Re: Bricked LE32579
Posted: Sat Mar 05, 2011 6:50 am
hi,
i have bad news for you. For strange reasons we have had three TV bricks on russan forum until today. All bricks were after execution reboot command in console. One brick was because of channel editor over web ui. We didn`t have any help, ExLink cable didn`t solve this problem. And why reboot kills TV we do not know yet. I`m sorry
So to do not waste your time i would recommend you bring it to Service.
I add warning to do not use reboot function, it is to remove in next version of hack (it is coming...)
On many tested TVs everything works perfect, but on some - especially C5000QW (TDT), two TV C550 (TDT and MSX) - not.
Log we saw on those bricked:
i have bad news for you. For strange reasons we have had three TV bricks on russan forum until today. All bricks were after execution reboot command in console. One brick was because of channel editor over web ui. We didn`t have any help, ExLink cable didn`t solve this problem. And why reboot kills TV we do not know yet. I`m sorry
So to do not waste your time i would recommend you bring it to Service.
I add warning to do not use reboot function, it is to remove in next version of hack (it is coming...)
On many tested TVs everything works perfect, but on some - especially C5000QW (TDT), two TV C550 (TDT and MSX) - not.
Log we saw on those bricked:
Code: Select all
Samsung Bootloader Infomation
release ver : 1004 Release
etc :
=================================
UART2 is used to debug mode(0)
load kernel start, size : 131072 + 2883584 byte
load_cmac()[918 line]: entry->first_blk = 1, entry->no_blks= 1
1024 bit RSA Sign/Verify Test Success.
authentication success
XIP Kernel Image ...
Starting kernel ...
[SELP] preset_lpj manual setting 175616
================================================================================
SAMSUNG Mstar Kernel
Version : 1004.84(RELEASE)
================================================================================
init started: SELP-BusyBox v1.6.0-VD Linux SELP.4.2.1.x (2010-03-25 09:52:34 KST) multi-call binary
starting pid 21, tty '': '/etc/rc.sysinit'
/etc/rc.local start!!!!
##################################
VDLinux 1.1.1.x Mstar RootFS ver
1004
Used kernel ver(module is builed)
1007.88(RELEASE)
##################################
starting pid 32, tty '': '/bin/cttyhack'
/etc/profile start!!
/mtd_rwarea/PartitionSwitch_1_0 is detected...
2nd Partition is selected...
_mod_sys_init.176 ioctl
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
insmod: cannot insert '/mtd_exe/samsung_mstar.ko': File exists (-1): File exists
******************************************************
Application running is failed..
SW image is stopped..
******************************************************
SELP#> 