SamyGO

First question: D6200 with @D6300 gives me the full D6300 without any disadvantages (besides being locked to old fw, but that's already a given with samygo and newer firmware just disables samygo/changing model). @D6100 would be also possible, but that sometimes breaks 3D and is intended for UK.

So the only differences between D6500 i can see would be that the D6200@6300 is missing:

• 400Hz CMR (just has 200), buth both 100 Hz panel refresh <- anyone know which setting that actually effects, as it still has Motion Plus and LED Motion Plus
• No Wifi integrated <- but some usb wifi adapters(RT2870 and RT357x based ones like Hama 62740 for 20EUR) or all ethernet to wifi adapters(like Netgear WNCE2001for 30EUR) are possible
• No Web Browser <- personally not needed. DPI too low for normal surfing and alternative flash video sites are buggy. for the bigger video sites there are apps
• No Skype <- personally not needed
• No 2D to 3D Conversion <- personally not needed, conversion is rather bad and 3D always sucks at UExxD6xxx
• No additional "Rovi On Screen" EPG(gets its data from the internet; gets all channels at once, no need to switch to them individually like with Samsung's; Adds default delays for PVR)
• No SOAP (for sending text messages to your TV)
• In rare cases UExxD6500 comes with 2x 3D glasses (guessing: Samsung SSG-3100) <- usually even more expensive then
• No TM1060 remote control but TM1050 <- not sure what the difference is? I guess TM1060 has a backlight
• T-GASDEUC-1016.0 vs T-GAS6DEUC-1014.0 <- didn't find a changelog for GAS6DEUC, but the things they have the same should be actually the same?
• 250EUR more for the 46"

Or are there any pictures settings missing in the D6300 that the D6500 has? Panels are the same and so is picture quality if you don't use CMR, i.e. if you don't watch sports?

Back to CMR:
Afaik Samsung calculates the 400Hz CMR like that: 100 Hz panel refresh * 2 (for backlight blinking) * 2 (for interpolation)
But backlight blinking is LED Motion Plus afaik, which would mean that the D6300 doesn't do interpolation?
Is that visible? I just heard that people can easily see the difference between 100 Hz CMR and the rest, which shouldn't be a surprise as that's only 50 Hz panel refresh.