ue32b6000 wrong setting service menu, won't start up

Here for general support for B series TVs, request and problem solve area.
Post Reply

immoreel
Posts: 3
Joined: Sat Jan 26, 2013 12:17 pm

ue32b6000 wrong setting service menu, won't start up

Post by immoreel » Sat Jan 26, 2013 1:59 pm

Hey hi,

I wanted to turn off the buttons on the bezel (little kid in the house keeps turning off the tv), found somewhere online that it would be possible to do that by going into the service menu and putting the tv in hotel mode and turn it off there. Accidentally i think i also changed the tuner type and now it won't start up.

Its starts, the screen turns on for a second and then it quits and starts over. so it's in loop.

I haven't done any of this:
1. Have you installed the proper u-boot and kernel with network supporting?

2. Have you set rs232 to debug? Watchdog off?

3. Do you have an exlink cable? What is the output?
I have, however, tried resetting the eeprom as mentioned here: viewtopic.php?f=4&t=3744
It didn't help, still won't start up...:(

Can anybody give me some advice, or should I start saving for a new tv?
Thanks,
--
Immo

User avatar
juusso
SamyGO Moderator
Posts: 10098
Joined: Sun Mar 07, 2010 6:20 pm

Re: ue32b6000 wrong setting service menu, won't start up

Post by juusso » Sat Jan 26, 2013 2:06 pm

this should help if you do according instructions
makeshiftam wrote:Great news, the eeprom reset worked. Managed to find the wiring diagram for the chip, it took a couple of attempts but its now up and running! :P

I've put together a picture and diagram showing it.
SpoilerShow
Image
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

immoreel
Posts: 3
Joined: Sat Jan 26, 2013 12:17 pm

Re: ue32b6000 wrong setting service menu, won't start up

Post by immoreel » Sat Jan 26, 2013 2:30 pm

Like i said, we tried that and it didnt work...

Any other suggestions?

User avatar
juusso
SamyGO Moderator
Posts: 10098
Joined: Sun Mar 07, 2010 6:20 pm

Re: ue32b6000 wrong setting service menu, won't start up

Post by juusso » Sat Jan 26, 2013 2:32 pm

buy another mainboard. You can take one from B650 and get your TV slightly upgraded for ~100USD
just you need to do small investigation on mainboards, we have success on upgrading B550->B650.
Your TV is LED TV(?) and probably sizes/connector places on back pannel or so on are different. Anyway, you`ve got an idea ;)

I don`t know any other way for unbricking except those you`ve seen on wiki.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

immoreel
Posts: 3
Joined: Sat Jan 26, 2013 12:17 pm

Re: ue32b6000 wrong setting service menu, won't start up

Post by immoreel » Sat Jan 26, 2013 2:39 pm

Thanks, do you know where i can buy a new board?

User avatar
juusso
SamyGO Moderator
Posts: 10098
Joined: Sun Mar 07, 2010 6:20 pm

Re: ue32b6000 wrong setting service menu, won't start up

Post by juusso » Sat Jan 26, 2013 2:44 pm

ebay, http://euroservice2000.abc24.pl/ and so on. Input mainboard number you`re looking for and you get it. You can also ask on your local samsung repair centre. If you want cheaper, you can get second hand mainoard.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

Post Reply

Return to “[B] Support”