SamyGO

I solved it. Between the various tests, I realized that the first LED burned out. I replaced it and made the connections correctly. Then I modified the script to fit the nodeMCU Amica esp8266mod 12-f. For the WS2801 I put RGB colours as order. Now everything works! Congrats on the superb work and t...

I took a USB FTDI adapter and now the tv recognizes it correctly. now, I have an ESP8266MOD 12-F. I connected data and clock to GPIO 14 and 12. I attached the TX of the FTDI USB adapter to the GPIO 13. inside sambiglight-arduino.ino I entered the number of LEDs, I removed the comment on line 9 to e...

ok, thank you very much for the advice! I tried with another adapter but the result doesn't seem to change. The first one I tried is prolific pl2303, usually, these give problems. The second is a generic one, but it doesn't seem to change anything! [Sambilight] SamyGO E/F/H libSambilight v1.3.1 - (...

use first post from @tasshack ...and from FTDI usb connector to USB connector in TV ws.jpg I use the w2801 led strips which have 4 pins: 5v, CK, SI, GND. So the link you suggest to me is not possible to do this. Also in the first post, it is specified that the use of Arduino or ESP8266 NodeMCU is r...

Hi everyone! i am trying to make this app work, but there is something that is not very clear to me. I have a tv ue40es6560 and the leds I own are ws2801. I connected a usb-serial adapter and from the log it is detected as: usbcore: registered new interface driver usbserial USB Serial support regis...

Good afternoon. I finally had some time and was able to figure out what the problem was with my sambilight. Apparently the power does not pass to the various LED's. I cut my led strip and used "L" unions for the corners which don't work well! Can anyone suggest me the best method to make ...

Hi, I have an Arduino pro micro, I'm using the attached sketch, I'm using my H-series TV and the LED's used are the ws2812b. Ok, have you same count of LED´s in Arduino sketch (example my value is 182 ) and same in file 01_99_Sambilight.init (example my values H_LEDS=59, V_LEDS=32) ? And correct se...

brunogts77 wrote: ↑Mon Apr 18, 2022 7:01 pm Doesnt work , any sugestion?

1) which type of arduino are you using? ....you used the attached sketch, or wrote your own?
2) on which TV...UE42F5570?
3) which type of LED you using? ...WS2812B or other?

What file should I put on Arduino? I'm using "Adalight-fastLED"! Or should I use "sambilight"? Adalight protocol is OK, but why invent something that's already been invented, all necessary files are attached to 1. post from Tasshack...only modify number of LEDs in attached ardui...

1) check wire connection between each stripes
2) have you an adequate power supply for LED stripe? 12V? 5V? Adequate Amperes in relation to number of LED´s?
3) have you correct number of LEDs in Arduino sketch and same number in 01_99_libSambilight.init?