SamyGO

HI!! I have created a fork! The libSambilight project has been modified to support multiple WLED devices, allowing each device to control a specific section of LEDs. To use multiple WLED devices with libSambilight, you need to properly configure the 01_99_Sambilight.init file. Follow these steps: De...

I think i fixed it!
From the power supply I made two different cables come out. Not as seen in the first post.
One to power the leds and one for the esp8266. Then I connected the GND PIN of the esp with the GND of the leds, so that there is no flickering. Now i have no more problems!

Hi everyone! I don't know if it's my problem or a bug. it happens to me that when I turn on the TV, after a few minutes, the LEDs remain fixed on the white colour, it always happens when the projected image is white. I noticed that the esp8266 is completely blocked and no longer responds to any comm...

Not work on UE40ES6560

It happens to me that during the night, when the tv is off, all the green LEDs light up. I turn off the power to the LEDs, put it back on and they stay off. Then when I turn on the tv, they initially work fine, but after a few minutes, everything that should be black is displayed in green. I have to...

my tv is not compatible with hevc 10 bit. is it possible to stream channels via tvheadend of hevc channels?

I solved it. Between the various tests, I realized that the first LED burned out. I replaced it and made the connections correctly. Then I modified the script to fit the nodeMCU Amica esp8266mod 12-f. For the WS2801 I put RGB colours as order. Now everything works! Congrats on the superb work and th...

I took a USB FTDI adapter and now the tv recognizes it correctly. now, I have an ESP8266MOD 12-F. I connected data and clock to GPIO 14 and 12. I attached the TX of the FTDI USB adapter to the GPIO 13. inside sambiglight-arduino.ino I entered the number of LEDs, I removed the comment on line 9 to en...

ok, thank you very much for the advice! I tried with another adapter but the result doesn't seem to change. The first one I tried is prolific pl2303, usually, these give problems. The second is a generic one, but it doesn't seem to change anything! [Sambilight] SamyGO E/F/H libSambilight v1.3.1 - (c...

use first post from @tasshack ...and from FTDI usb connector to USB connector in TV ws.jpg I use the w2801 led strips which have 4 pins: 5v, CK, SI, GND. So the link you suggest to me is not possible to do this. Also in the first post, it is specified that the use of Arduino or ESP8266 NodeMCU is r...