SamyGO

Also LEFT-RIGHT do NOT work after the command: # injectso `pidof exeDSP` /mtd_rwarea/seekpatch.so patch_main RIGHT=120,LEFT=-120 Module injector V1.2 for ARM based CPUs. (copyleft) SmartSmurf 2010 (smartsmurf@shared-files.de) Info: Import dlopen set at 0x00530898 Info: Import dlsym set at 0x00530d60...

I tested a blue.sh script as follow: #!/bin/sh # sh blue_my.sh & blue_my.sh script use busybox telnet... If I call blue.sh or blue_my.sh manually from shell it work perfectly. If a call blue.sh pressing the blue button IT DO NOT WORK > I do not have telnet working...!?!?!? The only difference th...

@gchirtoaca: Thanks for tour help, you were right!! Anyway even if the injectso command now complete without error I have the following odd behaviour (injectso `pidof exeDSP` /mtd_rwarea/seekpatch.so patch_main UP=120,DOWN=-120,RIGHT=30,LEFT=-30) UP and DOWN buttons both go ahead 2 seconds instead +...

My need is to send a command to my Synology NAS on the network.
Therefore I need telnet.
The sending key it was just a test/debug step.

I also tryed now with PVR+ 3.0 but unfortunately I had always the same problem.
It is this problem ommon to everybody or is it only for me?

Thanks for help

with the command: injectso 'pidof exeDSP' /mtd_rwarea/seekpatch.so patch_main UP=120 on the telnet session I got the following error message: Module injector V1.2 for ARM based CPUs. (copyleft) SmartSmurf 2010 (smartsmurf@shared-files.de) Error: ptrace_attach and the seek do NOT work! can you please...

Hello,

any feedback about my problem? (see above: telnet command within the /mtd_tlib/GGame/PVRplus/scripts/blue.sh script)
I cannot understand why it fails?
I think it is related to the way the script is submitted from PVRPlus
Please help
Thanks

Not working even with full path.

I confirm you that:
-the script called from the shell works perfectly (/bin/sh /mtd_tlib/GGame/PVRplus/scripts/blue.sh)
-If I run the script pushing the blue button it do not work, but I can see the script running with "ps" command.

Please help
Thanks

(PVR+ 2.0): I tryed to setup a very simple script for blue button >> /mtd_tlib/GGame/PVRplus/scripts/blue.sh #!/bin/sh # (echo 7)|busybox telnet 192.168.0.15 2345 sleep 5 The script is expected to send a remote command to increase volume. If I run the script manually (via telnet) it works perfecty. ...

I found the right value for me is 40960 (exactly 10 times the standard value)

After some screencap anyway the offset went lost and I start again to have the splitted image.
After switch off and on the tv again ok for a while.

Whe I try to capture OSG I got an offset in the image file... I tried both PRE-CH 8 and PRE-CH 1

How can I solve it?
Thanks a lot