Page 1 of 1
Help, I brick my D5500.
Posted: Sun Oct 26, 2014 3:03 pm
by dulehak
I enter in service menu and check micom update (I dont know why touch this) and change from off to wait, tv signal in that moment working but remote control and touch key not working. Unplug from wall and he died, any help?
I try this
Code: Select all
http://wiki.samygo.tv/index.php5/UnBricking_TV_by_EEPROM_Reset#D_Series_SoC_EEPROM_Location
but no help for me. rs232 is on debug.
Thanks in advance.
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 3:19 pm
by juusso
This is very and very bad you ever touched micom update. The answer is here:
http://www.google.com/cse?cx=partner-pu ... gsc.page=1
Apologize, you have to change mainboard.
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 3:25 pm
by dulehak
Ok, where I can find mainboard?
Thanks for fast answer.
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 3:31 pm
by juusso
you can ask for it in local service, or you can buy it on e-bay. You have to know part number which is located direct on the mainboard. Also you can check euroservice2000.abc24.pl. It`s up to you.
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 3:36 pm
by dulehak
Thanks, I try to search.
Best regards.
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 10:06 pm
by dulehak
I forget to ask, can I replace main board with another model, like D7xxx or D8xxx?
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 10:23 pm
by juusso
No. You can not.
Re: Help, I brick my D5500.
Posted: Sun Oct 26, 2014 10:32 pm
by dulehak
I found on ebay BN94-05268G my is BN94-05268A, code BN41-01660B and model BN41-01660 are same. That shoud work with my tv?
Re: Help, I brick my D5500.
Posted: Sat Nov 08, 2014 12:38 am
by dulehak
juuso wrote:No. You can not.
Hello, it's me again with a new question.
I found a working TV UE40D6100 with broken screen, now the question,
Can I get a display of my TV UE40D5500 and repack on D6100?
Thank you.
Re: Help, I brick my D5500.
Posted: Sun Nov 09, 2014 11:29 am
by juusso
I never heard the mainboards of D55xx and D6xxx are cross-compatible. The most problem usually is the different pinout/form/size of connectors on mainboard and lvds module. But in your case power-mainboard-lvds are "as is and you have just know if your LCD display has same connectors to LVDS module. No idea. May be same, may be not. You have to check first if it fits.