SamyGO

Hi,

I need some help for ES6100 and Ex;link cable.

What I have do:

1. Set UART -> debug.
2. Make Ex-Link Cable for ES.
3. Try connect via putty, but get unreadable text on terminal.

I try do all step by step -> http://wiki.samygo.tv/index.php5/Ex-Lin ... 2FE_series
Where is explanation: Output should be human readable, like in the following listing. If you get nothing, then your cabling/settings are incorrect. If you get garbage, then you have problems with the MAX232 circuit.

Yes but what mean MAC32 circuit problem?
I try exchange Tx/Rx, try different speed, but nothing what can be human readable, what I miss?

Video ->http://ewabero.com/SamsungES6100ExLink.MTS

Thanks in advance
Ernikas

Possible, you have connection settings wrong. Check them first.

my first idea the same, what I set wrong terminal settings, but I checked some times it, but result is the same

What cable do you have?

serial <-> 3,5 jack

I meant what exact cable. Is that usb-ttl 3.3v or? What chip is it based on?

it similar to http://www.wiremunky.com/file/documents/exlink.gif

Why do you use B series cable on E series TV? This cable has 12V voltage and you can damage your TV easily. Disconnect it immediately!

You have to use cables with voltage converter, like for C and D series, but only difference is 3.5 jack instead of VGA.

hmm, so that exactly cable I must need to my Samsung ES6100