Page 1 of 7
Samsung BD-D6900 (rooted, Serial port:ok,TDM:ok)
Posted: Sun May 01, 2011 10:03 pm
by geo650
Based on descriptions of accessing BD-
C6900 (
http://forum.samygo.tv/viewtopic.php?f=18&t=1688) I was trying to get into new BD-Player -
Samsung BD-D6900. Unfortunately, without success.
I have no idea what CPU and OS is hidden inside D6900. I don't know if enabling telnet for this device is possible. Just wanted to try.
What worked?
- setting develop account in SmartHub (new name for Internet@TV)
- downloading and installing hacked widget from private webserver
- executing hacked widget
What went wrong?
- please see attached picture:
BD player was unable to see ext3 pendrive. Also, ext2 partition wasn't read. I tried FAT and XFS filesystems, but finished with this error message above.
That's everything for now.
BTW, firmware used in this model is called
B-FIRURDEUC.
My next idea is to edit
news.js file of that modified widget to check if it can see device's filesystem at all. Anybody knows how to list directory or files using pluginObjectFile (or other object) ? Maybe it will be possible to list root directory?
Re: Samsung BD-D6900 (not rooted yet)
Posted: Fri May 06, 2011 6:27 pm
by mirsev
D6900 could be very different from C6900. May be it is like D series of TVs. Check their forum here and ask about your problem. May be someone will help you.
Regards.
Re: Samsung BD-D6900 (not rooted yet)
Posted: Mon May 23, 2011 11:29 pm
by geo650
In fact, D6900 is a bit different. It has no ex-link (or rather, I don't know where it is). I made some photos of internals (top PCB layer) and found some chips (Samsung SA57970A13 / *NOT* ARM CPU?, Realtek ethernet controller, EEPROM chip - 24512RP, a few smaler ICs, empty pads...)
I read C- and D-series TV models' forums but cannot find a solution how to see D6900's guts.
Re: Samsung BD-D6900 (not rooted yet)
Posted: Tue May 24, 2011 7:43 am
by geo650
krandobas wrote:Samsung SA57970A13 is not ARM CPU. ARM should be under the grey heatsink.
Most likely, you are right. I've been suggested by "ARM" letters printed on that IC. I couldn't find anything on Google.
Only this page contains that chip:
http://soc.dongguk.ac.kr/alumni.htm
so I think it is something for blu-ray control.
I don't know what is under that heatsink (probably specialized/or regular CPU) - and there is a flash memory chip also visible but it is not contacted with heatsink's surface.
Re: Samsung BD-D6900 (not rooted yet)
Posted: Thu Jun 16, 2011 7:05 am
by julianbb
PORT FOUND AND TESTED
Code: Select all
[t9wrapper::SetLanguage(1299)]pLanguage is [69]
Singletone emp is running. name:[TV] Emp:[44799] , Client:[52501] , Option:[SINGLETON] , Status:[2][AP_INFOLINK/Fatal] 967 : Setting m_SafeAlarm->Reset(TIME_OUT_STOP, 0);
[AP_INFOLINK/Fatal] 968 : Wait Mode --> Safe Mode
[AP_INFOLINK/Fatal] 969 : ### MESSAGE_WEBSVC_ACTIVATE_READY_WM ###, m_bFirstStart [1]
[AP_INFOLINK/Fatal] 970 : m_CountryCode [RO]
[AP_INFOLINK/Fatal] 971 : Update is False
[AP_INFOLINK/Fatal] 972 : *****************************************************
[AP_INFOLINK/Fatal] 973 : **** Infomation for connecting with hub-site ****
[AP_INFOLINK/Fatal] 974 : *****************************************************
[AP_INFOLINK/Fatal] 975 : Server Type : Operating
[AP_INFOLINK/Fatal] 976 : TVID : RLXXXXXXXXXXS
[AP_INFOLINK/Fatal] 977 : Mac Address : (MY NETWORK MAC)
[AP_INFOLINK/Fatal] 978 : Firmware : T-INFOLINK2011-1002
[AP_INFOLINK/Fatal] 979 : Country Code : RO
[AP_INFOLINK/Fatal] 980 : Model Code : FIRENZE_BD_DVB
[AP_INFOLINK/Fatal] 981 : *****************************************************
[AP_INFOLINK/Fatal] 982 : Update is False
t_Monitor 204 : No iPod Device connected or disconnected
sd 4:0:0:0: [sda] Assuming drive cache: write through
sd 4:0:0:0: [sda] Assuming drive cache: write through
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[DevMgr_MSC/Fatal] 983 : [Update:320] Total:1 Modified:0 Added:1 Removed:0
IDevice::DEV_MSC = 1, IDevice::DEV_HDD = 4, eType = 1
[DEFAULT/Debugging] 984 : [CUSBApp::t_OnEvent - 304]
[DEFAULT/Debugging] 985 : [CUSBApp::ValidationCheck - 561]
GetAllDevices
[DEFAULT/Debugging] 986 : [CUSBApp::CanDemoPlay - 585]
[DEFAULT/Debugging] 987 : [CUSBApp::CheckAndActivateDemo - 428] false
[/dtv/usb/sda1/SMRTNTKY/WSETTING.WFC]
[ GetPlugAccessInfo FALSE]
[DEFAULT/Debugging] 988 : [CUSBApp::CheckPlugAccess - 451] CheckPlugAccess false
[DEFAULT/Debugging] 989 : [CUSBApp::ValidationCheck - 561]
[DEFAULT/Debugging] 990 : [CUSBApp::OnPartitonAddedEvent - 647]
[DEFAULT/Debugging] 991 : [CUSBApp::OnPartitonAddedEvent - 659]
## CloseAllPopups [CallThread=0x7b384460] from(46), alignment(0) ##
[DEFAULT/Debugging] 992 : [CUSBApp::OnPartitonAddedEvent - 688]
## RunApp [CallThread=0x7b384460] App (46) runs App(USB App:46), nRunData(0x39), nRunOption(0x0) ##
[AP_NET_SETUP/Fatal] 993 : [virtual bool CNetworkAppBase::t_OnEvent(const PTEvent*)][line:998] szDevicePath[/dtv/usb/sda1]
[/dtv/usb/sda1/SMRTNTKY/WSETTING.WFC]
[ GetPlugAccessInfo FALSE]
[AP_NET_SETUP/Fatal] 994 : [virtual bool CNetworkAppBase::t_OnEvent(const PTEvent*)][line:1015] Fail to Run Plug and access
[PVRCore/Fatal] 995 : CPVRCoreAppProc1TunerTV::t_OnPvrDevicePlugIn() LINE [943] -- MESSAGE_PVR_DEVICE_PLUG_IN received.
GetAllDevices
[DEFAULT/Debugging] 996 : [CUSBPopupWnd::t_OnBeginActivating - 863]
[DEFAULT/Debugging] 997 : [CUSBPopupWnd::t_OnEndActivating - 874]
Front Display received MESSAGE_APP_DEACTIVE
[222] Add New Device : 0
[DevMgr/Fatal] 998 : [t_OnEvent:194] DeviceManager::MESSAGE_MSC_CONNECTED : DeviceKEY(5), DeviceID(0)
>>>HERE I ATACHED A VFAT USB STICK==================================================
MSC Device# : 1
Device ID = 0
Device Name = sda
Vendor Name = Kingston
Model Name = DataTraveler 2.0
Serial Number = 8998011620080115142
BUS Info = 1-1
LUN = 0
Partition ID = 0
SCSI Device Path = /dev/sda1
Mount Path = /dtv/usb/sda1
File System Type = VFAT
Total/Free = 995380/993532
==================================================<<<
Re: Samsung BD-D6900 (not rooted yet)
Posted: Thu Jun 16, 2011 7:42 am
by juusso
julianbb wrote:PORT FOUND AND TESTED
Could you take some photos of serial port?
Re: Samsung BD-D6900 (not rooted yet)
Posted: Thu Jun 16, 2011 9:29 am
by julianbb
hi juuso,
"Sorry, the board attachment quota has been reached.".....!!!???!!!
i will try to upload the picture somewhere...
tx is output from bd-d6900
rx is input to bd-d6900
I used a PL2303 usb to serial
Re: Samsung BD-D6900 (not rooted yet)
Posted: Thu Jun 16, 2011 9:41 am
by juusso
Thanx!
I can not see the GND. Is it the pin behind rx and tx?
Which one of those pictures is right:
or
I can upload the photo to sourceforge...
Might it is time to fill-up the
bluray wiki page?
i gave you write permissions.
Edit: Ok, both are right, i understood
Re: Samsung BD-D6900 (not rooted yet)
Posted: Thu Jun 16, 2011 9:53 am
by julianbb
Yes ,the 2 pins above are both gnd
I will make detailed pictures.
what's the next step ?
i will need some help rooting this device...
I'm waiting sugestions...