SamyGO

Hello,

i could really need some help.

TV: LE37B650 CI+
FW: should be 2006, was never higher

after almost 2 years i decided to make some samygo apps autoboot,
so i changed some startup scripts found in the wiki and half bricked my TV.

TV is starting and hangs him self on some point, leaving the Screen black.
I have attached an ex-link log (in zip because txt not allowed).

I tried accessing u-boot but i can`t, tried different combinations with the ~ key (i have german keyboard layout).
Tried it sometimes before, while my TV was intact, and couldn`t enter it either...

I also tried the boot from USB backdoor, doesnt seem to work either, maybe i closed the door by adding the scripts in front of it...

Has someone any idea how to prevent the execution of the startup scripts or getting into the u-boot?

Thanks in advance

Do you have console over ExLink? I mean full console?
And what looked your samygo.sh like? what script exeDSP.sh do you call from there?

i tried to follow this one http://wiki.samygo.tv/index.php5/Autolo ... %28B65x%29
while slightly adapting it to my different config.

Console over exlink?

ex link yes, but i can`t seem to enter any commands, tried ctrl+c also the u-boot shift+~
no reaction

Uboot isn't avilable on ci+
Do you unlock console by entering "debug"?
Can you access Top debug menu?

yes, access to TOP debug is there, but activation of the serial console doesnt help, no inputs allowed exept numbers.
to make matters worse i think, TV wont stop booting till it hangs it self up on random points...

edit
i found this one on wiki http://wiki.samygo.tv/index.php5/How_to ... t_USB_hack, is there an similar funtion for B series?
maybe this would solve my problem by deleting all apps and scripts?

OK. We can unlock filtration of symbols!
I haven't seen the partition formatting menu like on c series.

I'm at work now and don't have much time. Later I contact you.

No problem,
i`ll be happy if we get it working

till later juuso

Try the Langerhans tool. I doubt it works on b650, but might?

http://forum.samygo.tv/viewtopic.php?t=717#p6323

Also try if magic code provided by petergrey could work for you:
http://forum.samygo.tv/viewtopic.php?t=717#p6146

And here is how to enable full console over ExLink:
http://forum.samygo.tv/viewtopic.php?f= ... t=20#p5650