[App] libSambilight E/F/H (MST-only)

Here are software that related with Samsung F series TVs.
Please don't create any new topic here unless you have software to post/release.

tasshack
SamyGO Project Donor
Posts: 65
Joined: Thu Aug 23, 2018 5:54 am
Location: Istanbul, TURKEY

Re: [App] libSambilight E/F/H (MST-only)

Post by tasshack »

fromul wrote: Sun Feb 13, 2022 8:45 pm i maked steps:
- I've copied libSambilight.so and libSambilight.config to /mnt/opt/privateer/usr/libso
- I've copied 01_99_Sambilight.init to /mnt/etc/init.d/
- I've set file permissions with chmod

but i don´t have a Sambilight.log in /dtv/
...only libOscamE_T-MST.log

...Sambilight.log was created after manually testing (but with disconnected NodeMCU and FTDI):
VDLinux#> samyGOso -d -A -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_L
EDS:35 V_LEDS:19 BOTTOM_GAP:7 START_OFFSET:68 CLOCKWISE:1 CAPTURE_POS:0 COLOR_OR
DER:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:1 TEST_PROFILE:0 TEST_SAVE_CA
PTURE:1
samyGOso v1.2.5 (c) bugficks 2013-2014, sectroyer 2014-2015
Injecting '/mnt/opt/privateer/usr/libso/libSambilight.so' resident: '0'
mprotect: 0x42379c80
dlopen: 0x428f8b28
dlclose: 0x428f8ccc
dlsymaddr: 0x428f8d1c
pc=428234dc lr=428234c8 sp=be976ef8 fp=72d2f5c
r0=fffffe00 r1=80
r2=1 r3=0
stack: 0xbe95a000-0xbe97b000 length = 135168
executing injection code at 0xbe976cdc
library injection completed!
Succeeded.
VDLinux#>


...i try it again to morrow
Can you share the log file after you start the library.
fromul
SamyGO Project Donor
Posts: 47
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

yes, here is it, manually runned with command (autostart with 01_99_Sambilight.init in mnt/etc/init.d/ folder not working):
samyGOso -d -A -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:59 V_LEDS:32 BOTTOM_GAP:0 START_OFFSET:143 CLOCKWISE:0 CAPTURE_POS:0 COLOR_ORDER:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:1 TEST_PROFILE:0 TEST_SAVE_CAPTURE:1

Code: Select all

[Sambilight] SamyGO E/F/H libSambilight v1.2.11 - (c) tasshack 2019 - 2021
[Sambilight] _Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t [0xf38d30].
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t12SdMainChip_k' failed.
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP24SdVideoCommonFrameData_tP8SdRect_t12SdMainChip_k' failed.
[Sambilight] _Znwj [0xf3fc04].
[Sambilight] _ZN4SCGCC2El [0x1c40608].
[Sambilight] _ZN8SCBaseGC6CreateEv [0x1c4c540].
[Sambilight] _ZN4SCGC7DestroyEv [0x1c403cc].
[Sambilight] _ZN4SCGCD2Ev [0x1c4065c].
[Sambilight] _ZN4SCGC5ClearEPN6Shadow9BasicType4RectE [0x1c40ff4].
[Sambilight] _ZN8SCBaseGC5FlushEPN6Shadow9BasicType4RectE [0x1c4bc54].
[Sambilight] _ZN4SCGC8FillRectEN6Shadow5ColorEllll [0x1c4b528].
[Sambilight] _ZN4SCGC8DrawTextEllPtl [0x1c3cc7c].
[Sambilight] _ZN4SCGC11SetFontSizeEl [0x1c3d2dc].
[Sambilight] _ZN4SCGC7SetFontEP6SCFont [0x1c3c0dc].
[Sambilight] _ZN4SCGC12SetFontStyleEl [0x1c3ba8c].
[Sambilight] _ZN4SCGC10SetFgColorEN6Shadow5ColorE [0x3836a14].
[Sambilight] _ZN14CUSBAppResUtil14GetDefaultFontEv [0x256ca08].
[Sambilight] g_IPanel [0x420397a0].
[Sambilight] dlsym 'g_TaskManager' failed.
[Sambilight] g_pTaskManager [0x7302e54].
[Sambilight] g_TVViewerMgr [0x730deb8].
[Sambilight] dlsym 'g_pTVViewerMgr' failed.
[Sambilight] g_TVViewerWStringEng [0x719f928].
[Sambilight] dlsym 'g_WarningWStringEng' failed.
[Sambilight] dlsym 'g_pCustomTextResMgr' failed.
[Sambilight] dlsym 'g_CustomTextWStringEng' failed.
[Sambilight] _ZN16CResourceManager10GetWStringEi [0x150e41c].
[Sambilight] _ZN9PCWString7ConvertEPtPKciiPi [0xf419a8].
[Sambilight] _ZN12CTaskManager14GetApplicationE15DTV_APPLICATION [0x150fd84].
[Sambilight] _ZN10CViewerApp16GetViewerManagerEv [0x1980840].
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager11GetInstanceENS_13EDesktopIndexE' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager14GetApplicationEPKcS2_' failed.
[Sambilight] _ZN14CViewerManager15ShowSystemAlertEii [0x19c916c].
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEi' failed.
[Sambilight] _ZN14CViewerManager14ShowCustomTextEi [0x19c608c].
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEib' failed.
[Sambilight] dlsym '_ZN14CViewerManager10ShowRCModeEi' failed.
[Sambilight] dlsym '_ZN14CCustomTextApp13t_OnActivatedEPKci' failed.
[Sambilight] MsOS_PA2KSEG0 [0x41df6afc].
[Sambilight] MsOS_Dcache_Flush [0x41df6b2c].
[Sambilight] MApi_MMAP_GetInfo [0x41db9b24].
[Sambilight] MApi_XC_W2BYTEMSK [0x41ee7d64].
[Sambilight] gfx_InitNonGAPlane [0x41dcc1a8].
[Sambilight] gfx_ReleasePlane [0x41dd361c].
[Sambilight] gfx_CaptureFrame [0x41dc789c].
[Sambilight] gfx_BitBltScale [0x41dcdf2c].
[Sambilight] MApi_GOP_DWIN_CaptureOneFrame [0x41e10680].
[Sambilight] MApi_GOP_DWIN_GetWinProperty [0x41e0fe0c].
[Sambilight] Sambilight started
[Sambilight] H_LEDS: 59, V_LEDS: 32, BOTTOM_GAP: 0, START_OFFSET: 143, COLOR_ORDER: RGB, CAPTURE_POS: 0, CLOCKWISE: 0
[Sambilight] 480x270 30ms
[Sambilight] Black border detection enabled
[Sambilight] -------------1-------------
[Sambilight] Name: 16:9
[Sambilight] Saturation Gain: 130%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 26%
[Sambilight] Vertical Depth: 15%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------2-------------
[Sambilight] Name: 21:9
[Sambilight] Saturation Gain: 120%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 15%
[Sambilight] Vertical Depth: 7%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 12%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------3-------------
[Sambilight] Name: 4:3
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 12%
[Sambilight] -------------4-------------
[Sambilight] Name: 3:2
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 8%
[Sambilight] 4 Profile(s) Loaded From Config
[Sambilight] Serial available /dev/ttyUSB0 @921600
[Sambilight] Serial open
[Sambilight] Led manager init
[Sambilight] Panel size 1920x1080
[Sambilight] gfx_lib not enabled
[Sambilight] Test Started
[Sambilight] Render test pattern
[Sambilight] Grabbing started
[Sambilight] Capture saved to /dtv/Sambilight.bmp
[Sambilight] Sambilight ended
[Sambilight] lib_deinit
UE46H7000 T-MST14DEUC 2130.0 rooted, OSCam r11704, Sambilight preparation in progress
fromul
SamyGO Project Donor
Posts: 47
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

Today i tried manually run command from 01_99_Sambilight.init:

samyGOso -A -B -r -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:59 V_LEDS:32 BOTTOM_GAP:0 START_OFFSET:143 BAUDRATE:921600 CLOCKWISE:0 COLOR_ORDER:RGB CAPTURE_POS:0 BLACK_BORDER:1 CAPTURE_FREQ:30 TV_REMOTE:1 EXTERNAL:0 CAPTURE_SIZE:5 OSD_CAPTURE:1 GFX_LIB:1 TEST_FRAMES:0 TEST_PROFILE:0 TEST_PATTERN:0 TEST_SAVE_CAPTURE:0

but after few second got restart

log here:

Code: Select all

[Sambilight] SamyGO E/F/H libSambilight v1.2.11 - (c) tasshack 2019 - 2021
[Sambilight] _Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t [0xf38d30].
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t12SdMainChip_k' failed.
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP24SdVideoCommonFrameData_tP8SdRect_t12SdMainChip_k' failed.
[Sambilight] _Znwj [0xf3fc04].
[Sambilight] _ZN4SCGCC2El [0x1c40608].
[Sambilight] _ZN8SCBaseGC6CreateEv [0x1c4c540].
[Sambilight] _ZN4SCGC7DestroyEv [0x1c403cc].
[Sambilight] _ZN4SCGCD2Ev [0x1c4065c].
[Sambilight] _ZN4SCGC5ClearEPN6Shadow9BasicType4RectE [0x1c40ff4].
[Sambilight] _ZN8SCBaseGC5FlushEPN6Shadow9BasicType4RectE [0x1c4bc54].
[Sambilight] _ZN4SCGC8FillRectEN6Shadow5ColorEllll [0x1c4b528].
[Sambilight] _ZN4SCGC8DrawTextEllPtl [0x1c3cc7c].
[Sambilight] _ZN4SCGC11SetFontSizeEl [0x1c3d2dc].
[Sambilight] _ZN4SCGC7SetFontEP6SCFont [0x1c3c0dc].
[Sambilight] _ZN4SCGC12SetFontStyleEl [0x1c3ba8c].
[Sambilight] _ZN4SCGC10SetFgColorEN6Shadow5ColorE [0x3836a14].
[Sambilight] _ZN14CUSBAppResUtil14GetDefaultFontEv [0x256ca08].
[Sambilight] g_IPanel [0x420397a0].
[Sambilight] dlsym 'g_TaskManager' failed.
[Sambilight] g_pTaskManager [0x7302e54].
[Sambilight] g_TVViewerMgr [0x730deb8].
[Sambilight] dlsym 'g_pTVViewerMgr' failed.
[Sambilight] g_TVViewerWStringEng [0x719f928].
[Sambilight] dlsym 'g_WarningWStringEng' failed.
[Sambilight] dlsym 'g_pCustomTextResMgr' failed.
[Sambilight] dlsym 'g_CustomTextWStringEng' failed.
[Sambilight] _ZN16CResourceManager10GetWStringEi [0x150e41c].
[Sambilight] _ZN9PCWString7ConvertEPtPKciiPi [0xf419a8].
[Sambilight] _ZN12CTaskManager14GetApplicationE15DTV_APPLICATION [0x150fd84].
[Sambilight] _ZN10CViewerApp16GetViewerManagerEv [0x1980840].
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager11GetInstanceENS_13EDesktopIndexE' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager14GetApplicationEPKcS2_' failed.
[Sambilight] _ZN14CViewerManager15ShowSystemAlertEii [0x19c916c].
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEi' failed.
[Sambilight] _ZN14CViewerManager14ShowCustomTextEi [0x19c608c].
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEib' failed.
[Sambilight] dlsym '_ZN14CViewerManager10ShowRCModeEi' failed.
[Sambilight] dlsym '_ZN14CCustomTextApp13t_OnActivatedEPKci' failed.
[Sambilight] MsOS_PA2KSEG0 [0x41df6afc].
[Sambilight] MsOS_Dcache_Flush [0x41df6b2c].
[Sambilight] MApi_MMAP_GetInfo [0x41db9b24].
[Sambilight] MApi_XC_W2BYTEMSK [0x41ee7d64].
[Sambilight] gfx_InitNonGAPlane [0x41dcc1a8].
[Sambilight] gfx_ReleasePlane [0x41dd361c].
[Sambilight] gfx_CaptureFrame [0x41dc789c].
[Sambilight] gfx_BitBltScale [0x41dcdf2c].
[Sambilight] MApi_GOP_DWIN_CaptureOneFrame [0x41e10680].
[Sambilight] MApi_GOP_DWIN_GetWinProperty [0x41e0fe0c].
[Sambilight] _ZN10CViewerApp14t_OnInputOccurEPK7PTEvent [0x1996b04].
[Sambilight] Sambilight started
[Sambilight] H_LEDS: 59, V_LEDS: 32, BOTTOM_GAP: 0, START_OFFSET: 143, COLOR_ORDER: RGB, CAPTURE_POS: 0, CLOCKWISE: 0
[Sambilight] 480x270 30ms
[Sambilight] Black border detection enabled
[Sambilight] TV Remote control support enabed
[Sambilight] -------------1-------------
[Sambilight] Name: 16:9
[Sambilight] Saturation Gain: 130%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 26%
[Sambilight] Vertical Depth: 15%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------2-------------
[Sambilight] Name: 21:9
[Sambilight] Saturation Gain: 120%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 15%
[Sambilight] Vertical Depth: 7%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 12%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------3-------------
[Sambilight] Name: 4:3
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 12%
[Sambilight] -------------4-------------
[Sambilight] Name: 3:2
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 8%
[Sambilight] 4 Profile(s) Loaded From Config
...still without success :cry:
UE46H7000 T-MST14DEUC 2130.0 rooted, OSCam r11704, Sambilight preparation in progress
tasshack
SamyGO Project Donor
Posts: 65
Joined: Thu Aug 23, 2018 5:54 am
Location: Istanbul, TURKEY

Re: [App] libSambilight E/F/H (MST-only)

Post by tasshack »

fromul wrote: Tue Feb 15, 2022 7:08 pm Today i tried manually run command from 01_99_Sambilight.init:

samyGOso -A -B -r -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:59 V_LEDS:32 BOTTOM_GAP:0 START_OFFSET:143 BAUDRATE:921600 CLOCKWISE:0 COLOR_ORDER:RGB CAPTURE_POS:0 BLACK_BORDER:1 CAPTURE_FREQ:30 TV_REMOTE:1 EXTERNAL:0 CAPTURE_SIZE:5 OSD_CAPTURE:1 GFX_LIB:1 TEST_FRAMES:0 TEST_PROFILE:0 TEST_PATTERN:0 TEST_SAVE_CAPTURE:0

but after few second got restart

log here:

Code: Select all

[Sambilight] SamyGO E/F/H libSambilight v1.2.11 - (c) tasshack 2019 - 2021
[Sambilight] _Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t [0xf38d30].
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t12SdMainChip_k' failed.
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP24SdVideoCommonFrameData_tP8SdRect_t12SdMainChip_k' failed.
[Sambilight] _Znwj [0xf3fc04].
[Sambilight] _ZN4SCGCC2El [0x1c40608].
[Sambilight] _ZN8SCBaseGC6CreateEv [0x1c4c540].
[Sambilight] _ZN4SCGC7DestroyEv [0x1c403cc].
[Sambilight] _ZN4SCGCD2Ev [0x1c4065c].
[Sambilight] _ZN4SCGC5ClearEPN6Shadow9BasicType4RectE [0x1c40ff4].
[Sambilight] _ZN8SCBaseGC5FlushEPN6Shadow9BasicType4RectE [0x1c4bc54].
[Sambilight] _ZN4SCGC8FillRectEN6Shadow5ColorEllll [0x1c4b528].
[Sambilight] _ZN4SCGC8DrawTextEllPtl [0x1c3cc7c].
[Sambilight] _ZN4SCGC11SetFontSizeEl [0x1c3d2dc].
[Sambilight] _ZN4SCGC7SetFontEP6SCFont [0x1c3c0dc].
[Sambilight] _ZN4SCGC12SetFontStyleEl [0x1c3ba8c].
[Sambilight] _ZN4SCGC10SetFgColorEN6Shadow5ColorE [0x3836a14].
[Sambilight] _ZN14CUSBAppResUtil14GetDefaultFontEv [0x256ca08].
[Sambilight] g_IPanel [0x420397a0].
[Sambilight] dlsym 'g_TaskManager' failed.
[Sambilight] g_pTaskManager [0x7302e54].
[Sambilight] g_TVViewerMgr [0x730deb8].
[Sambilight] dlsym 'g_pTVViewerMgr' failed.
[Sambilight] g_TVViewerWStringEng [0x719f928].
[Sambilight] dlsym 'g_WarningWStringEng' failed.
[Sambilight] dlsym 'g_pCustomTextResMgr' failed.
[Sambilight] dlsym 'g_CustomTextWStringEng' failed.
[Sambilight] _ZN16CResourceManager10GetWStringEi [0x150e41c].
[Sambilight] _ZN9PCWString7ConvertEPtPKciiPi [0xf419a8].
[Sambilight] _ZN12CTaskManager14GetApplicationE15DTV_APPLICATION [0x150fd84].
[Sambilight] _ZN10CViewerApp16GetViewerManagerEv [0x1980840].
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager11GetInstanceENS_13EDesktopIndexE' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager14GetApplicationEPKcS2_' failed.
[Sambilight] _ZN14CViewerManager15ShowSystemAlertEii [0x19c916c].
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEi' failed.
[Sambilight] _ZN14CViewerManager14ShowCustomTextEi [0x19c608c].
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEib' failed.
[Sambilight] dlsym '_ZN14CViewerManager10ShowRCModeEi' failed.
[Sambilight] dlsym '_ZN14CCustomTextApp13t_OnActivatedEPKci' failed.
[Sambilight] MsOS_PA2KSEG0 [0x41df6afc].
[Sambilight] MsOS_Dcache_Flush [0x41df6b2c].
[Sambilight] MApi_MMAP_GetInfo [0x41db9b24].
[Sambilight] MApi_XC_W2BYTEMSK [0x41ee7d64].
[Sambilight] gfx_InitNonGAPlane [0x41dcc1a8].
[Sambilight] gfx_ReleasePlane [0x41dd361c].
[Sambilight] gfx_CaptureFrame [0x41dc789c].
[Sambilight] gfx_BitBltScale [0x41dcdf2c].
[Sambilight] MApi_GOP_DWIN_CaptureOneFrame [0x41e10680].
[Sambilight] MApi_GOP_DWIN_GetWinProperty [0x41e0fe0c].
[Sambilight] _ZN10CViewerApp14t_OnInputOccurEPK7PTEvent [0x1996b04].
[Sambilight] Sambilight started
[Sambilight] H_LEDS: 59, V_LEDS: 32, BOTTOM_GAP: 0, START_OFFSET: 143, COLOR_ORDER: RGB, CAPTURE_POS: 0, CLOCKWISE: 0
[Sambilight] 480x270 30ms
[Sambilight] Black border detection enabled
[Sambilight] TV Remote control support enabed
[Sambilight] -------------1-------------
[Sambilight] Name: 16:9
[Sambilight] Saturation Gain: 130%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 26%
[Sambilight] Vertical Depth: 15%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------2-------------
[Sambilight] Name: 21:9
[Sambilight] Saturation Gain: 120%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 15%
[Sambilight] Vertical Depth: 7%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 12%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------3-------------
[Sambilight] Name: 4:3
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 12%
[Sambilight] -------------4-------------
[Sambilight] Name: 3:2
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 8%
[Sambilight] 4 Profile(s) Loaded From Config
...still without success :cry:
TV will crash if you try to run libSambilight while it is already been running at the background.
Everything seems fine on single shot mode log and sambilight should be working on your TV now.

Your problem must be on the esp8266 side or on electrical connection to the leds. Please check that your data pin, led type and led count is correct on the sketch also ground from leds must be connected to arduino too.

Sketch is compatible with Adalight protocol so you can test your hardware by installing Prismatik on your computer. If your esp8266 + leds works on the PC then it should work on your TV too.

You need to verify that your hardware is working before connecting it to TV.
fromul
SamyGO Project Donor
Posts: 47
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

Today i tried my led strip with other arduino board (Arduino Leonardo from my other project "CorsairLightning Protocol") and all LEDs shine
20220214_171715.jpg
20220214_171644.jpg
....but if i use my nodeMCU v3 (ESP 12E), uploaded your attached ino sketch (changed only led type to my WS2812B, number of led to 182) and result is: shine only first LED with static color (sometime white or green). - tested with Prismatik, Ambibox...not working (no or wrong communication with led strip)
20220216_191930 (1).jpg
Next i tried in Arduino IDE - file - Examples (examples from local library) - FastLED - Fire2021.ino - i changed data pin to 14, led type to WS2812B, number of leds on 182 and voila, LEDS shining like a fire.
20220216_164930.jpg
tested with other WS2812B led strip

1) connection to the leds is OK, GND to NodeMCU is too OK
2) data pin, led type and led counts are OK

I have 2 pieces of NodeMCU V3, first is with driver CH340G and second with driver CP2102....but both have same result with first shining led :cry:
So I think the attached INO sketch doesn't work with both my NodeMCU V3 ??? Is it possible?

only this INO sketch is working for me (changed number of leds, serial speed and data pin) with Prismatik (I'll try it tomorrow with my Sammy TV)
https://github.com/dmadison/Adalight-Fa ... astLED.ino
You do not have the required permissions to view the files attached to this post.
UE46H7000 T-MST14DEUC 2130.0 rooted, OSCam r11704, Sambilight preparation in progress
tasshack
SamyGO Project Donor
Posts: 65
Joined: Thu Aug 23, 2018 5:54 am
Location: Istanbul, TURKEY

Re: [App] libSambilight E/F/H (MST-only)

Post by tasshack »

fromul wrote: Wed Feb 16, 2022 7:32 pm Today i tried my led strip with other arduino board (Arduino Leonardo from my other project "CorsairLightning Protocol") and all LEDs shine
20220214_171715.jpg20220214_171644.jpg

....but if i use my nodeMCU v3 (ESP 12E), uploaded your attached ino sketch (changed only led type to my WS2812B, number of led to 182) and result is: shine only first LED with static color (sometime white or green). - tested with Prismatik, Ambibox...not working (no or wrong communication with led strip)
20220216_191930 (1).jpg
Next i tried in Arduino IDE - file - Examples (examples from local library) - FastLED - Fire2021.ino - i changed data pin to 14, led type to WS2812B, number of leds on 182 and voila, LEDS shining like a fire.
20220216_164930.jpg tested with other WS2812B led strip

1) connection to the leds is OK, GND to NodeMCU is too OK
2) data pin, led type and led counts are OK

I have 2 pieces of NodeMCU V3, first is with driver CH340G and second with driver CP2102....but both have same result with first shining led :cry:
So I think the attached INO sketch doesn't work with both my NodeMCU V3 ??? Is it possible?

only this INO sketch is working for me (changed number of leds, serial speed and data pin) with Prismatik (I'll try it tomorrow with my Sammy TV)
https://github.com/dmadison/Adalight-Fa ... astLED.ino
To work NodeMCU with FTDI, my sketch has Serial.swap(); line for disabling onboard CH340G/CP2102. Therefore you need to connect your PC via FTDI board as is on your TV, otherwise it wont work.
fromul
SamyGO Project Donor
Posts: 47
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

When I get home from work, I'm gonna try it, thx for this answer.
UE46H7000 T-MST14DEUC 2130.0 rooted, OSCam r11704, Sambilight preparation in progress
fromul
SamyGO Project Donor
Posts: 47
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

great, it working with PC Prismatik great, but in my SamyTV did´t working. After starting TV is´t created log file in /dtv/Sambilight.log. I mean the 01_99_Sambilight.init was´t ran.
...here is values of my 01_99_Sambilight.init file:

Code: Select all

#!/bin/sh
#
# (c) Copyright 1996 - 2021, SamyGO
#
#
. /dtv/SGO.env

##############################################################################################################################################

# Required Parameters
H_LEDS=59;				# Horizontal leds count (Top Side)
V_LEDS=32;				# Vertical leds count (Left/Right Side)
BOTTOM_GAP=0;			# Bottom side gap (Top Size - Bottom Size)
START_OFFSET=143;		# Index of first led (Top Left is zero) (H_LEDS + V_LEDS + (H_LEDS - BOTTOM_GAP / 2))

# Optional Parameters
COLOR_ORDER=RGB;		# Capture color order
CAPTURE_POS=0;			# Capture starts from bottom (Set to 1 for upside down and dont forget to change color order too)
CLOCKWISE=0;			# Led order (Set to 0 for anti-clockwise)
BLACK_BORDER=1;			# Black border detection for automatic profile switching (16:9, 21:9, 4:3, 3:2)
TV_REMOTE=1;			# Enable control with TV remote buttons (Red, Green, Yellow, Blue)
EXTERNAL=0;				# On/Off support for remotely connected leds (Handled on USB device)
BAUDRATE=921600;		# USB Serial baudrate (High baudrate is recommended)
GFX_LIB=1;				# Capture directly from graphics driver resulting +50 FPS and prevents UI from lagging during capture (Experimental! Tested on F)
CAPTURE_FREQ=30;		# Capture frequency in ms, increase this value if your TV having performance issues (Higher the value, lower the refresh rate. Smooting must be handled on USB device)
CAPTURE_SIZE=5;			# Higher capture size resulting less flickering and more accurate blacks but it affects overall FPS (1=96x54 2=160x90 3=240x135 4=320x180 5=480x270 6=960x540)
OSD_CAPTURE=1;			# Capture with OSD (Only works with GFX_LIB=1)

# For Testing
TEST_FRAMES=0;			# For configuration and performance testing (Set to 1 for single-shot mode)
TEST_PROFILE=0;			# Profile index for testing (Only for single-shot mode)
TEST_PATTERN=0;			# Display test pattern for selected profile (Only for single-shot mode)
TEST_SAVE_CAPTURE=0;	# Save capture as BMP to /dtv/Sambilight.bmp (Only for single-shot mode)
##############################################################################################################################################



PID=A
if [ $TV_REMOTE -eq 0 ]
then
	PID=T
fi

START_SAMBILIGHT="samyGOso -$PID -B -r -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:$H_LEDS V_LEDS:$V_LEDS BOTTOM_GAP:$BOTTOM_GAP START_OFFSET:$START_OFFSET BAUDRATE:$BAUDRATE CLOCKWISE:$CLOCKWISE COLOR_ORDER:$COLOR_ORDER CAPTURE_POS:$CAPTURE_POS BLACK_BORDER:$BLACK_BORDER CAPTURE_FREQ:$CAPTURE_FREQ TV_REMOTE:$TV_REMOTE EXTERNAL:$EXTERNAL CAPTURE_SIZE:$CAPTURE_SIZE OSD_CAPTURE:$OSD_CAPTURE GFX_LIB:$GFX_LIB TEST_FRAMES:$TEST_FRAMES TEST_PROFILE:$TEST_PROFILE TEST_PATTERN:$TEST_PATTERN TEST_SAVE_CAPTURE:$TEST_SAVE_CAPTURE";


case $1 in 
	start)
	$START_SAMBILIGHT
	;;
	stop)
	;;
	status)
	echo "No status info"
	;;
	*)
	echo "Usage: $0 {start|stop|status}" 1>&2
	exit 0
	;;
esac
...after starting shine only 1 led
20220217_160103.jpg
...if i ran manually testing cmd:
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:59 V_LEDS:32 BOTTOM_GAP:0 START_OFFSET:143 CLOCKWISE:0 CAPTURE_POS:0 COLOR_ORDER:RGB BAUDRATE:921600 TEST_FRAMES:1 TEST_PATTERN:0 TEST_PROFILE:0 TEST_SAVE_CAPTURE:1
result is great (but this is only testing static one frame shining):
20220217_171826.jpg
after this was log file created:

Code: Select all

[Sambilight] SamyGO E/F/H libSambilight v1.2.11 - (c) tasshack 2019 - 2021
[Sambilight] _Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t [0xf38d30].
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t12SdMainChip_k' failed.
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP24SdVideoCommonFrameData_tP8SdRect_t12SdMainChip_k' failed.
[Sambilight] _Znwj [0xf3fc04].
[Sambilight] _ZN4SCGCC2El [0x1c40608].
[Sambilight] _ZN8SCBaseGC6CreateEv [0x1c4c540].
[Sambilight] _ZN4SCGC7DestroyEv [0x1c403cc].
[Sambilight] _ZN4SCGCD2Ev [0x1c4065c].
[Sambilight] _ZN4SCGC5ClearEPN6Shadow9BasicType4RectE [0x1c40ff4].
[Sambilight] _ZN8SCBaseGC5FlushEPN6Shadow9BasicType4RectE [0x1c4bc54].
[Sambilight] _ZN4SCGC8FillRectEN6Shadow5ColorEllll [0x1c4b528].
[Sambilight] _ZN4SCGC8DrawTextEllPtl [0x1c3cc7c].
[Sambilight] _ZN4SCGC11SetFontSizeEl [0x1c3d2dc].
[Sambilight] _ZN4SCGC7SetFontEP6SCFont [0x1c3c0dc].
[Sambilight] _ZN4SCGC12SetFontStyleEl [0x1c3ba8c].
[Sambilight] _ZN4SCGC10SetFgColorEN6Shadow5ColorE [0x3836a14].
[Sambilight] _ZN14CUSBAppResUtil14GetDefaultFontEv [0x256ca08].
[Sambilight] g_IPanel [0x420397a0].
[Sambilight] dlsym 'g_TaskManager' failed.
[Sambilight] g_pTaskManager [0x7302e54].
[Sambilight] g_TVViewerMgr [0x730deb8].
[Sambilight] dlsym 'g_pTVViewerMgr' failed.
[Sambilight] g_TVViewerWStringEng [0x719f928].
[Sambilight] dlsym 'g_WarningWStringEng' failed.
[Sambilight] dlsym 'g_pCustomTextResMgr' failed.
[Sambilight] dlsym 'g_CustomTextWStringEng' failed.
[Sambilight] _ZN16CResourceManager10GetWStringEi [0x150e41c].
[Sambilight] _ZN9PCWString7ConvertEPtPKciiPi [0xf419a8].
[Sambilight] _ZN12CTaskManager14GetApplicationE15DTV_APPLICATION [0x150fd84].
[Sambilight] _ZN10CViewerApp16GetViewerManagerEv [0x1980840].
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager11GetInstanceENS_13EDesktopIndexE' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager14GetApplicationEPKcS2_' failed.
[Sambilight] _ZN14CViewerManager15ShowSystemAlertEii [0x19c916c].
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEi' failed.
[Sambilight] _ZN14CViewerManager14ShowCustomTextEi [0x19c608c].
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEib' failed.
[Sambilight] dlsym '_ZN14CViewerManager10ShowRCModeEi' failed.
[Sambilight] dlsym '_ZN14CCustomTextApp13t_OnActivatedEPKci' failed.
[Sambilight] MsOS_PA2KSEG0 [0x41df6afc].
[Sambilight] MsOS_Dcache_Flush [0x41df6b2c].
[Sambilight] MApi_MMAP_GetInfo [0x41db9b24].
[Sambilight] MApi_XC_W2BYTEMSK [0x41ee7d64].
[Sambilight] gfx_InitNonGAPlane [0x41dcc1a8].
[Sambilight] gfx_ReleasePlane [0x41dd361c].
[Sambilight] gfx_CaptureFrame [0x41dc789c].
[Sambilight] gfx_BitBltScale [0x41dcdf2c].
[Sambilight] MApi_GOP_DWIN_CaptureOneFrame [0x41e10680].
[Sambilight] MApi_GOP_DWIN_GetWinProperty [0x41e0fe0c].
[Sambilight] Sambilight started
[Sambilight] H_LEDS: 59, V_LEDS: 32, BOTTOM_GAP: 0, START_OFFSET: 143, COLOR_ORDER: RGB, CAPTURE_POS: 0, CLOCKWISE: 0
[Sambilight] 480x270 30ms
[Sambilight] Black border detection enabled
[Sambilight] -------------1-------------
[Sambilight] Name: 16:9
[Sambilight] Saturation Gain: 130%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 26%
[Sambilight] Vertical Depth: 15%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------2-------------
[Sambilight] Name: 21:9
[Sambilight] Saturation Gain: 120%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 15%
[Sambilight] Vertical Depth: 7%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 12%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------3-------------
[Sambilight] Name: 4:3
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 12%
[Sambilight] -------------4-------------
[Sambilight] Name: 3:2
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 8%
[Sambilight] 4 Profile(s) Loaded From Config
[Sambilight] Serial available /dev/ttyUSB0 @921600
[Sambilight] Serial open
[Sambilight] Led manager init
[Sambilight] Panel size 1920x1080
[Sambilight] gfx_lib not enabled
[Sambilight] Test Started
[Sambilight] Grabbing started
[Sambilight] Capture saved to /dtv/Sambilight.bmp
[Sambilight] Sambilight ended
[Sambilight] lib_deinit
But automatic runing of libSambilight.so via init file not working :-/ . All files are right in folders with changed attributes on 755:
1.png
2.png
Folder /dtv/ after starting up system ....file Sambilight.log missing :cry:
3.png
You do not have the required permissions to view the files attached to this post.
UE46H7000 T-MST14DEUC 2130.0 rooted, OSCam r11704, Sambilight preparation in progress
fromul
SamyGO Project Donor
Posts: 47
Joined: Sat Feb 01, 2020 11:07 am
Location: Czech Republic

Re: [App] libSambilight E/F/H (MST-only)

Post by fromul »

if i removed file from init.d/01_99_Sambilight.init, reboot TV and tried run library manually with this command:

samyGOso -A -B -r -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:59 V_LEDS:32 BOTTOM_GAP:0 START_OFFSET:150 BAUDRATE:921600 CLOCKWISE:0 COLOR_ORDER:RGB CAPTURE_POS:0 BLACK_BORDER:1 CAPTURE_FREQ:30 TV_REMOTE:1 EXTERNAL:0 CAPTURE_SIZE:5 OSD_CAPTURE:1 GFX_LIB:1 TEST_FRAMES:0 TEST_PROFILE:0 TEST_PATTERN:0 TEST_SAVE_CAPTURE:0

TV get after a few seconds reboot, but if i´ll change parameter GFX_LIB:1 to GFX_LIB:0, Sambilight grab pictures and shine, but the light looked jerky:
http://vip.5.dl.wsfiles.cz/7037/jWLl7WL ... 180052.mp4

here is changed file 01_99_Sambilight.init....but still not working for successful autostart implementation:

Code: Select all

#!/bin/sh
#
# (c) Copyright 1996 - 2021, SamyGO
#
#
. /dtv/SGO.env

##############################################################################################################################################

# Required Parameters
H_LEDS=59;				# Horizontal leds count (Top Side)
V_LEDS=32;				# Vertical leds count (Left/Right Side)
BOTTOM_GAP=0;			# Bottom side gap (Top Size - Bottom Size)
START_OFFSET=150;		# Index of first led (Top Left is zero) (H_LEDS + V_LEDS + (H_LEDS - BOTTOM_GAP / 2))

# Optional Parameters
COLOR_ORDER=RGB;		# Capture color order
CAPTURE_POS=0;			# Capture starts from bottom (Set to 1 for upside down and dont forget to change color order too)
CLOCKWISE=0;			# Led order (Set to 0 for anti-clockwise)
BLACK_BORDER=1;			# Black border detection for automatic profile switching (16:9, 21:9, 4:3, 3:2)
TV_REMOTE=1;			# Enable control with TV remote buttons (Red, Green, Yellow, Blue)
EXTERNAL=0;				# On/Off support for remotely connected leds (Handled on USB device)
BAUDRATE=921600;		# USB Serial baudrate (High baudrate is recommended)
GFX_LIB=0;				# Capture directly from graphics driver resulting +50 FPS and prevents UI from lagging during capture (Experimental! Tested on F)
CAPTURE_FREQ=30;		# Capture frequency in ms, increase this value if your TV having performance issues (Higher the value, lower the refresh rate. Smooting must be handled on USB device)
CAPTURE_SIZE=5;			# Higher capture size resulting less flickering and more accurate blacks but it affects overall FPS (1=96x54 2=160x90 3=240x135 4=320x180 5=480x270 6=960x540)
OSD_CAPTURE=1;			# Capture with OSD (Only works with GFX_LIB=1)

# For Testing
TEST_FRAMES=0;			# For configuration and performance testing (Set to 1 for single-shot mode)
TEST_PROFILE=0;			# Profile index for testing (Only for single-shot mode)
TEST_PATTERN=0;			# Display test pattern for selected profile (Only for single-shot mode)
TEST_SAVE_CAPTURE=0;	# Save capture as BMP to /dtv/Sambilight.bmp (Only for single-shot mode)
##############################################################################################################################################



PID=A
if [ $TV_REMOTE -eq 0 ]
then
	PID=T
fi

START_SAMBILIGHT="samyGOso -$PID -B -r -l /mnt/opt/privateer/usr/libso/libSambilight.so H_LEDS:$H_LEDS V_LEDS:$V_LEDS BOTTOM_GAP:$BOTTOM_GAP START_OFFSET:$START_OFFSET BAUDRATE:$BAUDRATE CLOCKWISE:$CLOCKWISE COLOR_ORDER:$COLOR_ORDER CAPTURE_POS:$CAPTURE_POS BLACK_BORDER:$BLACK_BORDER CAPTURE_FREQ:$CAPTURE_FREQ TV_REMOTE:$TV_REMOTE EXTERNAL:$EXTERNAL CAPTURE_SIZE:$CAPTURE_SIZE OSD_CAPTURE:$OSD_CAPTURE GFX_LIB:$GFX_LIB TEST_FRAMES:$TEST_FRAMES TEST_PROFILE:$TEST_PROFILE TEST_PATTERN:$TEST_PATTERN TEST_SAVE_CAPTURE:$TEST_SAVE_CAPTURE";


case $1 in 
	start)
	$START_SAMBILIGHT
	;;
	stop)
	;;
	status)
	echo "No status info"
	;;
	*)
	echo "Usage: $0 {start|stop|status}" 1>&2
	exit 0
	;;
esac
here is log from this "semi-function/jerky" Sambilight:

Code: Select all

[Sambilight] SamyGO E/F/H libSambilight v1.2.11 - (c) tasshack 2019 - 2021
[Sambilight] _Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t [0xf38d30].
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t12SdMainChip_k' failed.
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP24SdVideoCommonFrameData_tP8SdRect_t12SdMainChip_k' failed.
[Sambilight] _Znwj [0xf3fc04].
[Sambilight] _ZN4SCGCC2El [0x1c40608].
[Sambilight] _ZN8SCBaseGC6CreateEv [0x1c4c540].
[Sambilight] _ZN4SCGC7DestroyEv [0x1c403cc].
[Sambilight] _ZN4SCGCD2Ev [0x1c4065c].
[Sambilight] _ZN4SCGC5ClearEPN6Shadow9BasicType4RectE [0x1c40ff4].
[Sambilight] _ZN8SCBaseGC5FlushEPN6Shadow9BasicType4RectE [0x1c4bc54].
[Sambilight] _ZN4SCGC8FillRectEN6Shadow5ColorEllll [0x1c4b528].
[Sambilight] _ZN4SCGC8DrawTextEllPtl [0x1c3cc7c].
[Sambilight] _ZN4SCGC11SetFontSizeEl [0x1c3d2dc].
[Sambilight] _ZN4SCGC7SetFontEP6SCFont [0x1c3c0dc].
[Sambilight] _ZN4SCGC12SetFontStyleEl [0x1c3ba8c].
[Sambilight] _ZN4SCGC10SetFgColorEN6Shadow5ColorE [0x3836a14].
[Sambilight] _ZN14CUSBAppResUtil14GetDefaultFontEv [0x256ca08].
[Sambilight] g_IPanel [0x420397a0].
[Sambilight] dlsym 'g_TaskManager' failed.
[Sambilight] g_pTaskManager [0x7302e54].
[Sambilight] g_TVViewerMgr [0x730deb8].
[Sambilight] dlsym 'g_pTVViewerMgr' failed.
[Sambilight] g_TVViewerWStringEng [0x719f928].
[Sambilight] dlsym 'g_WarningWStringEng' failed.
[Sambilight] dlsym 'g_pCustomTextResMgr' failed.
[Sambilight] dlsym 'g_CustomTextWStringEng' failed.
[Sambilight] _ZN16CResourceManager10GetWStringEi [0x150e41c].
[Sambilight] _ZN9PCWString7ConvertEPtPKciiPi [0xf419a8].
[Sambilight] _ZN12CTaskManager14GetApplicationE15DTV_APPLICATION [0x150fd84].
[Sambilight] _ZN10CViewerApp16GetViewerManagerEv [0x1980840].
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager11GetInstanceENS_13EDesktopIndexE' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager14GetApplicationEPKcS2_' failed.
[Sambilight] _ZN14CViewerManager15ShowSystemAlertEii [0x19c916c].
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEi' failed.
[Sambilight] _ZN14CViewerManager14ShowCustomTextEi [0x19c608c].
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEib' failed.
[Sambilight] dlsym '_ZN14CViewerManager10ShowRCModeEi' failed.
[Sambilight] dlsym '_ZN14CCustomTextApp13t_OnActivatedEPKci' failed.
[Sambilight] MsOS_PA2KSEG0 [0x41df6afc].
[Sambilight] MsOS_Dcache_Flush [0x41df6b2c].
[Sambilight] MApi_MMAP_GetInfo [0x41db9b24].
[Sambilight] MApi_XC_W2BYTEMSK [0x41ee7d64].
[Sambilight] gfx_InitNonGAPlane [0x41dcc1a8].
[Sambilight] gfx_ReleasePlane [0x41dd361c].
[Sambilight] gfx_CaptureFrame [0x41dc789c].
[Sambilight] gfx_BitBltScale [0x41dcdf2c].
[Sambilight] MApi_GOP_DWIN_CaptureOneFrame [0x41e10680].
[Sambilight] MApi_GOP_DWIN_GetWinProperty [0x41e0fe0c].
[Sambilight] _ZN10CViewerApp14t_OnInputOccurEPK7PTEvent [0x1996b04].
[Sambilight] Sambilight started
[Sambilight] H_LEDS: 59, V_LEDS: 32, BOTTOM_GAP: 0, START_OFFSET: 150, COLOR_ORDER: RGB, CAPTURE_POS: 0, CLOCKWISE: 0
[Sambilight] 480x270 30ms
[Sambilight] Black border detection enabled
[Sambilight] TV Remote control support enabed
[Sambilight] -------------1-------------
[Sambilight] Name: 16:9
[Sambilight] Saturation Gain: 130%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 26%
[Sambilight] Vertical Depth: 15%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------2-------------
[Sambilight] Name: 21:9
[Sambilight] Saturation Gain: 120%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 15%
[Sambilight] Vertical Depth: 7%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 12%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------3-------------
[Sambilight] Name: 4:3
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 12%
[Sambilight] -------------4-------------
[Sambilight] Name: 3:2
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 8%
[Sambilight] 4 Profile(s) Loaded From Config
[Sambilight] Serial available /dev/ttyUSB0 @921600
[Sambilight] Serial open
[Sambilight] Led manager init
[Sambilight] Panel size 1920x1080
[Sambilight] gfx_lib not enabled
[Sambilight] Grabbing started
have you any idea?
UE46H7000 T-MST14DEUC 2130.0 rooted, OSCam r11704, Sambilight preparation in progress
tasshack
SamyGO Project Donor
Posts: 65
Joined: Thu Aug 23, 2018 5:54 am
Location: Istanbul, TURKEY

Re: [App] libSambilight E/F/H (MST-only)

Post by tasshack »

If you start libSambilight from telnet it will be very slow compared to init.d that is normal and you should be enable gfx_lib to 1 for TV performance.

I think you should create a new init file from telnet. Text files can act differently on linux when edited from windows.

Post Reply

Return to “[F] Software”