Page 97 of 113
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 6:54 pm
by blendstylez
i will do my best, thats for shure..but if i burn my psu thrn i would have a problem..i cant move my 55" tv with my own car..i would have to ask some friends to help me twice..i would like to avoid that if possible..
what can sectroyer maybe do about this problem?
i allready wrote him, and until he writes back i will try that 30-100 area wish me luck guys
arg thats really a pain in the ass guys
everytime the TV crashes i can hear the aliens talking via the TV speakers
very weird sounds, really!
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 8:38 pm
by blendstylez
Code: Select all
Connecting to 192.168.1.14:21 .. Success
Querying recordings on TV ...
Debug Code: 0x00011001 ---> No content on "sda1"
Verifying telnet access to 192.168.1.14:23 .. Success
All recordings on USB listed. Waiting for user.
Connecting to 192.168.1.14:21 .. Success
Querying recordings on TV ...
Debug Code: 0x00011001 ---> No content on "sda1"
Debug Code: 0x00011001 ---> No content on "sdc"
Verifying telnet access to 192.168.1.14:23 .. Success
All recordings on USB listed. Waiting for user.
Connecting to 192.168.1.14:21 .. Success
Querying recordings on TV ...
Debug Code: 0x00011001 ---> No content on "sda1"
Debug Code: 0x00011001 ---> No content on "sdc"
Verifying telnet access to 192.168.1.14:23 .. Success
All recordings on USB listed. Waiting for user.
Connecting to 192.168.1.14:21 .. Success
Querying recordings on TV ...
Debug Code: 0x00011001 ---> No content on "sda1"
Debug Code: 0x00011001 ---> No content on "sdc"
Verifying telnet access to 192.168.1.14:23 .. Success
All recordings on USB listed. Waiting for user.
Examining DRM-ststus of the recording ..
Recording is "forced" into DRM protected mode.
Uploading decoder library to TV
Removing any old work log
Debug Code: 0x00011015
Starting the decoding process on TV
Debug Code: 0x00010A38
Debug Code: 0x00013639
There was an error performing Telnet command .. Cannot continue.
Process FAILED somewhere down the road for 20151118191608.srf.
Debug Code: 0x00010E09
No recordings found. Waiting for user.
Debug Code: 0x00010A91
GetUSBInfo "Client lost connection"
Debug Code: 0x00010B92
Failed to disconnect from FTP..
Connecting to 192.168.1.14:21 .. (1/100)
GetUSBInfo FAILED to Reconnect ..
Debug Code: 0x00010A92
Operation finished .. Waiting for user..
Lordbyte this is a different log isn't it?
does this:
Starting the decoding process on TV
Debug Code: 0x00010A38
Debug Code: 0x00013639
There was an error performing Telnet command .. Cannot continue.
give u a clue what is going on?
i just read through 30 pages of this thread, and i would be happy if just one recording did successfully transfered to my pc
magic value 1 or 10 does not make any difference..as well as about ~70 other values i tried
i ve tried so much toggles, different magic values...everytime i have to power cycle my H6600
i am losing my faith
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 9:14 pm
by Lordbyte
Debug Code: 0x00010A38 ---> The PVRDecoder FTP client have failed to retrieve current folder from TV (You have been disconnected).
If plugin crashed TV this is to be expected.
Debug Code: 0x00013639 ---> The PVRDecoder recieve no responce when issuing a Telnet-command (You have been disconnected).
If plugin crashed TV this is to be expected.
You seem to be very unlucky. As I understand it basically everybody DOES get it running ..
We might persue another angle. The protocol used to "extort" stream-information from the TV involves a race-condition.
Some H-models simply perform too bad to avoid a buffer-underrrun, and on those models you need to "serialize" the operation,
again in SETTINGS --> OTHER
Sorry for your bad experience. You are the only user that I (currently) know of, that has problems of this magnitude.
BR
LordByte
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 9:25 pm
by blendstylez
if you mean the serialization, i allready tried this toggle..result was the same..
and as a side info, same network - same computer - another tv - H6500 works just fine..
why did my tv do 50 tests late at night without crashing one time..and today it crashes every freaking time? what do i overlook??
can u tell me how all other toggles should be set beside the magic value?
maybe one wrong set toggle is the cause
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 9:39 pm
by Lordbyte
Two different days, two diferent memory-maps in TV .. Apps you may have loaded, functions you may have used,
network fidelity, and the current distance between the earth and the moon .. All part of the equation.
I will repeat though, it seems that others DO find their value, and from that point on things run smooth.
But it seems that your "window" af "good" values are both narrow, and not within "normal" range ..
Its not exactly a well defiened science yet
Re-root TV and verify "clean" FTP and Telnet ... and try try again
Sorry man
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 9:46 pm
by blendstylez
even if its a lil offtopic, how do i reroot or better dismiss the root to start from scratch?
and once more thx for your advice!!
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 9:56 pm
by sectroyer
blendstylez wrote:
what can sectroyer maybe do about this problem?
i allready wrote him, and until he writes back i will try that 30-100 area wish me luck guys
I already replied. if you have problems try value of 1
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 10:17 pm
by blendstylez
i did as i told u as well!
result stays the same!
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 10:23 pm
by sectroyer
blendstylez wrote:i did as i told u as well!
result stays the same!
If it doesn't work with ANY value from 1 till 10. I don't think it will work at all
Are you trying on same file or on different files ?
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sun Nov 22, 2015 10:40 pm
by blendstylez
i switched between two files but most of the time with the same one
but im not sure if my rooting procedure was very clean because i did a downgrade from a hanging firmware to a stable firmware, and hadn't to root again..did left a unsure feeling on my side..thats the only thing i can imagine what could be the cause..im clueless :/