c350: i/o error at boot
Posted: Sat Dec 15, 2012 3:58 pm
Hello,
My LE19C350D1W is not working anymore. It does display nothing, but the backlight seems to glow. I've attached an rs232/usb dongle to the VGA port and got some errors during startup (see below). Full log is on http://pastebin.com/2dctiSfg. Does anyone seen something like that? Is it broken flash chip? Can I replace it?
The only modification I've done was enabling video player by changing type to c450 (hack using remote only), it was working quite good about a year till the "blackout".
Of course the guarantee expired and I wouldn't like to pay for the new TV only because of one little chip. I was afraid of backlight problem, or maybe bad pixels, but why flash????
greetings,
Micha?
LinuStoreIII_NERR: _fsr_dup_write[95] stl: transfer error=80040005
LinuStoreIII_NERR: stl_transfer[182] STL: fsr block device transfer error =ffffffff
Buffer I/O error on device stl10, logical block 44
lost page write due to I/O error on stl10
My LE19C350D1W is not working anymore. It does display nothing, but the backlight seems to glow. I've attached an rs232/usb dongle to the VGA port and got some errors during startup (see below). Full log is on http://pastebin.com/2dctiSfg. Does anyone seen something like that? Is it broken flash chip? Can I replace it?
The only modification I've done was enabling video player by changing type to c450 (hack using remote only), it was working quite good about a year till the "blackout".
Of course the guarantee expired and I wouldn't like to pay for the new TV only because of one little chip. I was afraid of backlight problem, or maybe bad pixels, but why flash????
greetings,
Micha?
LinuStoreIII_NERR: _fsr_dup_write[95] stl: transfer error=80040005
LinuStoreIII_NERR: stl_transfer[182] STL: fsr block device transfer error =ffffffff
Buffer I/O error on device stl10, logical block 44
lost page write due to I/O error on stl10