Page 1 of 18
No SamyGO on patched T-MST10PDEUC-9999.0
Posted: Wed May 01, 2013 12:54 pm
by zarigo
Support topic for
viewtopic.php?f=53&t=5797#p41364 related issue.
Samsung ES5700
With netcat i can open Telnet at 1023 (like Miazza user last post)
Code: Select all
Cmd line: 192.168.1.85 1023
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1794.04
processor : 1
BogoMIPS : 1794.04
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : amber3
Revision : 0000
Serial : 0000000000000000
Regards from Spain
Thanks a lot!
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 1:00 pm
by juusso
@zarigo, how about ssh on 22 port and/or telnet on 23 port using putty?
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 1:27 pm
by zarigo
Refused Ssh on 22 port and/or telnet on23 port ussing putty.
Thanks again for your work!!
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 1:31 pm
by juusso
Code: Select all
/mnt/etc/init.d/01_01_catch_crap.init start
What output do you get?
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 1:53 pm
by zarigo
Code: Select all
Cmd line: 192.168.1.85 1023
/mnt/etc/init.d/01_01_catch_crap.init start
/mnt/etc/init.d/01_01_catch_crap.init: line 49: /mnt/bin/authuld_echop: not foun
d
sed: /dtv/usb/log: No such file or directory
date: can't set date: Bad address
Thu Jun 23 13:45:00 UTC 2011
mount.ko not found.
insmod: can't read '/mnt/lib/modules/2.6.35.13/kernel/drivers/pty/devpts.ko': No
such file or directory
tcpsvd: bind: Address already in use
nc: bind: Address already in use
mount: mounting devpts on /dev/pts failed: No such device
insmod: can't read '/mnt/lib/modules/2.6.35.13/kernel/drivers/pty/pty.ko': No su
ch file or directory
sh symlink exists
cp: can't stat '/dtv/usb/sd*/smb_userdata': No such file or directory
no smb_userdata found or copy error
Platform: T-MST10PDEUC
Amber Platform!....
checking adress 60000000 to 60440000
Serial Console alredy enabled or not found code
checking adress 60008000 to 60448000
Serial Console alredy enabled or not found code
checking adress 80008000 to 80448000
Serial Console alredy enabled or not found code
checking adress 40008000 to 40448000
Serial Console alredy enabled or not found code
checking adress a0008000 to a0448000
Serial Console alredy enabled or not found code
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 2:07 pm
by juusso
when did you install SamyGo? and what firmware number?
and what says command
dmesg | tail
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 2:39 pm
by zarigo
juuso wrote:when did you install SamyGo? and what firmware number?
and what says command
dmesg | tail
I have installed samygo today, with new widged update (30-04-2013).
Firmware version: T-MST10PDEUC-9999.0 (after dns trick)
Code: Select all
F:\>nc
Cmd line: 192.168.1.85 1023
dmesg | tail
##### send signal from USER, SIG : 9, WidgetEngine(4732)->WidgetEngine(4732) sys
_kill
##### send signal from USER, SIG : 10, WidgetEngine(4739)->exeDSP(67) sys_kill
##### call default signal (10) handler
##### send signal from USER, SIG : 9, WidgetEngine(4739)->WidgetEngine(4739) sys
_kill
##### send signal from USER, SIG : 10, WidgetEngine(4748)->exeDSP(67) sys_kill
##### call default signal (10) handler
##### send signal from USER, SIG : 9, WidgetEngine(4748)->WidgetEngine(4748) sys
_kill
##### send signal from USER, SIG : 10, WidgetEngine(4755)->exeDSP(67) sys_kill
##### call default signal (10) handler
##### send signal from USER, SIG : 9, WidgetEngine(4755)->WidgetEngine(4755) sys
_kill
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 4:41 pm
by juusso
@zarigo
Code: Select all
lsmod
ls -la /mnt/lib/modules/2.6.35.13/kernel/drivers/pty/
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 4:53 pm
by zarigo
LSMOD
Code: Select all
F:\>nc
Cmd line: 192.168.1.85 1023
lsmod
hid_microsoft 2032 0 - Live 0xbf310000
mousedev 7248 0 - Live 0xbf309000
evdev 5576 0 - Live 0xbf302000
usbhid 12872 0 - Live 0xbf2f9000
hid 31240 2 hid_microsoft,usbhid, Live 0xbf2ec000
rtnet5572sta 31400 0 - Live 0xbf2df000
rt5572sta 1295416 1 rtnet5572sta, Live 0xbf1a0000 (P)
rtutil5572sta 30436 2 rtnet5572sta,rt5572sta, Live 0xbf196000
usb_storage 30272 1 - Live 0xbf189000
ehci_hcd 47852 0 - Live 0xbf178000
usbcore 108904 6 usbhid,rtnet5572sta,rtutil5572sta,usb_storage,ehci_hcd, Live 0x
bf158000
tntfs 363728 0 - Live 0xbf0fa000 (P)
mdrv_emac 12576 0 - Live 0xbf0f1000 (P)
samsung_mstar 494248 0 - Live 0xbf066000
samsung_mali 83468 5 samsung_mstar, Live 0xbf04c000
rfs_fat 202648 7 - Live 0xbf015000 (P)
rfs_glue 61548 1 rfs_fat, Live 0xbf000000 (P)
Code: Select all
ls: /mnt/lib/modules/2.6.35.13/kernel/drivers/pty/: No such file or directory
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed May 01, 2013 4:56 pm
by juusso
This is very strange result, because divers should be there!