SamyGO

The backlight was not working properly, I replaced it and it works but when I installed the board and connected the 2 straight cables to the T-con, there is no backlight. I connected the satellite receiver with a scart cable and there are tons of them. When I disconnect one flat cable (left or right...

I used the existing nand memory
I did not have a new one

With the help of hot air I removed the nand memory IC1302:K9GAG08U0E SCB0
My friend has inserted memory contents using the TNM5000
I have no TNM5000, I plan to buy soon
With the help of hot air,
I fixed my memory on the motherboard

With the web: https://www.elektroda.pl/rtvforum/viewt ... 7#16528197
I wrote the content in nand memory,
TV works,
Thanks for your help!

The TV had a picture and a tone, that's fine
the next day when it was turned on, there was an error I wrote
Please help
juusso,thanks!

If I install software into nand memory IC1302:K9GAG08U0E SCB0
Will this be okay?

TV Samsung, Model:UE40D5500RW Type No. UE40D5500 Model Code:UE40D5500RWXXH Version No. 08 S/N:Z8CE3SABB00506P Here I am new, please help TV plug 220VAC, switch on, Samsung logo writing, logo disappear, backlight yes, red LED flash 5 times, stop slightly, rewrite Samsung logo and repeat flashing red ...