Page 1 of 1

serial

Posted: Mon Mar 12, 2012 3:20 pm
by derewasazx
I ask help from an expert SamyGO,I connect with the serial to (pin 4-X 5-PIN GND, PIN 11 TX)al vga to the tv 55d8000,I read this from the terminal:

Code: Select all

>> P0063_102 onboot(Feb 22 2011-09:01:24)
[SELP] preset_lpj manual setting 1597440

[SDP EINTR] 30 External interrupt is registered 

[SDP EINTR] 31 External interrupt is registered 

[SDP INTR MERGER] 29 interrupt merger is registered 

================================================================================

 SAMSUNG Genoa-P Kernel

 Version : 1013_233S RELEASE

================================================================================


init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 10:51:51 KST)

starting pid 26, tty '/dev/ttyS2': '/etc/rc.local'
/etc/rc.local start!!!!
##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill


starting pid 34, tty '/dev/ttyS2': '-/bin/sh'
/etc/profile start!! 
=====================================================================
  ROOTFS VERSION : "Genoa.P 1021S RELEASE" KERNEL MODULE VERSION : "1013_233S"
=====================================================================
[sdp_mmch_isr] DTO Interrupt not caused!!!!

====================================================================

[SELP] fsr module load!!(1013_233S RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] fsr_stl module load!!(1013_233S RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] rfs_glue module load!!(1013_233S RELEASE preempt mod_unload ARMv7 )

====================================================================

====================================================================

[SELP] rfs_fat module load!!(1013_233S RELEASE preempt mod_unload ARMv7 )

====================================================================

mount mtd_rwarea
2nd partition!!
mount mtd_exe
mount mtd_rocommon
mount mtd_appext
mount mtd_appext 2nd partition!!!
Application is started..
Run FastLogo...                                                          
and still other data,but I can not write to unlock the serial, I helped to please.thanks

Re: serial

Posted: Mon Mar 12, 2012 3:26 pm
by juusso
Check if your tx is on right pin...
23331003
unlocks console
and this:
20089999
is the TDM access code. Take care.

AW: serial

Posted: Tue Mar 13, 2012 8:00 am
by DEUS
Which operating system do you use for the connection UBUNTU? Windows or something else? USB adapter?

Re: serial

Posted: Tue Mar 13, 2012 5:37 pm
by derewasazx
[Menu Debug TOP] unlocked ok thanks so much, now I want to install telnet help me?

Re: serial

Posted: Tue Mar 13, 2012 5:42 pm
by juusso
nope. you can`t install telnet to D series. Neither over cable nor other way... Also no ssh. This is not supported by kernel.

But if you need root access AND your firmware is not restricted (not recent), you can get shell using SamyGO widget.

Re: serial

Posted: Tue Mar 13, 2012 11:27 pm
by derewasazx
and updated firmware with T-GAP8 DEUC 1021.2, what can you do?

Re: serial

Posted: Tue Mar 13, 2012 11:39 pm
by juusso
nothing.

Re: serial

Posted: Sun Mar 18, 2012 12:41 am
by derewasazx
Ciao juuso, c'? un modo per mettere software alternativo? or with the serial [Debug Menu TOP] or in another way,I want to install samygo.thanks