firmware T-MSXMDEUC
Posted: Sun Apr 08, 2012 5:48 pm
- help, brick tv, led on 20 seconds with a black screen with cable Ex-Link says this: codice Samsung Bootloader Infomation release ver : 1004 Release etc : ------------------------------------------- UART2 is used to debug mode(0) load kernel start, size : 131072 + 2883584 byte load_cmac()[918 line]: entry->first_blk = 1, entry->no_blks= 1 1024 bit RSA Sign/Verify Test Success. authentication success XIP Kernel Image ... Starting kernel ... ------------------------------------------ SAMSUNG Mstar Kernel Version : 1004.84(RELEASE) ------------------------------------------ init started: SELP-BusyBox v1.6.0-VD Linux SELP.4.2.1.x (2010-03-25 09:52:34 KST ) multi-call binary starting pid 21, tty '': '/etc/rc.sysinit' /etc/rc.local start!!!! ------------------------------------------- VDLinux 1.1.1.x Mstar RootFS ver 1004 Used kernel ver(module is builed) 1007.88(RELEASE) ------------------------------------------- starting pid 32, tty '': '/bin/cttyhack' /etc/profile start!! /mtd_rwarea/PartitionSwitch_1_0 is detected... 2nd Partition is selected... mount: mounting /dev/stl0/14 on /mtd_appdata/ failed mount: mounting /dev/stl0/14 on /mtd_appdata/ failed umount: cannot umount /mtd_appdata/: Invalid argument _mod_sys_init.176 ioctl ****************************************** Application running is failed.. SW image is stopped.. ****************************************** SELP#> [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<< [CIP_AUTHULD]==================================================== [CIP_AUTHULD] Authuld Version : 1.1 : REL [CIP_AUTHULD] ==================================================== SELP#> . then stops, takes only the command (CB) but nothing is done, tv LS22PTD with firmware T-MSXMDEUC. warranty expired, any suggestion to restore it, with good easter.