Page 1 of 1
Console code for BD D series
Posted: Tue Nov 15, 2011 6:48 pm
by juusso
We have code for ExLink console unlock + code for TDM.
Any comments welcome.
Re: Console code for BD D series
Posted: Wed Nov 16, 2011 7:58 am
by julianbb
Yap
tested ...working...
Code: Select all
[AP_INFOLINK/Fatal] 257 : Country Code : GB
[AP_INFOLINK/Fatal] 258 : Model Code : FIRENZE_BD_DVB
[AP_INFOLINK/Fatal] 259 : ****************************************************
[AP_INFOLINK/Fatal] 260 : Update is False
20089999
====================================
[ TOP Debug Menu]
------------------------------------
1 : SubSystem Print On/Off
2 : Platform Print Setting
3 : TD Print Setting
4 : Performance Print Setting
5 : Sdal Print Setting
6 : Sdal Trace Setting
10 : Factory Debug
11 : TD Debug
12 : SubSystem DBG
13 : SubSystem Info Print
14 : Optical SubSystem DBG
21 : Louvre Print Setting
------------------------------------
70 : Jade Debug
80 : PVR Debug
====================================
99 : Exit
====================================
DBG> :
Samsung don't have imagination
20102011 ? or maybe they should use a keyboard with more numbers ...maybe a full qwerty one...
Re: Console code for BD D series
Posted: Sat Dec 31, 2011 4:14 am
by nobody
Lol! They can't since they locked the serial port to 0-9 A-F cr and del
Re: Console code for BD D series
Posted: Tue Feb 21, 2012 8:07 am
by julianbb
To input numbers you should dismount your device , find serial port connections on the electronic board ,solder TxD, Rxd and Gnd wires to a serial cable connect them to a Pc and open port via Putty or Telnet...
Thats it
Re: Console code for BD D series
Posted: Sun Sep 02, 2012 11:33 am
by oga83
Additional console codes...
probably useless
Code: Select all
8158282
====================================
[ Key Debug Menu]
====================================
1 : Channel Up/Down Test
2 : Source Change Test
3 : Previous Key Test
4 : Channel Up Test
5 : Air/Cable Change Channel Up Test
6 : Channel Up STC Test
7 : Memory Leak Check
8 : AFT Read Aging Test
9 : Play Key Scenario
====================================
90(or AnyKey) : Test Stop
99 : Exit
====================================
Code: Select all
81588
@@@@@@@@@@@ Key Record Start @@@@@@@@@@@
81599
@@@@@@@@@@@ Key Record Exit @@@@@@@@@@@
Code: Select all
1194444
Check POWER_TYPE_CPU_RESET on barcelona project
Re: Console code for BD D series
Posted: Thu Feb 07, 2013 8:31 pm
by strugler
can you guys explain to me what are thoses codes for ? i have an HT D6750w will those codes work for me ?
Thank you, i am a newb after all
Re: Console code for BD D series
Posted: Fri Feb 08, 2013 1:33 pm
by oga83
There is a serial port on most units
It is possible to connect it to a terminal (putty, hyperterminal, ...)
Then :
- 20102011 is used to enable the keyboard entry
- 2008999 is used to run the Top Debug Menu
Re: Console code for BD D series
Posted: Fri Jan 24, 2014 1:14 pm
by bdublues
Nice work! Glad people are still tinkering with these.
If only this had region options, and was for BD F series :/
Re: Console code for BD D series
Posted: Tue Oct 14, 2014 2:01 am
by r00t00r
is there a chance for these commands to be altered with a fw update