Re: [App] libPIPonTV E/F
Posted: Sun Mar 17, 2019 1:16 pm
Nope.
Page 10 of 10
Re: [App] libPIPonTV E/F
Posted: Sun Mar 17, 2019 4:39 pm
Thanks for the quick response! Too bad, would have been cool.
Re: [App] libPIPonTV E/F
Posted: Sun Dec 08, 2019 10:44 pm
I just noticed it's possible to get the HDMI input inside the PIP of the web browser on H-series. At least something 
Re: [App] libPIPonTV E/F
Posted: Mon Dec 09, 2019 12:13 am
Web browser is not a source, therefore it's not PIP but just resize of main
Re: [App] libPIPonTV E/F
Posted: Mon Dec 09, 2019 7:37 pm
Ah I see That must be the same trick used on the smarthub screen. I still hope there could be a way to get at least one of the inputs in PIP sometime (if not HDMI)!
That must be the same trick used on the smarthub screen. I still hope there could be a way to get at least one of the inputs in PIP sometime (if not HDMI)!Re: [App] libPIPonTV E/F
Posted: Sat Oct 10, 2020 7:29 am
any way to fully fix the greenish blurry image on hdmi input(hdmi4 renamed to PC)?
if my PC goes into screen saver when it comes back the image is blurry and has a greenish tint. turning off/on will temporarily fix it.
if my PC goes into screen saver when it comes back the image is blurry and has a greenish tint. turning off/on will temporarily fix it.
Re: [App] libPIPonTV E/F
Posted: Sat Oct 10, 2020 9:51 am
Never heard, but I guess PIP of no signal is -understandably- not expected and cause some loss of sync. I doubt any solution. You still can use blank screen instead of screen off as screensaver, to keep signal alive.
Re: [App] libPIPonTV E/F
Posted: Sat Oct 10, 2020 10:42 am
It's not happening when I use PIP, just if lib is loaded is enough. I added moresize wich is noted to cause issues on some tvs. will try witouth it and get back.
Re: [App] libPIPonTV E/F
Posted: Fri Apr 09, 2021 5:02 pm
Hi, I am trying to use this lib to get more PIP sizes, but I am not able to see the menu to do so (With TV as the primary input and pressing "Tools" on the pilot/remote) and only displays an option for PIP to be on or off...
My TV is a UE75F6400, and after looking at the HideSource log:
The command I am running is:
With a log of:
I am wondering if I am doing anything wrong.
Also of note, is the pilot/remote I am using doesnt have a 3D button, so might have to find a way to map the sound selection to a different button in future, but I can switch to the correct source fine using the FF and RW buttons.
Edit: I have found that I can change the location of the PIP position using "Menu -> Picture -> PIP (enter)" but the extra MORESize options dont exist, and the sound selection is greyed out. I am still hoping for proper split screen...
My TV is a UE75F6400, and after looking at the HideSource log:
Code: Select all
[HideSource] HDMI1: 57
[HideSource] HDMI2: 58
[HideSource] HDMI3: 59
[HideSource] HDMI4/DVI: 60
Code: Select all
samyGOso -d -T -B -r -l /mnt/opt/privateer/usr/libso/libPIPonTV.so SOURCE:57,58,59,60 MORESIZE
Code: Select all
[PIPonTV] SamyGO E/F libPIPonTV v0.1.9 - (c) zoelechat 2016
[PIPonTV] dlsym 'g_pAppWindow' failed.
[PIPonTV] dlsym 'g_pAppWindowPIP' failed.
[PIPonTV] dlsym 'g_pAppTV' failed.
[PIPonTV] _ZN5TCAPI5GetTvEv [0xab4994].
[PIPonTV] dlsym '_ZN8TCWindow9SetSourceEii' failed.
[PIPonTV] dlsym '_ZN8TCWindow9GetSourceEPii' failed.
[PIPonTV] _ZN5TCAPI9GetWindowEN8TCWindow7EWindowE [0xab49b4].
[PIPonTV] _ZN12TCWindowImpl9SetSourceEii [0xbcc648].
[PIPonTV] _ZN12TCWindowImpl9GetSourceEPii [0xbc7338].
[PIPonTV] _ZN6PCTime4TickEv [0xa91fb0].
[PIPonTV] dlsym '_ZN4TCTv6SetPIPEii' failed.
[PIPonTV] _ZN8TCTvImpl6SetPIPEiiN4TCTv10EPipZOrderE [0xbc1274].
[PIPonTV] dlsym 'g_pTaskManager' failed.
[PIPonTV] dlsym '_ZN12CTaskManager14GetApplicationE15DTV_APPLICATION' failed.
[PIPonTV] dlsym '_ZN10CViewerApp16GetViewerManagerEv' failed.
[PIPonTV] dlsym '_ZN14CViewerManager7ShowPIPEi' failed.
[PIPonTV] dlsym '_ZN14CViewerManager7ShowPIPEb' failed.
[PIPonTV] dlsym 'g_pAppSpeaker' failed.
[PIPonTV] dlsym '_ZN9TCSpeaker9SetWindowEii' failed.
[PIPonTV] dlsym '_ZN9TCSpeaker9GetWindowEPii' failed.
[PIPonTV] _ZN5TCAPI10GetSpeakerEN9TCSpeaker8ESpeakerE [0xab4984].
[PIPonTV] _ZN13TCSpeakerImpl9SetWindowEii [0xbaf32c].
[PIPonTV] _ZN13TCSpeakerImpl9GetWindowEPii [0xbaf780].
[PIPonTV] _ZN16TCPIPSizeChecker5t_GetEPii [0x1478578].
[PIPonTV] _ZTV16TCPIPSizeChecker [0x1ed1860].
[PIPonTV] _ZN11SizeControl19CheckPIPSizeSupportEN9TPCWindow9ERectSizeE [0x95c10c].
[PIPonTV] lib_init, >>>
[PIPonTV] Enabling PIP in TV mode for source: 57
[PIPonTV] Enabling PIP in TV mode for source: 58
[PIPonTV] Enabling PIP in TV mode for source: 59
[PIPonTV] Enabling PIP in TV mode for source: 60
[PIPonTV] dlsym '_ZN4TCTv16m_GetPIPOnSourceEv' failed.
[PIPonTV] _ZN8TCTvImpl16m_GetPIPOnSourceEv [0xbb4a9c].
[PIPonTV] dlsym '_ZN4TCTv6SetPIPEii' failed.
[PIPonTV] _ZN8TCTvImpl6SetPIPEiiN4TCTv10EPipZOrderE [0xbc1274].
[PIPonTV] _ZN12KeyInputBase17t_ProcessKeyValueEPh [0x9afc08].
[PIPonTV] _ZN10SsInfoBase11GetSourceIdEN9TPCWindow7EWindowE [0x90c328].
[PIPonTV] _ZN8SsTvBase18CheckWindowConnectEN9TPCSource7ESourceEN9TPCWindow7EWindowEPjPKS1_ [0x9007cc].
[PIPonTV] _ZN20TCHALInfoCheckerBase5CheckEi [0xcccfdc].
[PIPonTV] _ZN20TCHALInfoCheckerBase3GetEPii [0xccd0f0].
[PIPonTV] dlsym '_ZNK26CPipAntennaSublistDataItem15AddMenuItemFlagEv' failed.
[PIPonTV] Init done...
[PIPonTV] Already injected resident, exiting...Also of note, is the pilot/remote I am using doesnt have a 3D button, so might have to find a way to map the sound selection to a different button in future, but I can switch to the correct source fine using the FF and RW buttons.
Edit: I have found that I can change the location of the PIP position using "Menu -> Picture -> PIP (enter)" but the extra MORESize options dont exist, and the sound selection is greyed out. I am still hoping for proper split screen...