[How-To] Alternatives of Samsung WiFi Link Stick

This forum is for information related with B series hardware instead of firmware/software.

User avatar
erdem_ua
SamyGO Admin
Posts: 3112
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: Alternatives of Samsung WiFi Link Stick

Post by erdem_ua »

injecting to squash FS also will break OS independency. For thoughts on this, I open a topic on General forum. Thanks

hubecker
Posts: 16
Joined: Tue Oct 13, 2009 10:51 pm
Location: Germany

Re: Alternatives of Samsung WiFi Link Stick

Post by hubecker »

Doesn't work for me. Just can post what dmesg says:

Code: Select all

<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 2
<6>usb 2-1: configuration #1 chosen from 1 choice
<6>usb 2-1: USB disconnect, address 2
<1>[SERIAL INPUT MANAGE] Managed tty_struct(.name:ptm1) Setup!!!
<1>[SERIAL INPUT MANAGE] disable_serial : ~~bye(len:5)
<1>[SERIAL INPUT MANAGE] enable_serial : debug(len: 5)
<1>
<6>usbcore: deregistering driver rt2870
<4><--- rtusb 2870 1.001(1.4.0.0) exit
<6>usbcore: deregistering driver rt73
<4><=== rtusb 0.994 exit
<6>usb 2-1: new high speed USB device using ehci-s5h2x and address 3
<6>usb 2-1: configuration #1 chosen from 1 choice
<4>rtusb 2870 1.002(1.4.0.0) [SamyGO] init --->
<7>
<4>
<4>=== pAd = d30a1000, size = 568816 ===
<4>
<4><-- RTMPAllocAdapterBlock, Status=0
<6>usbcore: registered new driver rt2870
Regards

Hubert
TV: UE46ES8090 T-ECPDEUC-2007.0

arris69
Official SamyGO Developer
Posts: 1700
Joined: Fri Oct 02, 2009 8:52 am
Location: Austria/Vienna (no Kangaroos here)
Contact:

Re: Alternatives of Samsung WiFi Link Stick

Post by arris69 »

hubecker wrote:Doesn't work for me. Just can post what dmesg says:

...
Regards

Hubert
output of:

Code: Select all

cat /sys/bus/usb/devices/usb4/subsystem/drivers/rt2870/*/*

Code: Select all

cat /sys/bus/usb/devices/usb4/subsystem/drivers/rt73/*/*
and the usb id of your wifi-dongle would be helpful.

arris

User avatar
erdem_ua
SamyGO Admin
Posts: 3112
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: Alternatives of Samsung WiFi Link Stick

Post by erdem_ua »

kluczus wrote:I have Linksys WUSB54GC and Motorola with dd-wrt, everything is working when I change wifi channel from 13 to 10 or 1. On channel 13 usb cannot find my AP.
How to make changes with modules pernament ?
The problem with 13.th channel is that frequency forbidden for WiFi devices in US but EU. 1-11 channels will work on your devices. I didn't remember 12.th channel but that could be forbidden too.
So if you have problem with 13.th channel, than switch another channel that not used near of you. Channel "number" doesn't effect connection speed if no one use that channel nearby. Scan your location with tools like airodump and find clean channel for your network.
:)

User avatar
erdem_ua
SamyGO Admin
Posts: 3112
Joined: Thu Oct 01, 2009 6:02 am
Location: Istanbul, Turkey
Contact:

Re: Alternatives of Samsung WiFi Link Stick

Post by erdem_ua »

slawekxyz wrote:Hey Guys.

I have a Samsung TV LE40B650 and USB WiFi dongle Edimax EW-7718Un (RT2870 chipset, Vendor = 7392, ProdID = 7718). Is it possible you upgraded rt2870sta.ko file for this device ? I tried to do something myself, but ..... without results.

Thanks and BR.
If I can prepare native compiling toolchain properly, I will :)

jojomail
Posts: 20
Joined: Fri Nov 06, 2009 12:47 am

Re: Alternatives of Samsung WiFi Link Stick

Post by jojomail »

Loading the module rta2870sta.ko (from a usb device) works fine for my dlink dwa-140 dongle but after TV reboot, all changes are lost. How to install the new rta2870sta.ko file to the TV memory ??

Locked

Return to “[B] Hardware”