[solved]LT24A550 Wifi Enabled Done

[Her71]

1 Change Wifi Support to Ext-Wifi and AllShare support to ON
2 Change VID PID on a cheap cisco AE1000 usb addapter RT2870
3 install allshare in your laptop

Thats all now we can play media content on our laptop into monitor over wifi

[Enano08]

Sorry for my english.. first of all..

What do you know about it..? I can't do anything usefull yet.. i tried an hour only.. but.. not service ('secret' jaja) menu..


Thanks, just for reading this (english)!!!

[Her71]

my english is bad too, im from Argentina
No se si se puede escribir en castellano aca
Por ahora solo pude habilitar el soporte para wifi y el all shares , aparecen menues nuevos en la tv para configuracion de red y control remoto con smartphones , habilitar el PVR no hace nada , el
problema es que hace falta un adaptador usb wifi original que cuesta una fortuna y no se consigue. El dwa-125 REV A con el cambio de vid pid no sirve asi que estoy atras de uno mas barato que el original con el chip RT3572 que segun la info del las licencias gpl es el driver que tiene instalado este bicho.
Igualmente no es seguro que se pueda navegar en internet ya que no se si trae navegador web
Service menu con la tele apagada Mute + 1 + 8 + 2 + Power on , ojo no jodas con esto por que lo matas
Para mas opciones Apreto 2 veces la tecla 3SPEED , con un control remoto universal
Tambien funciona INFO + FACTORY + 3SPEED 2 veces
si interesa posteo como

[juusso]

no comprendo
eu n?o entendo

sorry.

Use google translator...

[Her71]

no comprendo
eu n?o entendo

sorry.

Use google translator...

OK in english now

POWER OFF + MUTE + 1 + 8 + 2 + POWER ON wait 20 sec FACTORY + 3SPEED
now you are in Service menu go control --> SubOption
NEtwork support to Ext-wifi
PVR support ON
Return
Go to Config option an change All Shares support to on
POWER OFF to save and POWER ON
Also you can gain access to service menu with INFO + FACTORY + 3SPEED twice
Te tv set now has more options in menu like Network configuration , Network remote control

Now i need an USB WIFI dongles , samsung ones are out of stock in my country
I try DWA-125 rev A (RT2870) doing a PID/VID change TV recognize it but cant connect MAC 00.00.00.00.00
In GPL licence screen my tv say RT3572 modules also in MFM_TxxA550_350 gpl souce code
so im searching for an USB DONGLE with that chipset to try it

i do 3SPPED and FACTORY thing with a cheap OFA remote control

as i always say sorry for my english
im only trying to share mi experience

[Her71]

From MFM_TxxA550_350 gpl souce code
rtusb_dev_id.c

#ifdef RT2870
{USB_DEVICE(0x148F,0x2770)}, /* Ralink */
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */
{USB_DEVICE(0x07B8,0x2870)}, /* AboCom */
{USB_DEVICE(0x07B8,0x2770)}, /* AboCom */
{USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom 2770 */
{USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom 2770 */
{USB_DEVICE(0x083A,0x7512)}, /* Arcadyan 2770 */
{USB_DEVICE(0x0789,0x0162)}, /* Logitec 2870 */
{USB_DEVICE(0x0789,0x0163)}, /* Logitec 2870 */
{USB_DEVICE(0x0789,0x0164)}, /* Logitec 2870 */
{USB_DEVICE(0x177f,0x0302)}, /* lsusb */
{USB_DEVICE(0x0B05,0x1731)}, /* Asus */
{USB_DEVICE(0x0B05,0x1732)}, /* Asus */
{USB_DEVICE(0x0B05,0x1742)}, /* Asus */
{USB_DEVICE(0x0DF6,0x0017)}, /* Sitecom */
{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */
{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */
{USB_DEVICE(0x07D1,0x3C11)}, /* D-Link */
{USB_DEVICE(0x14B2,0x3C07)}, /* AL */
{USB_DEVICE(0x050D,0x8053)}, /* Belkin */
{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */
{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */
{USB_DEVICE(0x07AA,0x002F)}, /* Corega */
{USB_DEVICE(0x07AA,0x003C)}, /* Corega */
{USB_DEVICE(0x07AA,0x003F)}, /* Corega */
{USB_DEVICE(0x1044,0x800B)}, /* Gigabyte */
{USB_DEVICE(0x15A9,0x0006)}, /* Sparklan */
{USB_DEVICE(0x083A,0xB522)}, /* SMC */
{USB_DEVICE(0x083A,0xA618)}, /* SMC */
{USB_DEVICE(0x083A,0x8522)}, /* Arcadyan */
{USB_DEVICE(0x083A,0x7522)}, /* Arcadyan */
{USB_DEVICE(0x0CDE,0x0022)}, /* ZCOM */
{USB_DEVICE(0x0586,0x3416)}, /* Zyxel */
{USB_DEVICE(0x0CDE,0x0025)}, /* Zyxel */
{USB_DEVICE(0x1740,0x9701)}, /* EnGenius */
{USB_DEVICE(0x1740,0x9702)}, /* EnGenius */
{USB_DEVICE(0x0471,0x200f)}, /* Philips */
{USB_DEVICE(0x14B2,0x3C25)}, /* Draytek */
{USB_DEVICE(0x13D3,0x3247)}, /* AzureWave */
{USB_DEVICE(0x083A,0x6618)}, /* Accton */
{USB_DEVICE(0x15c5,0x0008)}, /* Amit */
{USB_DEVICE(0x0E66,0x0001)}, /* Hawking */
{USB_DEVICE(0x0E66,0x0003)}, /* Hawking */
{USB_DEVICE(0x129B,0x1828)}, /* Siemens */
{USB_DEVICE(0x157E,0x300E)}, /* U-Media */
{USB_DEVICE(0x050d,0x805c)},
{USB_DEVICE(0x050d,0x815c)},
{USB_DEVICE(0x1482,0x3C09)}, /* Abocom*/
{USB_DEVICE(0x14B2,0x3C09)}, /* Alpha */
{USB_DEVICE(0x04E8,0x2018)}, /* samsung linkstick2 */
{USB_DEVICE(0x1690,0x0740)}, /* Askey */
{USB_DEVICE(0x5A57,0x0280)}, /* Zinwell */
{USB_DEVICE(0x5A57,0x0282)}, /* Zinwell */
{USB_DEVICE(0x7392,0x7718)},
{USB_DEVICE(0x7392,0x7717)},
{USB_DEVICE(0x1737,0x0070)}, /* Linksys WUSB100 */
{USB_DEVICE(0x1737,0x0071)}, /* Linksys WUSB600N */
{USB_DEVICE(0x0411,0x00e8)}, /* Buffalo WLI-UC-G300N*/
{USB_DEVICE(0x050d,0x815c)}, /* Belkin F5D8053 */
{USB_DEVICE(0x100D,0x9031)}, /* Motorola 2770 */
{USB_DEVICE(0x0DB0,0x6899)},
#endif // RT2870 //
#ifdef RT35xx
{USB_DEVICE(0x148F,0x3572)}, /* Ralink 3572 */
{USB_DEVICE(0x1740,0x9801)}, /* EnGenius 3572 */
{USB_DEVICE(0x0DF6,0x0041)}, /* Sitecom 3572 */
{USB_DEVICE(0x0DF6,0x0042)},
{USB_DEVICE(0x04BB,0x0944)}, /* I-O DATA 3572 */
{USB_DEVICE(0x1690,0x0740)}, /* 3572 */
{USB_DEVICE(0x1690,0x0744)}, /* 3572 */
{USB_DEVICE(0x5A57,0x0284)}, /* Zinwell 3572 */
{USB_DEVICE(0x167B,0x4001)}, /* 3572 */
{USB_DEVICE(0x0930,0x0A07)}, /* TOSHIBA */
#endif // RT35xx //
#else
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */
{USB_DEVICE(0x14b2,0x3c09)}, /* Ralink */
{USB_DEVICE(0x04E8,0x2018)}, /* Link Stick 2(09year sold) */

{USB_DEVICE(0x148F,0x3572)}, /* Ralink 3572, 2009 BD & HTS only */
{USB_DEVICE(0x04E8,0x2032)}, /* Reserved */
{USB_DEVICE(0x1690,0x0740)}, /* For askey module test */
{USB_DEVICE(0x1690,0x0744)}, /* For askey module test */
#endif // RT35xx //
{ }/* Terminating entry */
};

conclusion its an RT2870 or RT3572 in make file says CHIP=3572 but i go for a cheaper 2870 first

[Enano08]

POWER OFF + MUTE + 1 + 8 + 2 + POWER ON wait 20 sec FACTORY + 3SPEED
now you are in Service menu go control --> SubOption
NEtwork support to Ext-wifi
PVR support ON
Return
Go to Config option an change All Shares support to on
POWER OFF to save and POWER ON

I'm still looking for the extended menu, with the Samg. remote control.. but nothing.

Something wonderfull would be a SamyGo on our TVs..

[littleblue]

Hi Her71.

Thank you for your post, it is so helpful.
can you explain how to send Factory , and 3SPEED to the TV ?
What type of remote are u using, can you please share with us ?

Thanks.

[Her71]

Hi Her71.

Thank you for your post, it is so helpful.
can you explain how to send Factory , and 3SPEED to the TV ?
What type of remote are u using, can you please share with us ?

Thanks.

1 - One For All remote URC-7320 or similar

2 - Press magic key 3 sec then enter 0812
Press magic key 3 sec then enter 994 + magic key + 00020 + red key ( now red key is 3SPEED )
Press magic key 3 sec then enter 994 + magic key + 00027 + green key ( now green key is FACTORY )

with tv turned on press info in tv original remote and green key in ofa remote and thats all

[Her71]

Advanced and expert otption on service menu still locked 0000 do nothing
im working on a serial cable with a usb to ttl converter

sorry for my english