SamyGO

Good eve,

Would anybody know the location of the EEPROM to reset with jumper wire on

Samsung Main Board for LE32B450C4WXXU Samsung TV ?

I don't want to reset the wrong EEPROM trying to resolve a firmware upgrade issue...

Thank you in advance for your help !

Hi.

What exact issue are you talking about?

Hi ive upgraded the firmware and it will not start now black screen so ia'm going to reset the eeprom but i do not know which is the right eeprom

I do not think eeprom reset will solve your issue. Usually we recommend mainboard replacement as solution.

But worth to try if you feel better.

is it possible to get a image of the board with the right eeprom to jump

Problem is not eeprom. Problem is firmware upgrade procedure failure. Perhaps nand chip is damaged or not properly configured. Until now we do not know how to unbrick such damages at home.

If you have exlink cable you could try investigate boot log. Maybe you get some useful information.

ok i have not got a exlink cable have a look at this link viewtopic.php?f=4&t=9687 what do you think?

also the upgrade did not work it got to 46% then jst hung

If you had access via exlink...

i have not got access by exlink but if you could point me to the right eeprom i could give that a go