Page 1 of 1

Problem with samba shares

Posted: Mon May 18, 2020 9:07 pm
by brunogts77
Hi, can anyone Help me with samba shares? I have edit 04_04_samba.init and TV can mount the shares well. The problem is that when I start playing a video, the TV freezes. Can anyone help me?

Re: Problem with samba shares

Posted: Wed May 20, 2020 11:07 pm
by brunogts77
Any Help?πŸ€”πŸ€”

Re: Problem with samba shares

Posted: Sun Jun 14, 2020 6:53 pm
by kuentin
Hello,
I had a similar issue, noway to solve it.
My advice: set a nfs server, instead of the samba server, and mount it on the tv with the only mount option -nolock. It works flawlessly
Best regards

Re: Problem with samba shares

Posted: Sun Jul 05, 2020 1:02 pm
by brunogts77
Hi, can you post your NFS script?? Thanks

Re: Problem with samba shares

Posted: Sun Jul 05, 2020 11:35 pm
by brunogts77
Este e o meu script:
SpoilerShow
. #!/mnt/bin/busybox sh
#
# Β© Copyright 1996-2010, ZsoltTech.Com
# by Ser Lev Arris <arris@ZsoltTech.Com>
#
# donated for the SamyGo Project
# http://samygo.sourceforge.net/
#
# Version: SamyGO svn $Id: 03_03_nfsmount.init 1069 2011-01-03 16:47:24Z arris69 $ mount mod by solevi (levi on SamyGO)

. /dtv/SGO.env
# sleep 9
##### YOU CAN CHANGE ME HERE ######
SERVER="192.168.1.251"
# SERVER="10.0.0.1" # if you want a fixed server
#SHARES=""
# SHARES="Video Music Photo" # if you won't all your shares, but then set SERVER too!!
##### CHANGE ME END ######

FR_NAME="NFS Server"
# M_OPTS="uid=1010,gid=1010,soft,udp,async,nolock,rsize=32768,wsize=8192"
# M_OPTS="rw,uid=1010,gid=1010,soft,udp,nolock,rsize=32768,wsize=32768"
# M_OPTS="uid=1010,gid=1010,soft,tcp,nolock,rsize=32768,wsize=32768"
# M_OPTS="uid=1010,gid=1010,soft,tcp,nolock,rsize=8192,wsize=8192"
M_OPTS="uid=1010,gid=1010,soft,tcp,nolock"

SERVERS="Don't set me!!"

DEST_DIR=$MOUNT_PATH/nfs

do_mount()
{
# $(echo -e "[sdg]\nVendor : NfsMount\nProduct : $FR_NAME\n\
#Serial : Q80VQLFG\nDevpath : 7\nLun : 0\nMountDir : $DEST_DIR\nFileSystem : vfat\n" >> /dtv/usb/log)

for i in $S_MOUNTS ; do
#M_POINT="$DEST_DIR/$1/$(echo -n $i | sed -e "s/\//_/g")" #disabled by levi
M_POINT="$DEST_DIR/$1/$(basename $i)" #enabled by levi
mkdir -p "$M_POINT"
if [ `cat /proc/mounts | grep -c "$M_POINT"` -lt "1" ] ; then
$SYSROOT/bin/busybox mount -o "$M_OPTS" "$1:$i" "$M_POINT"
else
echo "$M_POINT is mounted!"
fi
done
}

get_shares()
{
if [ -z "$SHARES" ] ; then
echo -n "Search Shares on: "
for i in $SERVERS ; do
echo $i
# S_MOUNTS=$(showmount --no-headers -e $i | cut -d " " -f1)
S_MOUNTS=$(showmount --no-headers -e $i | sed 's/^\(.*\) .*/\1/')
[ -n "$S_MOUNTS" ] && do_mount $i
done
else
echo -n "Fixed Server: "
for i in $SERVERS ; do
echo $i
S_MOUNTS=$SHARES
[ -n "$S_MOUNTS" ] && do_mount $i
done
fi
}

get_servers()
{
if [ -z "$SERVER" ] ; then
# SERVERS=$(cat /proc/net/arp | grep -v "IP address" | cut -d " " -f1)
SERVERS=$(cat /proc/net/arp | grep -v "IP address" | sed 's/^\(\w*.\w*.\w*.\w*\) *.*/\1/')
else
SERVERS=$SERVER
fi
}

case $1 in
start)
echo " " >> $LOGFILE 2>&1
echo "+++++++++++++++++ NFS ++++++++++++++++" >> $LOGFILE 2>&1
echo " " >> $LOGFILE 2>&1

# for systems with modular nfs kernel support
insmod /mtd_exe/vdlm/sunrpc.ko || insmod $MOD_DIR/kernel/net/sunrpc/sunrpc.ko || dmesg | tail >> $LOGFILE 2>&1
# insmod /mtd_exe/vdlm/auth_rpcgss.ko || echo "auth_rpcgss.ko. T-GFS model or wrong/missing modules?"
insmod /mtd_exe/vdlm/lockd.ko || insmod $MOD_DIR/kernel/fs/lockd/lockd.ko || dmesg | tail >> $LOGFILE 2>&1
#insmod $MOD_DIR/kernel/fs/nfs_common/nfs_acl.ko #actually server part is not needed for TV
insmod /mtd_exe/vdlm/nfs.ko || insmod $MOD_DIR/kernel/fs/nfs/nfs.ko || dmesg | tail >> $LOGFILE 2>&1
insmod /mtd_exe/vdlm/nfsv3.ko || insmod $MOD_DIR/kernel/fs/nfs/nfsv3.ko || dmesg | tail >> $LOGFILE 2>&1
sleep 3
get_servers
get_shares
;;
stop)
# may can fail if device access the mount from content library
# for i in $(cat /proc/mounts | grep nfs | cut -d " " -f2) ; do
for i in $(cat /proc/mounts | grep "$DEST_DIR" | sed 's/^\(.*\) \(.*\) nfs .*/\2/') ; do
$SYSROOT/bin/busybox umount $i
done
;;
status)
$SYSROOT/bin/busybox mount | grep "$DEST_DIR"
;;
*)
echo "Usage: $0 {start|stop|status}" 1>&2
exit 0
;;
esac

Re: Problem with samba shares

Posted: Mon Jul 06, 2020 12:20 am
by kuentin
Hello,
The nfs script I use it's the one that samygo provides: 03_03_nfsmount.init
You have to edit it with your server values.
Set the server: the ip of your nas.
Set the shares: if you only want to mount an especific directory from the nfs server OR if in your nfs server are more than 1000 files or so, don't know exactly the figure(that's because it won't mount if there are too many files in the server, so you could mount only a directory to test it)
And last, and least for me it's the only way to mount, comment out all the #M_OPTS and add this one:
M_OPTS="nolock"
The rest of the script should be fine.

Re: Problem with samba shares

Posted: Wed Jul 08, 2020 9:45 pm
by brunogts77
Hi, it works 😁😁😁. Now i can streaming all my vΓ­deos on my Nas.πŸ’ͺπŸ’ͺ. Very thanks πŸ‘πŸ’ͺ