Page 1 of 1
[App] STFU patch for C series
Posted: Fri Feb 07, 2014 5:06 pm
by sectroyer
This patch allows setting Channel/PVR/Timeshift/Movie Player Info banner and USB Popup timers. This one was much more complex then previous ones but I hope that it reliable and will work for everyone
The patch takes few seconds (5-7) to complete. That's completely normal and is caused by very limited number of function symbols in my exeDSP (not sure if that's true for all models/firmware versions). Nevertheless it's pretty stable and works. Hope you will enjoy it
Please post your TV model and firmware version.
Re: [App] STFU patch for C series
Posted: Fri Feb 07, 2014 7:34 pm
by greenhorn
How do I call it? Is there a pattern?
Re: [App] STFU patch for C series
Posted: Fri Feb 07, 2014 8:47 pm
by sectroyer
greenhorn wrote:How do I call it? Is there a pattern?
If you call any of the patches that I have provided without any arguments (or with wrong ones) it will display a list of options.
./stfupatch -n exeDSP --channel 1000 -d
Will change the timer for Channel Info Banner to 1000 milliseconds (1 second) and display debug informations (-d). You can also set all the timers with a single command:
./stfupatch -n exeDSP --channel 1000 --pvr 1000 --timeshift 1000 --movie 1000 --usb 1000 -d
There only two problem is that you cannot use one command to set --pvr and then another to set --timeshift (they depend on each other). You have to set them with one command or in the opposite order (first --timeshift then --pvr). And in order to reset any (or all ) of the timers you have to reboot the TV.
Re: [App] STFU patch for C series
Posted: Fri Feb 07, 2014 9:10 pm
by greenhorn
Wow. Another great app! Works great. Great job. I managed to make it auto start. Here is my autostart script together with the sectroyer's app:
1. Copy the stfupatch file in the prepared usb pen with folder: SamyGO/opt/privateer/usr/sbin/
2. Copy the 99_99_StfuON.init file in the prepared usb pen with folder SamyGO/etc/init.d/
3. Restart TV
Re: [App] STFU patch for C series
Posted: Mon Feb 24, 2014 2:27 pm
by tempinbox
tried on 3008.3 3011 3018.1 and it works!
Re: [App] STFU patch for C series
Posted: Tue Dec 30, 2014 8:22 pm
by nurhachi
Can I use this patch to remove the info box in the top left corner of the screen when I change resolution on an HDMI source? If not, does anyone know a way of doing that?
Re: [App] STFU patch for C series
Posted: Tue Jun 16, 2015 10:27 pm
by beatfreak
did you cover the "signal information" page with that?
sometimes when i'm testing with my coax wiring i'd like to have this page not disappearing after 30sec