SamyGO

@Decipher88 Did you already accept the connection? You can DENY the connection from Menu > Network > Multimedia Device Manager. Select the device, click OK and select DENY from the menu and it will not connect or prompt you again. Do not delete the device as you will get prompts again. If he has fri...

@rejected,

This post may help. Some panels are edge lit, some are direct lit, some have zoned local dimming, and at least one is FALD.

https://forum.samygo.tv/viewtopic.php?f ... 005#p87005

When I get time I'll update the missing codes in my post.

John.

Your USB drives need to be NTFS format!

John.

Hello tassos,

Unfortunately, plugging into the headphone socket breaks the circuit for the TV speakers. The only way around that would be to take the back off the TV and solder a wire across the terminals, or replace the headphone socket with a non signaling type.

John.

Right! Samsung use panels from several different manufacturers (some better than others). Because the firmware is the same for a whole range of Samsung TV models it contains preset data for each size, manufacturer and model. Choosing a panel type different to what is fitted could be a disaster. :cry...

Hi DannyPo,

this link shows how to change your Smart Hub region for J series TV's and should also work for your K series.

Please let us know how you get on.

John

http://www.eyeondemand.com/2015/08/26/h ... app-store/

Hi semoG,

Do NOT change your panel type, at best you'll ruin your picture, at worst you'll brick your TV.

You were asking about changing model number in another thread - I don't think you can do that from the service menu.

John.

Hello Rares, If you have shared your media library correctly you should see an entry for your PC in Smart Hub > My Content. It should also should be visible in the list when you press the SOURCE button. You need to make sure that the PC is not blocking the TV and / or your media library in Media Str...

OK thanks cyro3.

Did you change anything else in the service menu?

John.

lenivec,

Well you could look in Menu > Broadcasting > CommonInterface to make sure it's configured correctly for your service.

John.