Thanks! I was wondering about D6XXX BogoMIPS (~1200). It seems this is in fact mere Cortex-A9@600Mhz, perhaps with some L2 cache thrown in..inquisitive23 wrote:SAMSUNG HARDWARE 2011
----------------------------------------------
D6000,D6100,D6200...
GENOA-S (Cortex-A9@600Mhz)+Arsenal-WW
D6500...
GENOA-S (Cortex-A9@600Mhz)+Arsenal-WW+Parma
T-GAS*/T-GAP* detailed hardware specs, differences etc.
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
Yet another Samsung D6400/D6500/D6900 training manual: http://elektrotanya.com/samsung_ud6400_ ... nload.html
This one contains some nice details (including Genoa-S block diagram).
But don't trust it too much: many errors, some chapters copied verbatim from B-Series service manuals etc.
Bluetooth module FRAME_SYNC_IN/OUT (3D Sync In/3D Sync Out) signals seems to be connected to Genoa-S UART port. Interesting .
This one contains some nice details (including Genoa-S block diagram).
But don't trust it too much: many errors, some chapters copied verbatim from B-Series service manuals etc.
Bluetooth module FRAME_SYNC_IN/OUT (3D Sync In/3D Sync Out) signals seems to be connected to Genoa-S UART port. Interesting .
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
I also got some pdf...
samsung_ue_d6000_d61xx_d620x_d63xx_ua_training_manual_%5BET%5D.pdf
(have troubles: can`t download previous pdf from http://elektrotanya.com)
samsung_ue_d6000_d61xx_d620x_d63xx_ua_training_manual_%5BET%5D.pdf
(have troubles: can`t download previous pdf from http://elektrotanya.com)
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
http://www.mediafire.com/?3wdd1tyv65r3e1cjuuso wrote:(have troubles: can`t download previous pdf from http://elektrotanya.com)
- erdem_ua
- SamyGO Admin
- Posts: 3125
- Joined: Thu Oct 01, 2009 6:02 am
- Location: Istanbul, Turkey
- Contact:
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
Could we have a shell access with it?sbav1 wrote:Bluetooth module FRAME_SYNC_IN/OUT (3D Sync In/3D Sync Out) signals seems to be connected to Genoa-S UART port. Interesting .
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
Some pics of PDP 8000 main board - http://s64.photobucket.com/albums/h173/ ... Pixelpipe/
There is an unused 8-pin connector at the top of the board, I wonder what it is for? The only equivalent test points I could find for a j-tag adapter like erdem_ua posted is labeled M_NRESET, M_E_GND, M_E_WP, M_E_SCL, M_E_SDA, also one chip (label 05537C) has created a lot of heat discoloration on the front and backside of the board, looks like a bad design and should have a heatsink.
There is an unused 8-pin connector at the top of the board, I wonder what it is for? The only equivalent test points I could find for a j-tag adapter like erdem_ua posted is labeled M_NRESET, M_E_GND, M_E_WP, M_E_SCL, M_E_SDA, also one chip (label 05537C) has created a lot of heat discoloration on the front and backside of the board, looks like a bad design and should have a heatsink.
PN60F8500AFXZA
T-FXPAKUC 1206.3 + SamyGO
"BrickMaster 2015"
T-FXPAKUC 1206.3 + SamyGO
"BrickMaster 2015"
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
In D7000 and D8000 the "built-in" wifi is just a small pcb connected using USB to the mainboard.juuso wrote:Not needed.sbav1 wrote: - D6500 (and up) have built-in wifiI even dont like to watch 3D. IMO not healthy thing. Become headaches after 15min of watching...- 2D -> 3D conversion: basically useless feature, IMO.
Thanks guys for info. I`ll take the D6000 board and install gasdeuc firmware
The pcb is hidden in the screen frame
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
Hmm interesting.. this D8000 service manual seems outdated or plain wrong.
As far as I know the serial port is on pins 4.7 and 11 of the VGA port. In the service manual it talks about a stereo jack but the only jacks present on the mainboard don't seem to have serial connections...
Any clues?
As far as I know the serial port is on pins 4.7 and 11 of the VGA port. In the service manual it talks about a stereo jack but the only jacks present on the mainboard don't seem to have serial connections...
Any clues?
Re: T-GAS*/T-GAP* detailed hardware specs, differences etc.
Yes, I noticed they just copy-pasted this info from B series.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE