Need image file D5500

Here is information about customize your D series firmware..:!:This forum is NOT FOR USER questions or problems but DEVELOPER.
Post Reply

inkub
SamyGO Project Donor
Posts: 15
Joined: Tue Sep 23, 2014 1:53 pm

Need image file D5500

Post by inkub »

Hello.
Does someone have partitions:
uImage
rootfs.img

From D5500?

BR
Last edited by inkub on Thu May 12, 2016 12:10 pm, edited 1 time in total.
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Heed image file D5500

Post by juusso »

Do not try to flash it... What is your goal?

Sent from my X98 Plus 3G using Tapatalk
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
inkub
SamyGO Project Donor
Posts: 15
Joined: Tue Sep 23, 2014 1:53 pm

Re: Heed image file D5500

Post by inkub »

Thank you for your answer.
I realize that rootfs.img is digitally signed.
Just needs to look at it :)

I need to look at:
SpoilerShow
Switch to Earphone UART
SEC

Switch to Micom UART


=================================
onboot (Feb 25 2011 - 16:08:03)
release ver : 1002 - RELEASE
etc :
=================================

Onboot X6 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 3538944 byte
Jump Kernel....

auth success by h/w sha1 UART1 is used to debug mode.
[SELP] preset_lpj manual setting 894976
================================================================================
SAMSUNG Mstar Kernel
Version : 1003_192 RELEASE
================================================================================
init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04:20 KST)
starting pid 26, tty '': '/etc/rc.local'
/etc/rc.local start!!!!
=====================================================
ROOTFS VERSION : "Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE"
===========##### send signal from USER, SIG : 0, init(1)->???(26) sys_kill
==========================================
mount: mounting devpts on /dev/pts failed: No such device
starting pid 37, tty '': '/bin/cttyhack -/bin/sh'
/etc/profile start!!
====================================================================
[SELP] fsr module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] fsr_stl module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_glue module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_fat module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
"Mstar-X6 1007" KERNEL MODULE VERSION : "1003_192 RELEASE"
+ otp lock check
OTP INFO : First Block OTP is Locked.
OTP INFO : OTP Block is not Locked.
mount mtd_rwarea
mount mtd_exe
mount mtd_rocommon
mount mtd_rocommons
Run FastLogo...
====================================================================
[SELP] FastLogo module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
=====================================

Update Images with Standalone!!!

=====================================
USB start...
mount mtd_rwcommon
mount mtd_swu
/etc/Scripts stand_alone_upgrade.sh start!!!
cp: cannot stat '/mtd_swu/standalone/StandAlone.sh': Not a directory
cp: cannot stat '/mtd_swu/standalone/StandAloneUpgrade': Not a directory
cp: cannot stat '/mtd_swu/standalone/libSDAL_Wrapper.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libTDsStandAlone.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/shadow_eu.ttf': Not a directory
cp: cannot stat '/mtd_exe/StandAlone/shadow_jp.ttf': No such file or directory
cp: cannot stat '/mtd_exe/StandAlone/shadow_ko.ttf': No such file or directory
cp: cannot stat '/mtd_swu/standalone/shadow_s_cn.ttf': Not a directory
cp: cannot stat '/mtd_swu/standalone/shadow_t_cn.ttf': Not a directory
cp: cannot stat '/mtd_exe/StandAlone/shadow_us.ttf': No such file or directory
====================================================================
[SELP] usbcore module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] usb_storage module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] ehci_hcd module load!!(1003_192 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
Copy lib files...
cp: cannot stat '/mtd_swu/standalone/ld-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libc-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libdl-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libgcc_s.so.1': Not a directory
cp: cannot stat '/mtd_swu/standalone/libm-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libnss_dns-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libnss_files-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libnss_nis.so.2': Not a directory
cp: cannot stat '/mtd_swu/standalone/libnss_nisplus.so.2': Not a directory
cp: cannot stat '/mtd_swu/standalone/libpthread-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libresolv-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/librt-2.8.so': Not a directory
cp: cannot stat '/mtd_swu/standalone/libstdc++.so.6.0.10': Not a directory
Start link lib...
ln: /mtd_swu/standalone/ld.so.1: Not a directory
ln: /mtd_swu/standalone/libc.so.6: Not a directory
ln: /mtd_swu/standalone/libdl.so.2: Not a directory
ln: /mtd_swu/standalone/libgcc_s.so: Not a directory
ln: /mtd_swu/standalone/libm.so.6: Not a directory
ln: /mtd_swu/standalone/libnss_dns.so.2: Not a directory
ln: /mtd_swu/standalone/libnss_files.so.2: Not a directory
ln: /mtd_swu/standalone/libpthread.so.0: Not a directory
ln: /mtd_swu/standalone/libresolv.so.2: Not a directory
ln: /mtd_swu/standalone/librt.so.1: Not a directory
ln: /mtd_swu/standalone/libstdc++.so: Not a directory
ln: /mtd_swu/standalone/libstdc++.so.6: Not a directory
End...
Copy lib files...
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
insmod: can't insert '/mtd_swu/standalone/samsung_mstar.ko': unknown symbol in module, or unknown parameter
umount mtd_exe,mtd_rocommon
/etc/Scripts/stand_alone_upgrade.sh: line 155: /mtd_swu/standalone/StandAlone.sh: not found
/etc/Scripts/stand_alone_upgrade.sh: line 158: /mtd_swu/standalone/StandAlone.sh: not found
/etc/Scripts stand_alone_upgrade.sh end!!!
[CIP_KERNEL] ae80 is authuld length : file open success(rootfs)
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
[CIP_AUTHULD] ====================================================
[CIP_AUTHULD] Authuld Version : 1.5 : REL
[CIP_AUTHULD] ====================================================
Why run:
Scripts stand_alone_upgrade.sh

If only you can run the console :(

Please send rootfs.img :)
inkub
SamyGO Project Donor
Posts: 15
Joined: Tue Sep 23, 2014 1:53 pm

Re: Need image file D5500

Post by inkub »

OK.

T-MST5DEUC_1023 have this file inside ;)

BR
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Need image file D5500

Post by juusso »

If you have root access, you can dump this file from inside.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
inkub
SamyGO Project Donor
Posts: 15
Joined: Tue Sep 23, 2014 1:53 pm

Re: Need image file D5500

Post by inkub »

I do not have root.....

It looks like I have a set flag UPGRADE_START .

Code: Select all

$SWU_DEPOT/StandAlone.sh -reboot
not run, and UPGRADE_START not delete :/

It looks like, I do not have files in /mtd_exe

Time to run brains. :ugeek:
inkub
SamyGO Project Donor
Posts: 15
Joined: Tue Sep 23, 2014 1:53 pm

Re: Need image file D5500

Post by inkub »

TV repaired.

Just create a directory /mtd_swu/standalone
And turn off WATCHDOG

This is all.

BR

inkub
User avatar
juusso
SamyGO Moderator
Posts: 10129
Joined: Sun Mar 07, 2010 6:20 pm

Re: Need image file D5500

Post by juusso »

Oki, thanks for reporting :)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE
inkub
SamyGO Project Donor
Posts: 15
Joined: Tue Sep 23, 2014 1:53 pm

Re: Need image file D5500

Post by inkub »

How is it done?
Not having root?

:geek: :arrow: :ugeek:

Post Reply

Return to “[D] Firmware”