[App] libSambilight E/F/H (MST-only)
Re: [App] libSambilight E/F/H (MST-only)
So I might have flashed all successfully.
ENDLog from oneshot
[Sambilight] Serial opened /dev/ttyUSB0 @921600
[Sambilight] Grabbing started
[Sambilight] Sambilight ended
[Sambilight] lib_deinit
But like u mentioned it only save a Black screen due to Image capture broken.
Would it be possible to get an arduino sketch files with also wifi Support like fastled when TV is not on or to test if LEDs are working
ENDLog from oneshot
[Sambilight] Serial opened /dev/ttyUSB0 @921600
[Sambilight] Grabbing started
[Sambilight] Sambilight ended
[Sambilight] lib_deinit
But like u mentioned it only save a Black screen due to Image capture broken.
Would it be possible to get an arduino sketch files with also wifi Support like fastled when TV is not on or to test if LEDs are working
Re: [App] libSambilight E/F/H (MST-only)
New version released for fixes on H. Unfortunately TV Remote feature is currently not supported on H, you need to set TV_REMOTE=0; on init file to make it work.
Also testing is a bit different from E/F. You need to call two commands for pattern rendering and capturing for testing.
Also testing is a bit different from E/F. You need to call two commands for pattern rendering and capturing for testing.
Re: [App] libSambilight E/F/H (MST-only)
Hi.
Testpattern is working
But second command I got error samyGOso: invalid option -- 'H'
/mnt #
/mnt # samyGOso -d -H -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS
:35 V_LEDS:19 BOTTOM_GAP:7 START_OFFSET:68 CLOCKWISE:1 CAPTURE_POS:0 COLOR_ORDER
:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:0 TEST_PROFILE:0 TEST_SAVE_CAPTU
RE:1
samyGOso v1.2.5 (c) bugficks 2013-2014, sectroyer 2014-2015
samyGOso: invalid option -- 'H'
usage: samyGOso [-p PID | -n procname | -A | -T | -D ] [-B ] {-c CONFIG | -l /full/path/to/inject.so [-r (=resident)]} [-d (=debug on)] [-a (=add libc addressoffset )] [arg0,...,argN]
/mnt #
Testpattern is working
SpoilerShow
/mnt #
/mnt # samyGOso -d -H -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS
:35 V_LEDS:19 BOTTOM_GAP:7 START_OFFSET:68 CLOCKWISE:1 CAPTURE_POS:0 COLOR_ORDER
:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:0 TEST_PROFILE:0 TEST_SAVE_CAPTU
RE:1
samyGOso v1.2.5 (c) bugficks 2013-2014, sectroyer 2014-2015
samyGOso: invalid option -- 'H'
usage: samyGOso [-p PID | -n procname | -A | -T | -D ] [-B ] {-c CONFIG | -l /full/path/to/inject.so [-r (=resident)]} [-d (=debug on)] [-a (=add libc addressoffset )] [arg0,...,argN]
/mnt #
Re: [App] libSambilight E/F/H (MST-only)
Sorry it's my bad. It should beschybiorz wrote: ↑Wed Dec 01, 2021 9:07 pm Hi.
Testpattern is working
But second command I got error samyGOso: invalid option -- 'H'SpoilerShow
/mnt #
/mnt # samyGOso -d -H -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS
:35 V_LEDS:19 BOTTOM_GAP:7 START_OFFSET:68 CLOCKWISE:1 CAPTURE_POS:0 COLOR_ORDER
:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:0 TEST_PROFILE:0 TEST_SAVE_CAPTU
RE:1
samyGOso v1.2.5 (c) bugficks 2013-2014, sectroyer 2014-2015
samyGOso: invalid option -- 'H'
usage: samyGOso [-p PID | -n procname | -A | -T | -D ] [-B ] {-c CONFIG | -l /full/path/to/inject.so [-r (=resident)]} [-d (=debug on)] [-a (=add libc addressoffset )] [arg0,...,argN]
/mnt #
Code: Select all
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:35 V_LEDS:19 BOTTOM_GAP:7 START_OFFSET:68 CLOCKWISE:1 CAPTURE_POS:0 COLOR_ORDER:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:0 TEST_PROFILE:0 TEST_SAVE_CAPTURE:1
Re: [App] libSambilight E/F/H (MST-only)
Yes.
Screenshot is now also saved but led,s won't work. Will look after them tomorrow or at the weekend.
Screenshot is now also saved but led,s won't work. Will look after them tomorrow or at the weekend.
Re: [App] libSambilight E/F/H (MST-only)
Yes but none of them light up.
Old setup esp8266 with eftdi serial adapter 3,3v jumper
I now have the arduino micro pro connected via USB and only connected data line also to pin 14 from led stripe. Rest of stripe is powered via ac adapter.
Maybe I've setup something wrong in arduino, but I don't think so.
The info files are the same for both setups correct?
Sry when I ask to much.
Also I have ws2812b led stripe. Also changed pin to pwm pin but none is lightning
My setup of led mount is:
Left/right each 24 led
Top 48
Bottom none.
Offset 24 and grb
Mount counter CLOCKWISE. Starts down Front right side.
Old setup esp8266 with eftdi serial adapter 3,3v jumper
I now have the arduino micro pro connected via USB and only connected data line also to pin 14 from led stripe. Rest of stripe is powered via ac adapter.
Maybe I've setup something wrong in arduino, but I don't think so.
The info files are the same for both setups correct?
Sry when I ask to much.
Also I have ws2812b led stripe. Also changed pin to pwm pin but none is lightning
My setup of led mount is:
Left/right each 24 led
Top 48
Bottom none.
Offset 24 and grb
Mount counter CLOCKWISE. Starts down Front right side.
Re: [App] libSambilight E/F/H (MST-only)
Ok. Seems that my led stripe is broken or something is wrong there. Flashed back another arduino sketch but none led wont light up. Will have to look into it the other days.
Re: [App] libSambilight E/F/H (MST-only)
Ok. I managed to repair my stripe. First led Was broken. Now wled and mclightning are working. Will test later your in sketch and report.
So ino sketch works. Led came up to live.
Colors don't match all testpattern fields or is it because of the reduced img size in post prozess?
Will try livepicture later.
So ino sketch works. Led came up to live.
Colors don't match all testpattern fields or is it because of the reduced img size in post prozess?
Will try livepicture later.
Re: [App] libSambilight E/F/H (MST-only)
Thanks you for Super support.
Now it is working. All I had to do was also to connect ground from led strip to arduino pro micro.
Now all is working like it should.
Some minor colour dispatch (gamma) lightblue seems like turkies
But it's a new dimension of looking TV.
I'm happy.
Now it is working. All I had to do was also to connect ground from led strip to arduino pro micro.
Now all is working like it should.
Some minor colour dispatch (gamma) lightblue seems like turkies
But it's a new dimension of looking TV.
I'm happy.