SamyGO

Actually, - I have made a bunch of minor fixes for a slew of minor issues.

Not released, its my personal best maintained beta .. You are welcome to test it.
http://www.filedropper.com/samygopvrdecoder18464

With a bit of luck "something" might change

At least you get a better magic-value-editor

nice, thx i will give it a shot..but tomorrow..now my tv is busy ^^

same result :/ i will try to do all from scratch..that means if anybody tells me how to do so
i started a support thread and as soon as someone replies there, i can go on..
i will report back here when im ready again

If I can help with my experience - when I tried this app, it began with retrieving of the files, but most of the times it ended before the end of the file because of the buffer underrun. For example when I tried to decode 8 GB file, sometimes it ends on 3,7 GB, then 5,6 GB, then 800 MB... With the different magic number (40 works better for me), it ends on the end of the file most of the times and not earlier.
But when I see your logs, the retrieving of the files never even started.. I don't think that some magic number could help you.

great post HighOwner...thank you!
This is what i think as well! so i will try to do everything again from scratch, and hope this time it runs different..
the problem can only be on the TV side, because with my second TV a H6500 had absolutly no problem at all! PVR decoder runs without any Problems at default settings...and when i rethink how the rooting on this H6600 ran, with the newest firmware 1290.2, rooted successfully, but the remote didn't response, and i had to power cycle the TV 5 times..after the 5th time, i could use putty to inject a library, so that i can downgrade to 1230, and there i am now

I would try with small 5 minute test file

sectroyer wrote:I would try with small 5 minute test file

great idea! i will do so!

Hi all,

I'm happy to root my Samsung Smart TV H6200 today
I can acces via FTP on port 21 to my TV, but when i want to use this tool "samyGOPVRDecoder"... not connexion possible !

"Connecting to 192.168.1.15:21 .. (5/100)" ... but nothing ^^
I have just a message code : Read Time Out
And the tool crash.

I clic of Abort bouton

logfile :

Connecting to 192.168.1.15:21 .. (5/100)
Last action aborted ...
Querying recordings on TV ...
Connecting to 192.168.1.15:21 .. Success
Querying recordings on TV ...
Verifying telnet access to 192.168.1.15:3023 .. (50/50)
There is a problem with telnet access to the TV. Please investigate port.

I have open the UDP & TCP port on 3023, 3123 & 21 for my Tv in my router
I have open the rules for "samyGOPVRDecoder.exe" in my firewal

I dont understand why i can't open the list of my record with this tool

Please, anyone can help me

Thankx

TV : UE40H6200
Firmware : T-MST14DEUC-2781.0

Use port 23 for Telnet, not 3x23

Ok, thanks man... response very fast lol
But not resolve my issue...

22:08:18: Connecting to 192.168.1.15:21 .. FAILED
22:08:18: Unable to connect FTP-server in TV. Please check setup.

Of course, i can connect with flashfxp lol

[22:07:23] [L] Connexion ? TV Samsung -> IP=192.168.1.15 PORT=21
[22:07:24] [L] Connect? ? TV Samsung
[22:07:24] [L] 220 Operation successful

..
..

[22:07:24] [L] 227 PASV ok (192,168,1,15,213,96)
[22:07:24] [L] Ouverture d'une connexion de donn?es IP : 192.168.1.15 PORT : 54624
[22:07:24] [L] LIST -al
[22:07:24] [L] 150 Directory listing
[22:07:24] [L] 226 Operation successful
[22:07:24] [L] Liste termin?e: 3 KB dans 0,03 seconde (3,0 KB/s)

When i'm using this tool, it's very slow ... and lag ! Normal ??

Lot of times, the program freez and i have the message : Not Reponse

:s

As already explained above, you might have to find the "magical value"

Lordbyte wrote:The magic value can be found as a slide-bar in SETTINGS -> OTHER

Start with the value 10, and increase by 2 or 3 for each test .. or select any random buffersize .. results are random anyway.
(Until you finally find it .. then things seem to run smoothly "forever")