Originally I had a Chi Mei Panel installed; when it returned it had a Samsung panel installed instead (which I expected to look much better!). The question is, does it need updating in the Service menu to recognise the new panel?
I have tried resetting the TV to defaults after installing the latest firmware (T-VALDEUC-3018.1) as it was originally on 3015; but this if anything seems to have made things even worse - the error correction around images and in particular lettering looks awful. Is it possible to downgrade to 3015 again?
- SamyGO Project Donor
- Posts: 590
- Joined: Tue Aug 23, 2011 9:03 am
- Location: Hamburg
but if you are still under warranty try to contact samsung again
how did you determine your type of display installed?
you could find someone with exactly the same model as yours and compare the service-menu settings...
FYI: you can close your ssh session with SamyGO with
Code: Select all
The TV was bought from Costco, so gets repaired by their appointed repairers. After they told me threee different stories about what was being replaced i didn't trust they would do anything, so prior to it going off i marked and made a note of all part and serial numbers, then checked them after.
Prior to repair, panel was a Chi Mei Optoelectronics, p/no V400H1-LH9 Rev C2
After repair, the panel is a Samsung, p/no LTF400HF15 Rev A02
Based on the above, you'd expect the picture to be better...but it isn't! I would ask them to take again but after the last attempt i'm loathed to let them have another go....!