SamyGO

Posted: **Sun Jun 21, 2015 3:16 pm**

21/06/2015
-fixed Apache
-added T-NT telnet support 
-fixed T-NT cifs module
=====================================

https://www.sendspace.com/file/zq8pqh

Posted: **Sun Jun 21, 2015 3:18 pm**

UE32H5410 device here.

Did all the steps and as you can see in the attach (Pic 1) it worked, but when i try to telnet (Pic 2) I get "/bin/sh: can't access tty; job control turned off" and I cannot use any command in telnet. In meantime trying from a browser on a PC from the same home network I can get FTP access as seen in the picture (Pic 3). Also, PVRDecoder cannot fully connect. As you can see in the picture (Pic 4) it starts, connects to ftp but cannot connect to telnet.

I did all home router port things, also there is no firewall on the PC I am trying to connect.

Is there something I am doing wrong or there are additional steps I have to further do? Can anyone help? Thanks in advance!

PS. Don't mind the "Model: UE32H6600" on the status bar screenshot of PVRDecoder attached here. I changed the model through the system menu to try something. The model I have is UE32H4510.

Posted: **Sun Jun 21, 2015 3:22 pm**

Looks like your TV is rooted but you didn't post the info whether about OTN Support. Did you disable it ASAP?

Posted: **Sun Jun 21, 2015 3:29 pm**

Thank you for your response. Yes, the fist thing I did was to disable OTN and OTA

Posted: **Sun Jun 21, 2015 3:35 pm**

acadoni wrote:Thank you for your response. Yes, the fist thing I did was to disable OTN and OTA

Very good

Now you are on the safe side

Posted: **Sun Jun 21, 2015 3:42 pm**

sectroyer wrote:Very good Now you are on the safe side

I always pay attention to instructions

So I am doing everything ok you are saying and still I cannot connect properly. Right now I saw a new posting from you with a new samy.zip from sendspace. Do you need me to try to retry the whole process with the new file and see if it works?

Posted: **Sun Jun 21, 2015 4:43 pm**

You CAN connect you posted a lot of evidence for that:) Even different protocols worked... Maybe you disconnected usb while TV was ON:)

Posted: **Sun Jun 21, 2015 4:55 pm**

sectroyer wrote:You CAN connect you posted a lot of evidence for that:) Even different protocols worked... Maybe you disconnected usb while TV was ON:)

Nope, both rooting USB and recordings USB connected to TV.

Also tried with the new image you posted today - still no telnet. PVRDecoder's FTP connets but no telnet connection.

Anything else I can do or just it does not work on this model?

Posted: **Sun Jun 21, 2015 5:43 pm**

acadoni wrote: Anything else I can do or just it does not work on this model?

Yeah for instance you could post sam.log and samygo.log from /mnt/

Posted: **Sun Jun 21, 2015 10:00 pm**

sectroyer wrote:Yeah for instance you could post sam.log and samygo.log from /mnt/

Unfortunately /mnt is just empty with no file present...

SamyGO

[Ended][ROOT] H "Skype" root (FW<=Dec.2014, all T-GFS)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)

Re: [!!!] Rooting H series (updated 29/03/2015)