Page 1 of 3
Re: Help!!! C6200 NO picture!!!! need help fast!!!
Posted: Mon Nov 21, 2011 9:43 pm
by nspierbundel
Search for factory reset options, on my blu ray player i need to hold the stop button,
Maybe simmilar for tv
Re: Help!!! C6200 NO picture!!!! need help fast!!!
Posted: Mon Nov 21, 2011 9:52 pm
by juusso
You have to reset eeprom by shortening pins. Take good-res photos of your mainboard.
Inspect your mainboard for some pins (example -
D series unbricked m/b)
Re: Help!!! C6200 NO picture!!!! need help fast!!!
Posted: Mon Nov 21, 2011 10:06 pm
by juusso
You can call Service and get TV repaired under warranty.
Other way is ExLink cable - but only if you have choosen rs-232 to debu before you got crash.
Also you could take spootlight and check your LCD pannel while TV is on (try to get to service menu). Might here is just LCD light switched off. You could see some menus and make factory reset.
Re: Help!!! C6200 NO picture!!!! need help fast!!!
Posted: Mon Nov 21, 2011 10:13 pm
by juusso
upload picture to
www.tinypic.com and post here link (or smth else).
Do you have ExLink?
Have you tried Spootlight?
Re: Help!!! C6200 NO picture!!!! need help fast!!!
Posted: Mon Nov 21, 2011 10:22 pm
by juusso
spootlight = searchlight
Something like this:
Tell me, do you have changed rs232 value in Service menu? If no, then it makes no sense, ExLink doesn`t help. ExLink is cable...
Re: Help!!! C6200 NO picture!!!! need help fast!!!
Posted: Mon Nov 21, 2011 10:33 pm
by nspierbundel
Shorting pins will.most likely void warranty. If done wrong tv is trash. Sell the parts on forum.
check if you have image, maybe backlight is disabled. You can see a verry fainted image. If not return for warranty.
I know for routers shorting a pin can debrick it, or not.
Maybe bad luck and the inverter died. This should be warranty!