UE55ES8090 Service menu

Here for general support for E series TVs, request and problem solve area.
Post Reply

noahjoseph
SamyGO Project Donor
Posts: 43
Joined: Thu Oct 29, 2015 4:11 pm

UE55ES8090 Service menu

Post by noahjoseph » Fri Jun 16, 2017 8:09 pm

Can someone Share the Service menu values for ue55es8090? :D

User avatar
juusso
SamyGO Moderator
Posts: 9562
Joined: Sun Mar 07, 2010 6:20 pm

Re: UE55ES8090 Service menu

Post by juusso » Sun Jun 18, 2017 8:31 am

zoelechat wrote:
Tue Dec 08, 2015 12:34 am
http://ctrlv.it/arm/3293/3158348506
UE40ES8000, T-ECPDEUC-2003.4
It`s for 40inch, but same goes for 55inch as well.
LE40B653T5W,UE40D6750
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series, exeDSP/exeTV patches[C/D/E/F/H]

DO NOT EVER INSTALL FIRMWARE UPGRADE

User avatar
fluffi444
SamyGO Project Donor
Posts: 543
Joined: Fri Apr 05, 2013 9:55 pm
Location: Germany

Re: UE55ES8090 Service menu

Post by fluffi444 » Sun Jun 18, 2017 7:52 pm

I told him this already via pm. He asked me. But now it looks like he's searching for replacement Mainboard...

Those a my settings from factory tool
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2003.4 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC

noahjoseph
SamyGO Project Donor
Posts: 43
Joined: Thu Oct 29, 2015 4:11 pm

Re: UE55ES8090 Service menu

Post by noahjoseph » Mon Jun 19, 2017 2:35 pm

Will try to take most of settings


User avatar
fluffi444
SamyGO Project Donor
Posts: 543
Joined: Fri Apr 05, 2013 9:55 pm
Location: Germany

Re: UE55ES8090 Service menu

Post by fluffi444 » Mon Jun 19, 2017 5:50 pm

Please report if eprom reset works for you.
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2003.4 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC

noahjoseph
SamyGO Project Donor
Posts: 43
Joined: Thu Oct 29, 2015 4:11 pm

Re: UE55ES8090 Service menu

Post by noahjoseph » Tue Jun 20, 2017 11:53 am

Cant reset my eeprom. When i stick the two pins, tv will turn off allways. When i release the pins then tv will start normally...


User avatar
fluffi444
SamyGO Project Donor
Posts: 543
Joined: Fri Apr 05, 2013 9:55 pm
Location: Germany

Re: UE55ES8090 Service menu

Post by fluffi444 » Tue Jun 20, 2017 2:47 pm

I guess it's not correct. If I'm not wrong connect first, then press power button for longer time .... Please read wiki again....
Maybe you need a third hand for this

From wiki:
Join VCC and SDA, power on TV and hold about for 20 seconds with the TV powered. It just try to read (wrong) settings from EEPROM, since it cannot read anything (refer to the warning message bellow), just start with defaults. That is what we want. Than releasing SDA line and shutting TV off will update the settings on EEPROM with null values, that TV could boot with it. After all, you can enter service menu and change the required changes.
TV: UE40ES7000 @ UE40ES8090 - T-ECPDEUC-2003.4 // SamyGO
CI+: Unicam EVO 4 with HD+ (HD02) @ Pacific 4.60
NET: Samba: PC

noahjoseph
SamyGO Project Donor
Posts: 43
Joined: Thu Oct 29, 2015 4:11 pm

Re: UE55ES8090 Service menu

Post by noahjoseph » Wed Jun 21, 2017 6:02 am

Yes i did it like this but i didnt get any messages with warning or something like that. When i press the both pins and turning tv on, tv will turn off several times

Post Reply

Return to “[E] Support”

Who is online

Users browsing this forum: No registered users and 1 guest