Re: Record TV over USB
Posted: Thu Aug 04, 2011 8:52 pm
I have LE40B679 which is CI+ with additional satellite tuner, but i guess it does not make any difference.
My CAM is Neotion Conax CAS-7 for N-tv - polish provider.
Try to play with writing values to mentioned above mem area. As sbav1 wrote, we have actual video pid @ 0x30110100 byte (or byte+half-byte?), so it will vary with every channel. Try to figure out what exactly kills the signal. You cannot change last three characters, becouse they store PID. Try to:
-Set TV to some FTA channel with CAM inserted
-Read @ 0x30110100 value
-try to modify value by eating it's left part, but do not change last four characters
For example, if you get 0x141A0A1, try 0x41A0A1.
If signal die, try reboot, then set to same channel and try 0x1A0A1.
If still no success, then probably we have totally diferent CAM's and i have luck that mine works
My CAM is Neotion Conax CAS-7 for N-tv - polish provider.
Try to play with writing values to mentioned above mem area. As sbav1 wrote, we have actual video pid @ 0x30110100 byte (or byte+half-byte?), so it will vary with every channel. Try to figure out what exactly kills the signal. You cannot change last three characters, becouse they store PID. Try to:
-Set TV to some FTA channel with CAM inserted
-Read @ 0x30110100 value
-try to modify value by eating it's left part, but do not change last four characters
For example, if you get 0x141A0A1, try 0x41A0A1.
If signal die, try reboot, then set to same channel and try 0x1A0A1.
If still no success, then probably we have totally diferent CAM's and i have luck that mine works