SamyGO

hi
I am new in this forum I hope to find a solution to my problem
I followed the method to hack my tv LAxxC450 to make LExxC630
Here is the method:

http://wiki.samygo.tv/index.php5/Enabli ... ck_on_C350

wifi function is activated
sound not working
in "Advanced" after the 00000. the "Picture" appears but is not clickable

what is the method to enable sound?
thank you

Don`t needed to repost whole wiki article, it is enough to give a link. I don`t know what is your sound problem, i remember step 12 on that manual is for sound issue. Check once again do you have control-config-headphone 0

I understood for the link, sorry
I repeat 5 or 6 times but the same problem
no sound
when I returned to version LAxxC450 sound returns
I give control-config-headphone 0
but the sound does not work
thank you

here are the pictures
http://im32.gulfup.com/EyuG1.jpg
http://im35.gulfup.com/meLa1.jpg

Headphone to 0
http://im35.gulfup.com/dG7d1.jpg

in "Advanced" after the 00000. the "Picture" appears but is disable
http://im18.gulfup.com/baTx1.jpg

hi
I'm waiting for help .... but no response
I only know is that it is possible to turn my tv LAxxC450 to another version that supports DLNA (through wi-fi)

hi to all
I finally find the solution
this is very simple, do not change the version LAxxC450 to LExxC630 I only activate 'extended service menu"with clone tv to usb
Go to SubOptions and exchange
RF Mute Time to 0
LNA to 1 Support
NETWORK Support - wirelless
Power Indication Support - on
BD Wise Support - on
Control - Config Option and change
All Share Support - on
LEDMotionPlus - on
Restart your TV
Finally DLNA (through wi-fi) is enabled "with LAxxC450"
thank you all

hello
after having the solution of the "DLNA"
is that I can install the software "Internet @ TV" for this version