SamyGO

hi again!

he tv not recognize the dongle itself.. ue37 D5720, mstar , hacked from wiki .. i have ftp..

but not telnet in the tv ? is normal ?

can somebody help me with remote assistance? teamviwer for example..

You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...

erdem_ua wrote:It depends on "revision". As we said on wiki page...

Hi,

The material arrived today and did not know what was the review of Pen wifi.

I think I was lucky to rev. is B1.

Here's the reference:



So the second I read the wiki samyo (http://wiki.samygo.tv/index.php5/Using_ ... es_with_TV) and were (http://www.wikidevi.com/wiki/D-Link_DWA-140_rev_B1) not have to change anything. In principle, the TV will automatically recognize, confirm?

Best regards,
Jorge

Wiki says exactly " Notice: It's confirmed that HW Rev B1 recognized by C series without change "
Any your post on D series!

You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...
You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...
You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...

Since here is not a support forum and there is no another achievement about this, I delete further messages on this topic about "problems/issues" that repeated for last 20 pages!!!

erdem_ua wrote:Wiki says exactly " Notice: It's confirmed that HW Rev B1 recognized by C series without change "
Any your post on D series!

You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...
You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...
You need to change PID/VID "at your PC". Using Linux OS. Please read wiki...

Since here is not a support forum and there is no another achievement about this, I delete further messages on this topic about "problems/issues" that repeated for last 20 pages!!!

Hi,

I know I have to follow the steps mentioned in the wiki.

I was just here to state my satisfaction.

My problem is that we know anything about linux.

Sorry anything.

Either way I will install linux, and see if I can something.

Best regards,
Jorge

Hello i have chnged PID and VID on Edimax EW-7711uan, TV UE32D5500 recognize wifi dongle as Samsung dongle, but TV does not find any network, so I can not connect to. is here any solution? Very thanks

Hama 00062740 works out of the box. pid / vid 148f:2870.
http://wikidevi.com/wiki/Hama_00062740

Hi guys! please help me..

TV ue37D5700, 1016.0 firmware
I just buy an TP Link WN727N wifi adapter and follow this steps

previosly i changed in config and usb_main_dev.c ...

root@ubuntu:/home/dragos# cd /home/dragos/Desktop/RT5370
root@ubuntu:/home/dragos/Desktop/RT5370# cd os
root@ubuntu:/home/dragos/Desktop/RT5370/os# cd linux
root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# insmod rt5370sta.ko

root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# iwpriv ra0 e2p 208
ra0 e2p:
[0x0208]:0x148F
root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# iwpriv ra0 e2p 20
ra0 e2p:
[0x0020]:0xFFFF
root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# iwpriv ra0 e2p 20
ra0 e2p:
[0x0020]:0xFFFF in tutorial e alcevea
root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# iwpriv ra0 e2p 208=04E8
ra0 e2p:
[0x208]:4E8
root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# iwpriv ra0 e2p 20A=2018
ra0 e2p:
[0x20A]:2018

root@ubuntu:/home/dragos/Desktop/RT5370/os/linux# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04d9:0420 Holtek Semiconductor, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04e8:2018 Samsung Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

TV recognize the wifi adaptor, but no router found on searching.
Sure the is singnal in the room, my diablo wifi work on the same tv..
i worked with RT5370 driver, but the ubuntu recognize adapter after complie like rt2870, maybe it's the problem?

if i do "rmmod rt2870usb.ko and all rt..", ubutu still recognize the adatper and put it again 2870..

Followed instructions on Wiki, finally got Linksys WUSB600N working (using hardware method instructions and Lubuntu VM). Below photos of the dongle:




P.S. when loading compiled kernel module use 2870sta.ko. Dongle works perfectly in 2.4 or 5 GHz mode.

Okey, one more happy user

mark21 wrote:Hi guys! please help me..

TV ue37D5700, 1016.0 firmware
I just buy an TP Link WN727N wifi adapter and follow this steps

previosly i changed in config and usb_main_dev.c ...

root@ubuntu:/home/dragos# cd /home/dragos/Desktop/RT5370

D series require dongles based on rt3572 chip. You can try to change values to 148f:3572 . If no help, then you need driver for your tv, rt5370 and set back default values of your dongles vid/pid. Use rt5370sta driver on ubuntu, it supports chipset 2870.

btw, driver for arm D series avalable here. viewtopic.php?f=25&t=5844