[App] libSambilight E/F/H (MST-only)

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

tasshack
SamyGO Project Donor
Posts: 52
Joined: Thu Aug 23, 2018 5:54 am
Location: Istanbul, TURKEY

Re: [App] libSambilight E/F/H (MST-only)

Post by tasshack »

brunogts77 wrote:
Thu Apr 14, 2022 8:07 am
I've already tested the LED's with Hyperion and it doesn't work....
If your hardware doesn't work with hyperion, how can you expect it to work with sambilight?
Hardware setup is not the scope of this library. You should check for tutorials about how to connect your leds to arduino and work with hyperion.

User avatar
brunogts77
Posts: 726
Joined: Sat Feb 18, 2012 8:34 pm

Re: [App] libSambilight E/F/H (MST-only)

Post by brunogts77 »

Doesnt work 😣, any sugestion?
UE42F5570 T-MST12DEUC_1119] [OTN=OFF] [OSCAM=ON]
UE48H6500 T-MST14DEUC-2130.1 [OTN=OFF] [OSCAM=ON]
UE43KU6079 T-JZL6DEUC-1242.0

fromul
SamyGO Project Donor
Posts: 39
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

brunogts77 wrote:
Mon Apr 18, 2022 7:01 pm
Doesnt work 😣, any sugestion?
1) which type of arduino are you using? ....you used the attached sketch, or wrote your own?
2) on which TV...UE42F5570?
3) which type of LED you using? ...WS2812B or other?
UE46ES6800 T-MST10DEUC 2010.0 rooted, OSCam r11704, "semi"-Sambilight (GFX_LIB=1 not working with E series)

User avatar
brunogts77
Posts: 726
Joined: Sat Feb 18, 2012 8:34 pm

Re: [App] libSambilight E/F/H (MST-only)

Post by brunogts77 »

Hi, I have an Arduino pro micro, I'm using the attached sketch, I'm using my H-series TV and the LED's used are the ws2812b.
UE42F5570 T-MST12DEUC_1119] [OTN=OFF] [OSCAM=ON]
UE48H6500 T-MST14DEUC-2130.1 [OTN=OFF] [OSCAM=ON]
UE43KU6079 T-JZL6DEUC-1242.0

fromul
SamyGO Project Donor
Posts: 39
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

brunogts77 wrote:
Mon Apr 18, 2022 10:10 pm
Hi, I have an Arduino pro micro, I'm using the attached sketch, I'm using my H-series TV and the LED's used are the ws2812b.
Ok, have you same count of LED´s in Arduino sketch (example my value is 182) and same in file 01_99_Sambilight.init (example my values H_LEDS=59, V_LEDS=32) ? And correct setting of other parameters (again in file 01_99_Sambilight.init):
BOTTOM_GAP=0 (if your stripe begin from bottom TV side)
START_OFFSET=150 (if your stripe begin from bottom right TV side...view of the back power connector)
CLOCKWISE=0 (if your stripe begin from bottom right TV side)

Check it...
UE46ES6800 T-MST10DEUC 2010.0 rooted, OSCam r11704, "semi"-Sambilight (GFX_LIB=1 not working with E series)

Post Reply

Return to “[F] Software”