SamyGO

Hey guys,

I send "factory + 3speed", now I have extended service Menu.
then I navigate in service menu to
Control--->Config option--->Type of PANEL KEY (the path: Control->SubOption->Type of PANEL KEY is not correct!)

set it first to " PDP horizontal", then to " horizontal "

and Power off TV.

but front panel don?t function

It seems that solution repair touch panel of D5003 don't function.
I have thought that the methode in Samygo Wiki is sure .

( sorry for my english )


Regards Martin

It worked , but with russian instructions. In a samygo wiki,the translation from russian to english is not so good and not complete.

Regards Martin

Glad, what is missing/incorrect? Could you please edit wiki with updated info? Thanks

First, I send "Info + factory" to be in service menu, then
send "factory + 3speed" to have extended menu.

"PANEL KEY ".--->set it first to " PDP horizontal", then to " horizontal.
"NUM OF PANEL KEY" to 7 then back to 6,
Change "KEY SENSETIVITY" to 36.
and change model TV to 5003 or 5800
at last go out from service menu with send "3speed +factory".

Regards Martin

Finally!!

Took several days trying to recover the panel and finally I made it.
The information in the Wiki and this thread has not helped me at all.
Change the model to D5800, did the steps in the wiki and got nothing.

So today again put D5003, update firmware from 1007-1008 (T-MSU4DEUC-1008.0)

- After updating I returned to the service menu.
- Activate extended menu.
- Change Model to D5800
- Control - Sub Option:
- KEY SENSITIVITY 74
- Control - Config Option:
- Num of AV 0
- Num of COMP 0
- Num of HDMI 2
- Numbers of PC 0
- Numbers of USB PORT 1
- Num of PANEL KEY 7, hit return and go back to put 6
- Type OF KEY PANEL PDPHoriz, hit return and go back to put Horizontal
- Vendor Fuction AUTO
- You press Return to get to the main menu
- Exit the menu with "3speed + factory"
- Turn off the TV
- Turn it on from the remote
- DONE!

Worked for me finally!!
Type: 22A6TF1E, Model: UE22D5003 (Changed to UE22D5800), T-MSU4DEUC-1008.0

I hope that helps

PS: Sorry for my english

Cool

DRaGMaRe wrote:Finally!!

Took several days trying to recover the panel and finally I made it.
The information in the Wiki and this thread has not helped me at all.
Change the model to D5800, did the steps in the wiki and got nothing.

So today again put D5003, update firmware from 1007-1008 (T-MSU4DEUC-1008.0)

- After updating I returned to the service menu.
- Activate extended menu.
- Change Model to D5800
- Control - Sub Option:
- KEY SENSITIVITY 74
- Control - Config Option:
- Num of AV 0
- Num of COMP 0
- Num of HDMI 2
- Numbers of PC 0
- Numbers of USB PORT 1
- Num of PANEL KEY 7, hit return and go back to put 6
- Type OF KEY PANEL PDPHoriz, hit return and go back to put Horizontal
- Vendor Fuction AUTO
- You press Return to get to the main menu
- Exit the menu with "3speed + factory"
- Turn off the TV
- Turn it on from the remote
- DONE!

Worked for me finally!!
Type: 22A6TF1E, Model: UE22D5003 (Changed to UE22D5800), T-MSU4DEUC-1008.0

I hope that helps

PS: Sorry for my english

Holy sh*t man you did it, lol I've just tried juuso method ant it didn't worked, now I need open my champagne and celebrate LOL

Works on UN32D4003?