[App] Samygo Dump Maker
Posted: Sat Jan 29, 2011 7:09 pm
Samygo DumpMaker lite v0.2.5 updated on 19/08/2011
Download here
Samygo DumpMaker is a samygo extension for B series samsung TV (CI and CI+) to make dumps of system partitions to USB.
SUPPORTED TV MODELS:
All TV models with ContentLibrary. CI and CI+
MAKE BEFORE START
First you need enable (if not already) copy/remove feature in Content Library Manager,
enable debug and dissable Watchdog:
INSTALLATION
- unpack and copy "Samygo-dm" dir to USB drive (fat32) and attach it to TV.
/samygo-dm directory must be on root of USB with file structure on it:
- Power on TV
- Enter [Content Library Manager] -> Select [USB] -> [Children]
- Use Copy function (yellow RC button) on TV to copy "SamygoHorse2" to TV internal flash.
(After pressing yellow button, choose "copy all").
USAGE
- Attach empty fat32 USB (min 2Gb) to TV, do not unplug it until TV reboot (can take up to few hours, but usualy procedure takes about 20 min).
- Go to [Content Library Manager] -> [My Contents] -> [Children]
- You can run it from: [Menu] -> [Source list] -> [USB] -> [Content Library] -> [My Contents] -> [Children]
- Run DumpMaker
- TV stops to respond to RC, it is normal. Procedure info is visible on TV screen. Do not power off TV!
- Wait until you see ContentLibrary back.
- You find log files on USB, do not delete it.
- On root of USB you find dumps. Keep safe, might you need it later
-Sometimes it is required up to 3hours to get full dump. Be patient. But average time is les than 20 min (depends from TV model and USB speed)
Download here
Samygo DumpMaker is a samygo extension for B series samsung TV (CI and CI+) to make dumps of system partitions to USB.
SUPPORTED TV MODELS:
All TV models with ContentLibrary. CI and CI+
MAKE BEFORE START
First you need enable (if not already) copy/remove feature in Content Library Manager,
enable debug and dissable Watchdog:
- TV is off
- Enter Service Menu ( quickly push
[MENU] [MUTE] [POWER] on your remote control )
on USA models: [MUTE] [1] [8] [2] [POWER]
[*]Change setting (Control -> Sub Option -> Wiselink Write -> On<-off)
[*]Change setting (Control -> Sub Option -> Watchdog -> Off<-on)
[*]Change setting (Control -> Sub Option -> rs232-jack -> debug<-UART<-Logic)
[*]Power off TV [POWER]
[*]Remove all USB drives/keys attached to TV
INSTALLATION
- unpack and copy "Samygo-dm" dir to USB drive (fat32) and attach it to TV.
/samygo-dm directory must be on root of USB with file structure on it:
Code: Select all
/samygo-dm/
------clmeta.dat
----------/DumpMaker/
----------------clmeta.dat
----------------README
----------------dumpmaker.png
----------------dm.sh
----------------loader.so
----------------shadow.ttf- Enter [Content Library Manager] -> Select [USB] -> [Children]
- Use Copy function (yellow RC button) on TV to copy "SamygoHorse2" to TV internal flash.
(After pressing yellow button, choose "copy all").
USAGE
- Attach empty fat32 USB (min 2Gb) to TV, do not unplug it until TV reboot (can take up to few hours, but usualy procedure takes about 20 min).
- Go to [Content Library Manager] -> [My Contents] -> [Children]
- You can run it from: [Menu] -> [Source list] -> [USB] -> [Content Library] -> [My Contents] -> [Children]
- Run DumpMaker
- TV stops to respond to RC, it is normal. Procedure info is visible on TV screen. Do not power off TV!
- Wait until you see ContentLibrary back.
- You find log files on USB, do not delete it.
- On root of USB you find dumps. Keep safe, might you need it later
-Sometimes it is required up to 3hours to get full dump. Be patient. But average time is les than 20 min (depends from TV model and USB speed)
Code: Select all
CHANGELOG:
v0.2.5
added dump of partitions bml0/10 and bml0/11 (temporary no progress indications on TV screen, just wait until app finishes.)
v0.2
- OSD graphics added
- Lite version - only bml0/1 - bml0/9 partitions dumping
v.0.1
- First version, tested on LE40B653T5W
