[SOLVED] Le22C451 black screen
Posted: Tue Sep 03, 2013 11:02 am
There are tv le22c451 (t-msx5deuc-2005.4) with SamyGO.
I did all the instructions, after reboot everything worked.
Again turned on the tv with flash drive and got a black screen.
Here's the current boot log after all the manipulations.
When you try to debug mode get it.
Any idea how to fix the black screen or go into debug mode?
I did all the instructions, after reboot everything worked.
Again turned on the tv with flash drive and got a black screen.
Here's the current boot log after all the manipulations.
Code: Select all
=================================
Samsung Bootloader Infomation
release ver : 1004 Release
etc :
=================================
UART2 is used to debug mode(0)
load kernel start, size : 131072 + 2883584 byte
load_cmac()[918 line]: entry->first_blk = 1, entry->no_blks= 1
1024 bit RSA Sign/Verify Test Success.
authentication success
XIP Kernel Image ...
Starting kernel ...
[SELP] preset_lpj manual setting 175616
================================================================================
SAMSUNG Mstar Kernel
Version : 1004.84(RELEASE)
================================================================================
init started: SELP-BusyBox v1.6.0-VD Linux SELP.4.2.1.x (2010-03-25 09:52:34 KST) multi-call binary
starting pid 21, tty '': '/etc/rc.sysinit'
/etc/rc.local start!!!!
##################################
VDLinux 1.1.1.x Mstar RootFS ver
1004
Used kernel ver(module is builed)
1007.88(RELEASE)
##################################
starting pid 32, tty '': '/bin/cttyhack'
/etc/profile start!!
/mtd_rwarea/PartitionSwitch_0_0 is detected...
1st Partition is selected....
_mod_sys_init.176 ioctl
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
insmod: cannot insert '/mtd_exe/samsung_mstar.ko': File exists (-1): File exists
******************************************************
Application running is failed..
SW image is stopped..
******************************************************
SELP#> [CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
[CIP_AUTHULD] ====================================================
[CIP_AUTHULD] Authuld Version : 1.1 : REL
[CIP_AUTHULD] ====================================================
[CIP_KERNEL] Success!! Authuld is successfully completed.
Code: Select all
SELP#> 10041004
-/bin/sh: 10041004: not found
SELP#>