[How-To] Alternatives of Samsung WiFi Link Stick
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Will the TP-703N work on the LE40C550 loading modules into tv's kernel?
Does client mode works with ethernet jack? (without using wifi)
Does client mode works with ethernet jack? (without using wifi)
Samsung LE40C530
T-MSX5DEUC-2009.0
T-MSX5DEUC-2009.0
Re: [How-To] Alternatives of Samsung WiFi Link Stick
This is regular Acces Point. You can set it in AP Client mode so it will NAT wifi received signal to ethernet jack or set it in bridge mode so it will route packets from wifi to rj45 jack directly through layer 3. Too bad it is not on Broadcom platform so it will pass stright at layer 2, but for samygo purposes it have no matter. Simply load openwrt set apclient or relayd plug to ethernet jack, grab power from ac adaptor or tv's usb jack and here you go. Remeber that on original firmware you will do nothing unless you learn chinese. OpenWRT will require basci networking knowledge. IMHO better get tl-mr3020 and you can do everything on orignal firmware.
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Ahaaa... I was hoping that this toy could serve me to connect from the usb port of the tv to my switch via rj45 and not depend from wifi.
So what this gadget has to be with wifi link stick alternative?
So what this gadget has to be with wifi link stick alternative?
Samsung LE40C530
T-MSX5DEUC-2009.0
T-MSX5DEUC-2009.0
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Yes, that is what it is exactly. Alternative to wifi stick in usb port. I don't understand what you want to achive. Why don't you just plug EIA/TIA 568A and EIA/TIA 568B crossed cable into switch and rj 45 jack in tv?!
Re: [How-To] Alternatives of Samsung WiFi Link Stick
My TV does not have ethernet card. It has a empty hole in a slot called "common interface".
I would like to achieve wired ethernet connection from the tv to my router (with a crossover cable) , but I only have a usb port. So, if I can connect this gadget to the usb port of the tv, and then my tv detects it as a ethernet card it would be perfect.
Does the tl-mr3020 works on the original samsung firmware? so if I connect the tl-mr3020 to the usb port I can have ethernet connection and (in client mode) wireless if needed some day?
Thanks
I would like to achieve wired ethernet connection from the tv to my router (with a crossover cable) , but I only have a usb port. So, if I can connect this gadget to the usb port of the tv, and then my tv detects it as a ethernet card it would be perfect.
Does the tl-mr3020 works on the original samsung firmware? so if I connect the tl-mr3020 to the usb port I can have ethernet connection and (in client mode) wireless if needed some day?
Thanks
Samsung LE40C530
T-MSX5DEUC-2009.0
T-MSX5DEUC-2009.0
- erdem_ua
- SamyGO Admin
- Posts: 3125
- Joined: Thu Oct 01, 2009 6:02 am
- Location: Istanbul, Turkey
- Contact:
Re: [How-To] Alternatives of Samsung WiFi Link Stick
No it doesn't work on that way. Just grab a WiFi dongle with rt2870 chip inside.
- erdem_ua
- SamyGO Admin
- Posts: 3125
- Joined: Thu Oct 01, 2009 6:02 am
- Location: Istanbul, Turkey
- Contact:
Re: [How-To] Alternatives of Samsung WiFi Link Stick
WoW. You spotted rare rt2870 chip for ~$13!
Unfortunately I couldn't buy it due site doesn't deliver to Turkey.
Thanks.
I will place link into Wiki page.
Unfortunately I couldn't buy it due site doesn't deliver to Turkey.
Thanks.
I will place link into Wiki page.
Re: [How-To] Alternatives of Samsung WiFi Link Stick
This is just for the record.
I didn't have available any Ubuntu 10.04 or other older distribution to compile the source ralink drivers.
So I needed to compile the drivers with Ubuntu 11.10, and Kernel 3.x. The exception being thrown was the following:
The source of the compilation error are the names of two methods in the source code that we renamed in kernel 2.6.35, in order to fix the issue you can manually
rename the method names (which can be prone to errors, has happended to me ) or you can just use the following one liner in the root directory of the source code:
Once applied the patch, perform a 'make clean', and start compilation again.
I hope the information is useful.
Source: http://www.linuxcrew.de/blog/2010/10/11 ... 0/?lang=en
I didn't have available any Ubuntu 10.04 or other older distribution to compile the source ralink drivers.
So I needed to compile the drivers with Ubuntu 11.10, and Kernel 3.x. The exception being thrown was the following:
Code: Select all
~/Downloads/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_mac_usb.c:34:20: note: expected ?VOID **? but argument is of type ?UCHAR **?
cc1: some warnings being treated as errors
make[2]: *** [~/Downloads/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux/../../common/cmm_mac_usb.o] Error 1
make[1]: *** [_module_/~/Downloads/2010_0709_RT2870_Linux_STA_v2.4.0.1/os/linux] Error 2
make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-14-generic'
make: *** [LINUX] Error 2
rename the method names (which can be prone to errors, has happended to me ) or you can just use the following one liner in the root directory of the source code:
Code: Select all
wget -qO- http://www.linuxcrew.de/wp-content/uploads/2010/10/rt2870sta_usb_kernel2635.patch | patch -ul -p0
I hope the information is useful.
Source: http://www.linuxcrew.de/blog/2010/10/11 ... 0/?lang=en
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Just registered to let you know that I bought 3 Edimax EW-7718UN and the hack worked with the three of them. So, it is pretty safe!erdem_ua wrote:WoW. You spotted rare rt2870 chip for ~$13!
Unfortunately I couldn't buy it due site doesn't deliver to Turkey.
Thanks.
I will place link into Wiki page.
I followed the Wiki step by step using Ubuntu 10.04. Also, you have one wrong instruction in the wiki:
Code: Select all
8. Watch lsmod to current PID/VID. Take note that values
And finally, in the step where you check for previously installed kernel modules, you should recommend something like:
Code: Select all
lsmod | grep rt
That's all. Thank you!!