rs232 control

Here for general support for E series TVs, request and problem solve area.
Post Reply

thof
Posts: 1
Joined: Thu Feb 14, 2013 4:12 pm

rs232 control

Post by thof »

Hi All!

I have a EH5000 television that I want to control using the rs232 jack plug. I have made myself a cable and when setting the rs232 jack settings to debug I'm able to start a serial connection with baud rate 115200.

Now the screen stays blank afterwards and from the wiki I am able to get into the top debug menu by sending 1198282 and after that sending 20089999.

So the communication works, but now I want to be able to send commands for changing source and commands for power on/off.

What would these commands be and where do I enter them?

I was thinking they should be somewhat in line with starting the top menu, but I have tried several number combinations, but none seem to work!

Thanks!

E3V3A
Posts: 247
Joined: Wed Oct 31, 2012 2:31 am
Location: /dev/zero

Re: rs232 control

Post by E3V3A »

It's all on the Wiki!
HW: UE40ES5700SXXH
FW: T-MST10PDEUC-1029.0 Onboot: 1003

Post Reply

Return to “[E] Support”