C6700 to C6800 PVR mod problem
Posted: Thu Oct 17, 2013 8:28 pm
Hello, I have read many posts on modding my C6700 to C6800 in order to enable PVR. I even found a SAMSUNG SERVICE REMOTE CONTROL TM930 but I have not been successful. Even worse, my CI+ digital cable is not working any more... Let me tell you what I did:
- I have a 32C6710 (C6700 series) with the latest firmware (T-VALDEUC-3018.1, see attached image which I shot before modding anything)
- I went into the normal remote with the magic key combinations, enabled Hotel mode. Shut down TV, started up and did Clone to USB onto FAT32 USB key. So far so good. I powered down and then powered on.
- Then I tried to change the model in the Hotel mode but even with the TM930 service remote I probably pushed the wrong buttons but it did not work. Then I powered off and now it looks like I can't disable hotel mode anymore (don't know how as I don't see that option anymore) and my digital CI+ can not be selected anymore when I turn on the TV.
I might have change the Tuner type by accident and I don't know what type of Tuner I should select. Is this SEC_TCS for aerial, cable and sattelite (in Holland)?
I'm pretty sure I have messed up a bit but hopefully not too much. Is there anybody who can help me out to put everything back to work and enable PVR? There are just too much instructions out there.
I can't use the wireless tool I read as I'm on a mac. That's the reason I got the service remote but then again on that remote there is no 3SPEED button...I'm lost.
Thanks Samsung modders for any help
- I have a 32C6710 (C6700 series) with the latest firmware (T-VALDEUC-3018.1, see attached image which I shot before modding anything)
- I went into the normal remote with the magic key combinations, enabled Hotel mode. Shut down TV, started up and did Clone to USB onto FAT32 USB key. So far so good. I powered down and then powered on.
- Then I tried to change the model in the Hotel mode but even with the TM930 service remote I probably pushed the wrong buttons but it did not work. Then I powered off and now it looks like I can't disable hotel mode anymore (don't know how as I don't see that option anymore) and my digital CI+ can not be selected anymore when I turn on the TV.
I might have change the Tuner type by accident and I don't know what type of Tuner I should select. Is this SEC_TCS for aerial, cable and sattelite (in Holland)?
I'm pretty sure I have messed up a bit but hopefully not too much. Is there anybody who can help me out to put everything back to work and enable PVR? There are just too much instructions out there.
I can't use the wireless tool I read as I'm on a mac. That's the reason I got the service remote but then again on that remote there is no 3SPEED button...I'm lost.
Thanks Samsung modders for any help