C530 bricked HELP !!!
Posted: Mon Jan 13, 2014 3:59 am
I run from telnet console command REBOOT
and after that my tv won`t start
I tried to unbrick my TV with EEPROM Reset but no luck (http://wiki.samygo.tv/index.php5/UnBric ... PROM_Reset)
also tried http://wiki.samygo.tv/index.php5/Recove ... ked_Device but when I hold Ctrl+c noting hepend.
in exlink console a can see only
How to restore firmware to repair TV
Thanks in advance
and after that my tv won`t start
I tried to unbrick my TV with EEPROM Reset but no luck (http://wiki.samygo.tv/index.php5/UnBric ... PROM_Reset)
also tried http://wiki.samygo.tv/index.php5/Recove ... ked_Device but when I hold Ctrl+c noting hepend.
in exlink console a can see only
and this masage repeads in intervals of 10 seconds=================================
Samsung Bootloader Infomation
release ver : 1004 Release
etc :
=================================
UART2 is used to UART or logic mode(1)
load kernel start, size : 131072 + 2883584 byte
load_cmac()[918 line]: entry->first_blk = 1, entry->no_blks= 1
1024 bit RSA Sign/Verify Test Success.
authentication success
XIP Kernel Image ...
Starting kernel ...
How to restore firmware to repair TV
Thanks in advance
