dtv/usb/sda1/SamyGO/samyext4.img /tmp/mntsectroyer wrote:try one more thing:and then:Code: Select all
mkdir /tmp/mntCode: Select all
/dtv/bin/mount -o loop /dtv/usb/sda1/SamyGO/samyext4.img /tmp/mnt
Code: Select all
VDLinux#> mkdir /tmp/mnt
VDLinux#> /dtv/bin/mount -o loop /dtv/usb/sda1/SamyGO/samyext4.img /tmp/mnt
mount: mounting /dev/loop3 on /tmp/mnt failed: Input/output error
VDLinux#>
sectroyer wrote:Sorry dude really problem with USB... Nothing can be done... All commands fail always with same result...
thanks for your support mate 
Well for me these commands work on ANY usb that I haveDeus3X wrote:
p.s. Can i turn of the tv right?
Don't you have some USB disk for recordings ?i don't use usb for recording.. but atm i have lots of usb:sectroyer wrote:Well for me these commands work on ANY usb that I haveDeus3X wrote:
p.s. Can i turn of the tv right?
Shut down TV. Unplug usb with rooting data. Plug one of your Free usb disk. Start TV and once it loads hit RECDeus3X wrote:i don't use usb for recording.. but atm i have lots of usb:sectroyer wrote:Well for me these commands work on ANY usb that I haveDeus3X wrote:
p.s. Can i turn of the tv right?
1x 32 gb usb 2.0 kingston
2x 64 gb usb 3.0 sandisk
1x 8gb usb 3.0 TDK (the one used for the test)
and some usb 2.0 with no mark
all that usb worked for my f series samsung.
i used the crappedone to root my f8000 with the donator's method
It will ask if it can format the disk format and recording something than get back shutdown tv attach SECOND usb (the one with rooting data), start TV and get back here Hehe you are not rooting ?marius2du wrote:Pardon to interfere in your troubleshooting conversation. But on H series you got 2 USB 2.0 ports and 1 USB 3.0 port, at least. Maybe you're plugging a usb 3.0 stick into usb 2.0 port. I would use usb 2.0 stick with usb 2.0 port for such case.
