***UN55C6300 w Edimax 7811un***

This forum for information that related with C series hardware instead of firmware/software.
Post Reply

Posts: 1
Joined: Sat Feb 15, 2014 8:38 pm

***UN55C6300 w Edimax 7811un***

Post by pacman762 »

As a Linux noob, I am needing help to see if my Edimax 7811un (believe it is a Realtek chipset) can be modded to change its PID & VID values for

use with a Samsung UN55C6300.
I have followed the SamyGoTV wiki using an Ubuntu 10.04 up to step 10. However, when I attempt to run 'iwpriv wlan0 e2p 208=04E8' ...I get an

'Invalid command: e2p' error msg. I've pasted steps 7-10 below.

root@ubuntu:/home/administrator# sudo insmod 8192cu.ko
root@ubuntu:/home/administrator# sudo ifconfig wlan0 up
root@ubuntu:/home/administrator# sudo iwpriv wlan0
wlan0 Available private ioctls :
write32 (8BE0) : set 2 int & get 0
read32 (8BE1) : set 1 int & get 16 char
driver_ext (8BE2) : set 0 & get 0
apinfo (8BE4) : set 1 int & get 0
setpid (8BE5) : set 1 int & get 0
wps_start (8BE6) : set 1 int & get 0
dbg (8BE7) : set 2 int & get 0
rfw (8BE8) : set 3 int & get 0
rfr (8BE9) : set 2 int & get 16 char

root@ubuntu:/home/administrator# sudo iwpriv wlan0 e2p 208=04E8
Invalid command : e2p

I've tried extensive searches on this issue of anyone who has successfully changed the VID & PID on an Edimax 7811un with no complete solution.
Has anyone successfully modded a Edimax 7811un or can help me complete this mod?


Post Reply

Return to “[C] Hardware”