ex-link RS-232 port on PNxxD8000

This forum is for information related with D series hardware.
Post Reply

User avatar
prairie
SamyGO Project Donor
Posts: 303
Joined: Wed May 04, 2011 10:30 pm

ex-link RS-232 port on PNxxD8000

Post by prairie » Fri May 20, 2011 10:50 pm

I have successfully used the ex-link port to remote control my display via the RS-232 port (set in UART mode). You can use the software available here, http://www.eventghost.org/forum/viewtop ... f=9&t=2059 with the Samsung TV plug-in.
PN60F8500AFXZA
T-FXPAKUC 1206.3 + SamyGO

"BrickMaster 2015"

User avatar
julianbb
Posts: 163
Joined: Fri Dec 10, 2010 1:18 pm
Location: Romania

Re: ex-link RS-232 port on PNxxD8000

Post by julianbb » Tue Oct 18, 2011 7:03 am

You play with fire...
It works without gnd because you HAVE gnd from pc to tv from earth gnd on the 220v power plug... This is very dangerous for your tv /pc (chips ports)
Gnd could be connected also on VGA metal case only...
"Everything is possible... The impossible just takes longer..." (Dan Brown)

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: ex-link RS-232 port on PNxxD8000

Post by juusso » Tue Oct 18, 2011 8:37 am

23331003 for models 6 series and above.

Try swap rx and rx, might it helps. Or probably you soldered bad contact for rx. I made such mistake also, my rx was on gnd :-) It took a while until I found problem ...

But if TV is 5 series, you have to enter another code to unlock console. Might for plasma code is like this also?

1198282
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
juusso
SamyGO Moderator
Posts: 10125
Joined: Sun Mar 07, 2010 6:20 pm

Re: ex-link RS-232 port on PNxxD8000

Post by juusso » Tue Oct 18, 2011 11:49 am

:-P
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[D] Hardware”