Page 1 of 1
Enable telnet on C530
Posted: Tue Feb 04, 2014 12:58 am
by stefanbak
Hello,
I have LE40C530 with T-MSX5DEUC firmware, i changed model in service menu to C550 and connect to local network via WiFi. I've hacked TV via hotel mode and script run.sh works fine.
I would like to enable telnet root access from my PC. Could you help me with this topic ? I don't know where can I find nesessery files and scripts. i tried solutions from forum (busybox, extension pack), but putty still return "Connection refused". TV is responding only for a ping and is visible for DLNA, but not telnet.
Please give me some tips how to get access to root console via telnet from my PC.
Re: Enable telnet on C530
Posted: Wed Feb 05, 2014 6:39 pm
by beatfreak
try ssh connection with putty, but first check if ping works
and post a list of the names of the scripts in SamyGO/etc/init.d/ on your usb-drive
and your current run.sh
Re: Enable telnet on C530
Posted: Sun Feb 16, 2014 1:03 am
by stefanbak
Ping works, but ssh not. I've read from here
http://wiki.samygo.tv/index.php5/Compat ... series_TVs that only telnet seems to method to control tv remotly - my model is C530.
i've copied whole SamyGo folder on my USB and didn't make any changes inside. In run.sh is only echo command to create run.ok file.
Re: Enable telnet on C530
Posted: Mon Feb 17, 2014 8:50 pm
by beatfreak
so if you get the ok in run.ok file you have to change run.sh file to start your
SamyGO Extensions
Re: Enable telnet on C530
Posted: Sun Apr 06, 2014 5:12 pm
by stefanbak
Could you help me with runing extension from usb? I dont know which file is startup file for extensions and which is responsible for telnet?
Re: Enable telnet on C530
Posted: Wed Apr 23, 2014 6:14 pm
by stefanbak
For this moment i've downloaded SamyGO-All-Extensions-v0.03.6-r12-for-T-MSX5DEUC-20110103183808.zip and tried to run from run.sh. My router is set to give tv always the same IP (192.168.0.22) and now I can ping this address something about 20 seconds after tv boot.
I attach most important files from my pendrive.
My tv details
run.sh
Code: Select all
#!/bin/sh
ifconfig >> /dtv/usb/sda1/ip.log
sh /dtv/usb/sda1/SamyGO/rcSGO >> /dtv/usb/sda1/SamyGO.log
echo 'Poszlo' >> /dtv/usb/sda1/run.ok
SamyGO.log
Code: Select all
./etc/rc.sysinit: line 94: /dtv/usb/sda1/SamyGO/opt/privateer/sbin/depmod: not found
insmod /dtv/usb/sda1/SamyGO/lib/modules/*.ko, this behavior is outdated modules are handled by the init scripts!
Replace /dtv/usb/sda1/SamyGO/lib/modules/treasure/*.ko
mknod: /dev/sam/fb0: No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/drivers/video/cfbcopyarea.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/drivers/video/cfbfillrect.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/drivers/video/cfbimgblt.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/drivers/usb/input/usbhid.ko': No such file or directory
mkfs.vfat 2.11 (12 Mar 2005)
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/drivers/usb/gadget/dummy_hcd.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/drivers/usb/gadget/g_file_storage.ko': No such file or directory
real storage device at: /sys/block/sda/device/model
fuse 66816 0 - Live 0xe089d000
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/net/sunrpc/sunrpc.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/fs/lockd/lockd.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/fs/nfs_common/nfs_acl.ko': No such file or directory
insmod: can't open '/dtv/usb/sda1/SamyGO/lib/modules/2.6.28.10/kernel/fs/nfs/nfs.ko': No such file or directory
Search Shares on: /dev/pts is mounted
which: no hid2hci in (/dtv/usb/sda1/SamyGO/opt/privateer/sbin:/dtv/usb/sda1/SamyGO/opt/privateer/bin:/dtv/usb/sda1/SamyGO/opt/privateer/usr/bin:/dtv/usb/sda1/SamyGO/opt/privateer/usr/sbin:/dtv/usb/sda1/SamyGO/sbin:/dtv/usb/sda1/SamyGO/bin:/dtv/usb/sda1/SamyGO/usr/bin:/dtv/usb/sda1/SamyGO/usr/sbin:/sbin:/bin:/usr/sbin:/usr/bin)
Starting Bluetooth subsystem: hcidCan't get device info: No such device
sdpd hidd.
recorder share not mounted!
mv: cannot rename '/dtv/usb/sda1/SamyGO/etc/ssmtp': No such file or directory
(30)Read-only file system: httpd: could not open error log file /mtd_ram/error_log.
Unable to open logs
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 19: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 23: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 24: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 25: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 26: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 27: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 28: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 29: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 30: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 31: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 32: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 33: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 34: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 35: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 36: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 37: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 38: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 39: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 40: cannot create /mtd_ram/info: Read-only file system
/dtv/usb/sda1/SamyGO/etc/init.d/99_99_z_sendinfo.init: line 41: cannot create /mtd_ram/info: Read-only file system
cat: can't open '/mtd_ram/info': No such file or directory
sendmail: Cannot open mailhub:25
Re: Enable telnet on C530
Posted: Thu Apr 24, 2014 8:46 pm
by beatfreak
ok, so your samygo extensions get started
i'll have to take a look into the init scripts for msx5deuc to find the mtd_ram thing...
[EDIT]: used in apache.init and sendinfo.init, need to check output of "/bin/busybox mount" for a good substitution, i guess /dtv/ would be ok
could you post a list of the filenames in (usb drive)/SamyGO/etc/init.d/ ?
ssh should work anyway (enabled by default)