Page 1 of 1
B530 EEPROM RESET
Posted: Tue Jan 21, 2014 11:38 am
by panos334
I have le32b530p7w model, I was trying to upgrade it to 550 model
i did these steps
1- I entered the service menu (INFO+MENU+MUTE+POWER)
2- I changed the Model Type (as I remember, it didn't have 550 option
and I choosed 650 model)
3- I turned OFF, I turned ON the tv and the tv is dead... only black ...
guys please help me, what should I do...
thanx
Re: B530 EEPROM RESET
Posted: Tue Jan 21, 2014 12:01 pm
by panos334
is this method recommended?
- Disconnect the power cable
- (if you use a CI+ PMCIA card)remove the CI+ module
- Remove all the screws form the back-end (12, I guess)
- Remove the cable on the mainbord (see image down below)
- Plugin the powercable (TV is now on standby)
- Insert the code for getting into the service menu (info+menu+mute+standby)
- the tv starts and the service menu shows up.
- Now carefully connect the the lcd cable back to the main board. (be very careful)
- Voila, here is the service menu back on screen
- Now, recover the model number (eg B530)
- now save, by pressing the power-button (your tv shuts down)
- As in a test turn on the tv and see if its working again.
- Turn of the tv and remove the powercable
- Place the backend together with screws
specialy on this step
- Now carefully connect the the lcd cable back to the main board. (be very careful)
does he means that I connect the cable, in turned on tv?!!
isn't it extremely dangerous for the tv?
Re: B530 EEPROM RESET
Posted: Fri Mar 28, 2014 11:18 pm
by panos334
[SOLVED]
I solved it and I made a video on youtube,
very easy, just with the remote control of the TV.
enjoy Panos method!
https://www.youtube.com/watch?v=W0m5fwouApk